Investigation of Some Blast Design and Evaluation Parameters for Fragmentation in Limestone Quarries
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The present paper highlights some important fragmentation issues experienced in the limestone quarry blast rounds. In light of these major issues, the paper outlines influence of a few important design parameters, which bear merit to alter the blast performance in order to duly resolve the issues in field scale blast rounds. A comprehensive field based program for evaluation of such blast rounds has also been suggested. The knowledge disseminated in the paper, backed up by sufficient images, is largely based on the experience of the authors, while designing, implementing and evaluating numerous field scale blast rounds in cement grade limestone quarries.
Abstract
The present paper highlights some important fragmentation issues experienced in the limestone quarry blast rounds. In light of these major issues, the paper outlines influence of a few important design parameters, which bear merit to alter the blast performance in order to duly resolve the issues in field scale blast rounds. A comprehensive field based program for evaluation of such blast rounds has also been suggested. The knowledge disseminated in the paper, backed up by sufficient images, is largely based on the experience of the authors, while designing, implementing and evaluating numerous field scale blast rounds in cement grade limestone quarries.
참고문헌 (33)
- Ash, R.L., "The mechanics of rock breakage, pt I-IV", Pit & Quarry, 56, pp.98~131 (1963)
- Ash, R.L., "Changing borehole length to improve breakage – A case history", Proc. 2nd SEE Conf. Expl. & Blast. Tech., pp.1~12 (1976)
- Bhandari, S., "Rock fragmentation with longitudinal explosive charges", Proc. 3rd Cong. Int. Soc. Rock Mech., 2(B), pp.1323~1342 (1974)
- Bhandari, S., "Engineering rock blasting operations" (1997), A.A. Balkema
- Brown, T.R., "Open cut drilling and blasting practice", Workshop Course on Drilling and blasting, pp.11~11 (1973), Aust. Min. Found. Inc.
- Chiapetta, R.F., "An update on causes and recommendations for controlling coal damage when blasting overburden", Proc. Explo-95, Brisbane, pp.345~360 (1995)
- A study of fragmentation from bench blasting in limestone at a reduced scale, "Dick, R.A.", U.S.B.M. R.I., 24~24, pp.No. 7704 (1973)
- Hagan, T.N., "The influence of controllable blast parameters on fragmentation and mining costs", Proc. 1st Int. Symp. on Rock Fragmentation by Blasting, pp.31~51 (1983)
- Jhanwar, J.C., "Application of air decks in production blasting to improve fragmentation and economies of an open pit mine", Geotech. & Geol. Engg. Jl., 417, pp.37~57 (1999)
- Jhanwar, J.C., "Influence of air deck blasting on fragmentation in jointed rocks in an open-pit manganese mine", Engg. Geol. Jour., 57, pp.13~29 (2000)
- Jimeno, C.L., "Drilling and blasting of rocks" (1995), A.A. Balkema
- Kanchibotla, S.S., "Optimum blasting? Is it minimum cost per broken rock or maximum value per broken rock?", Proc. Explo-2001, NSW, Aus, pp.35~40 (2001)
- Konya, C.J., "Surface blast design" (1990), Prentice Hall
- Konya, C.J., "Problems with deck loaded blast holes", Eng. & Min Jl., 73 (1996)
- Langefors, U., "Fragmentation in rock blasting", Proc. 7th Symp. on Rock Mechanics, pp.1~21 (1965), Pennsylvania State University
- Lindgren, G., "Mechanization at Reustrom", Mining Magazine, 125(3), pp.188~197 (1971)
- Maerz, H.N., "Measurement of rock fragmentation by digital photoanalysis", 5th Int. Cong. Int. Soc. Rock Mech., pp.687~692 (1987)
- Maerz, N.H., "Photoanalysis of rock fabric", 박사, pp.1990
- Marton, A., "Case study in optimizing fragmentation", The AusIMM Procs, 1, pp.35~43 (1999)
- Oliver, P.H., "Changes to drill pattern and adequate inter-row delay time improve blasting performance", Canadian Institute of Mining (CIM) Bulletin, 96, pp.60~65 (2003)
- Ouchterlony, F., "Review of rock blasting and explosives engineering research at Sve De Fo", Proc. Explo-95, pp.133~146 (1995), AusIMM
- Pugliese, J.M., "Designing blast patterns using empirical formulas", USBM IC 8550, 33~33 (1972)
- Rai, P., "Blast design vis-à-vis evaluation of fragmentation by indirect methods in a limestone quarry", Proc. Korea-Japan Joint Symp. on Rock Engineering, pp.299~306 (2009)
- Rai, P., "Investigation of various firing patterns on different sand stone benches of a surface coal mine – a case study", Blasting & Fragmentation Jl, 2(2), pp.127~145 (2008), ISEE Pub
- Rai, P., "Investigation of firing patterns on fragmentation in Indian opencast limestone mine", Quarry Management, pp.21~30 (2004)
- Rai, P., "Evaluation of effect of some blast design parameters on fragmentation in opencast mine", 박사, pp.2002
- Rai, P., "Mesh area vis-à-vis blast performance in a limestone quarry – a case study", Fragblast, The Int. Jl. for Blasting and Fragmentation, 9(4), pp.219~232 (2005)
- Scott, A., "The challenge of the prediction and control of fragmentation in mining", Proc. 4th Int. Symp. on Rock Fragmentation by Blasting, pp.507~518 (1996)
- Singh, S.P., "Effect of muck size distribution on scooping operations", J. Int. Soc. Expl. Engrs., 1, pp.315~325 (2002)
- Smith, N.S., "Burden rock stiffness and its effects on fragmentation in bench blasting", 박사, pp.1976
- Tansey, D.O., "A delay sequencing blasting system", Proc. 6th SEE Conf. Expl. & Blasting Tech., pp.345~374 (1980)
- Wang, W., "Image analysis of fragment size and shape", Proc. Fragblast-5, pp.233~243 (1996)
- Williamson, S.,, "Electric shovel performance as a measure of blasting efficiency", Proc. 1st Int. Symp. on Rock Fragmentation by Blasting, pp.625~635 (1983)