선박의 거동 및 파랑하중 계산을 위한 약산식 비교 검토
A Comparison Study on the Simplified Formulae for Ship Motion and Global Loads in Waves
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The global performance of various ships estimated by simplified formulae of classification societies is compared with the numerical results by a strip-theory-based whipping analysis program including slamming impact(USLAM). Heave acceleration, pitch angle and the vertical acceleration are compared and the effectiveness of simplified formulae is evaluated. Four different ship models are used for comparison study, which include S175, Flokstra, 6000TEU and 8100TEU container ships. In order to verify the numerical results, the vertical bending moment of S175 is compared with the results of ITTC workshop data.
Abstract
The global performance of various ships estimated by simplified formulae of classification societies is compared with the numerical results by a strip-theory-based whipping analysis program including slamming impact(USLAM). Heave acceleration, pitch angle and the vertical acceleration are compared and the effectiveness of simplified formulae is evaluated. Four different ship models are used for comparison study, which include S175, Flokstra, 6000TEU and 8100TEU container ships. In order to verify the numerical results, the vertical bending moment of S175 is compared with the results of ITTC workshop data.
참고문헌 (18)
- ABS, "Guide For Slamming Loads And Strength Assessment For Vessels", American Bureau of Shipping, ~ (2011)
- Bishop, R.E.D., "Hydro- elasticity of Ships" (1979), Cambridge University Press
- Class NK, "Guidelines for Container Carrier Structures. Guidelines for Direct Strength Analysis, Revised edition, Chap. 5.2 Ship Motion and Acceleration", Nippon Kaiji Kyokai, ~ (2011)
- DNV, "Hull Structural Design, Ships with Length100 meters and above. Design Loads, Section 4.Det Norske Veritas", ~ (2012)
- Flokstra, C., "Comparison of Ship Motion Theories with Experiments for a Containership", International Shipbuilding Progress, 21, pp.168~189 (1974)
- Gerritsma, J., "The Distribution of the Hydrodynamic Forces on a Heaving and Pitching Ship Model in Still Water", Fifth Symposium on Naval Hydrodynamics, pp.219~251 (1964)
- 황지희, "모멘텀 슬래밍을 고려한 선체 운동 및 파랑하중 해석", 대한조선학회 논문집, 49(2), pp.109~115 (2012), 대한조선학회
- ITTC, "Comparative study on Linear and Nonlinear Ship Motion and Loads", ITTC workshop on seakeeping, pp.283~347 (2010)
- Jensen, J.J., "Wave-induced Bending Moments in Ships-a Quadratic Theory", Royal Inst Naval Architects Supplementary Papers, 121, pp.151~165 (1978)
- Jensen, J.J., "Wave-induced Ship Hull Vibrations in Stochastic Seaways", Marine Structures, 9, pp.353~387 (1996)
- Kawakami, M., "Prediction of long term whipping vibration stress due to slamming of large full ships in rough seas", International Shipbuilding Progress, 24, pp.83~110 (1977)
- 이탁기, "대형 컨테이너선의 플레어 슬래밍 계측 연구 (Ⅱ)- 슬래밍 압력 특성 분석 -", 대한조선학회 논문집, 44(3), pp.279~284 (2007), 대한조선학회
- Ochi, M. K., "Ship Slamming-Hydrodynamic Impact between waves and Ship Bottom Forward", Symposium on Fluid-Solid interaction, The American Society of Mechanical Engineers (1967)
- Ochi, M.K., "Prediction of Slamming Characteristics and Hull Responses for Ship Design", The Society of Naval Architects and Marine Engineers Transportation, 81, pp.144~176 (1973)
- 신현경, "낙하실험에 의한 슬래밍 충격의 실험 연구", 대한조선학회 논문집, 47(3), pp.410~420 (2010), 대한조선학회
- Stavovy, A.B., "Analytic Determination of Slamming Pressure for High-Speed Vehicles in Waves", Journal Ship Research, 20(4), pp.190~198 (1976)
- Wang, Z., "Effects of Whipping on Design Bending Moments of an Ultra Large Container Ship", Proceedings of the Annual autumn Meeting, SNAK, pp.3~4 (2011)
- Yamamoto, Y., "Motion and Longitudinal Strength of a Ship in Head Sea and the Effects of Non-linearities", Journal of the Society of Naval Architects of Japan, 143, pp.63~70 (1979)