선체-프로펠러와 고양력 혼타의 상호작용에 관한 연구
A Study on the Interaction between Hull-Propeller and a High-Lifting Horn-type Rudder
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Rudder is to be located in extremely complicated flows generated and disturbed behind a hull and a propeller in operation. In order to estimate the rudder efficiency, it is quite important to investigate the disturbed flows due to the interaction under the hull-propeller and rudder condition. The purpose of the present research is to investigate the interaction between the hull-propeller and a high-lifting horn-type rudder through both numerical computations and experiments. A horn-type rudder implementing the Coanda effect of USB (Upper Surface Blowing) type is selected for its high efficiency of lifting force, and a 1/85 scaled model of 47K PC(Product Carrier) is manufactured for the purpose of the model test. The forces acting on the rudder during the experiment are measured using a three-component force gauge. Both cases are investigated in the hull-propeller-rudder condition and rudder open-water condition,which confirms that the flows generated under the former condition is considerably different from that of the latter condition.
Abstract
Rudder is to be located in extremely complicated flows generated and disturbed behind a hull and a propeller in operation. In order to estimate the rudder efficiency, it is quite important to investigate the disturbed flows due to the interaction under the hull-propeller and rudder condition. The purpose of the present research is to investigate the interaction between the hull-propeller and a high-lifting horn-type rudder through both numerical computations and experiments. A horn-type rudder implementing the Coanda effect of USB (Upper Surface Blowing) type is selected for its high efficiency of lifting force, and a 1/85 scaled model of 47K PC(Product Carrier) is manufactured for the purpose of the model test. The forces acting on the rudder during the experiment are measured using a three-component force gauge. Both cases are investigated in the hull-propeller-rudder condition and rudder open-water condition,which confirms that the flows generated under the former condition is considerably different from that of the latter condition.
참고문헌 (12)
- Ahn, H.S., "An Experimental Study of the Coanda Effect on Flapped Control Surface", 박사, pp.2003
- Ahn, H.S, "An Application of Coanda Effect to a Flapped Rudder", J. of Ship and Ocean Technology, 3(4), pp.23~24 (1999)
- Boo, K.T, "Simulation of viscous flow around the ship appended with the propeller and the rudder, Proceedings", Annual Autumn Meeting of SNAK, pp.527~531 (2004)
- 부경태, "수치 해석에 의한 단독 타 유체력 계산", 대한조선학회 논문집, 41(2), pp.61~69 (2004), 대한조선학회
- Carlton, J, "Rudder-Propeller-Hull Interaction: The Results of Some Recent Research, In-Service Problems and Their Solutions", International Symposium on Marine Propulsors (2009)
- Choi, B.J., "An Experimental Evaluation of the Coanda Jet Applied High-Lifting Rudder System", 석사, pp.2004
- Molland, A.F, "Marine Rudder and Control Surfaces" (2007)
- 백부근, "프로펠러 및 선미반류에 의해 영향을 받는 혼-타의 캐비테이션 관찰 및 간극 유동에 대한 가시화 연구", 대한조선학회 논문집, 45(3), pp.238~246 (2008), 대한조선학회
- Park, J.J, "A Numerical Study on a Circulation Control Foil using Coanda Effect", Journal of the Society of Naval Architects of Korea, 37(2), pp.70~76 (2000)
- 이영길, "캐비테이션 감소를 위한 혼타의 형상 연구", 대한조선학회 논문집, 47(4), pp.553~564 (2010), 대한조선학회
- 서대원, "제트 노즐의 배치가 콴다 날개의 성능에 미치는 영향", 대한조선학회 논문집, 45(6), pp.569~578 (2008), 대한조선학회
- 이승희, "콴다 효과를 이용한 혼-타의 양력성능 개선에 관한 연구", 대한조선학회 논문집, 47(4), pp.543~552 (2010), 대한조선학회