민감도 해석을 통한 선체 부가물이 함정의 조종성능에 미치는 영향 분석
The Effect of Hull Appendages on Maneuverability of Naval Ship by Sensitivity Analysis
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Naval ships have hull appendages which are more exposed to the outside because of its small block coefficient compared with commercial ships. These exposed hull appendages like skeg, strut and shaft line affect the maneuverability of a ship. The effect of hull appendages has considered at initial design stage to estimate more accurate maneuverability. In this paper, sensitivity analysis is used to analyze the effect on maneuverability by hull appendages. 3 DOF maneuvering equations based on Mathematical Modelling Group (MMG) model are used and propeller & rudder model are modified to reflect the characteristics of twin propeller & twin rudder. Numerical maneuvering simulations (Turning test, Zig-zag test) for benchmark naval vessel, David Taylor Model Basin (DTMB) 5415 are performed. In every simulation, it is calculated that stability indices and maneuverability characteristics (Tactical Dia., Advance, 1st Overshoot, Time of complete cycle) with respect to the parameters (area times lift coefficient slope, attachment location) of hull appendages. As a result, two regression formulas are established. One is the relation of maneuverability characteristics and stability indices and the other is the relation of stability indices and hull appendages.
Abstract
Naval ships have hull appendages which are more exposed to the outside because of its small block coefficient compared with commercial ships. These exposed hull appendages like skeg, strut and shaft line affect the maneuverability of a ship. The effect of hull appendages has considered at initial design stage to estimate more accurate maneuverability. In this paper, sensitivity analysis is used to analyze the effect on maneuverability by hull appendages. 3 DOF maneuvering equations based on Mathematical Modelling Group (MMG) model are used and propeller & rudder model are modified to reflect the characteristics of twin propeller & twin rudder. Numerical maneuvering simulations (Turning test, Zig-zag test) for benchmark naval vessel, David Taylor Model Basin (DTMB) 5415 are performed. In every simulation, it is calculated that stability indices and maneuverability characteristics (Tactical Dia., Advance, 1st Overshoot, Time of complete cycle) with respect to the parameters (area times lift coefficient slope, attachment location) of hull appendages. As a result, two regression formulas are established. One is the relation of maneuverability characteristics and stability indices and the other is the relation of stability indices and hull appendages.
참고문헌 (19)
- Ankudinov, V., "Assessment and principal structure of the modular mathematical model for ship manoeuvrability prediction and real time manoeuvring simulation", ’93 International Conference on Marine Simulation and Ship Manoeuvrability (MARSIM), pp.661~ (1993), St. John’s, Newfoundland
- Pmm Model Test with DDG51 Including Uncertainty Assessment, "Benedetti, L.", INSEAN, ~, pp.Insean Report No.14 (2006)
- Biancardi, C. G., "An Alternative Methodology for Calculating Ship Manoeuvring Coefficients at the Design State", International Shipbuilding Progress, 44(440), pp.273~297 (1997)
- Carrica, P.M., "Turn and Zigzag maneuvers of a Surface Combatant Using a URANS Approach with Dynamic Overset Grids", Journal of Marine Science and Technology, 18(2), pp.166~181 (2008)
- Dubbioso, G, "Aspects of Twin Screw Ships Semi-Empirical Maneuvering Models", Ocean Engineering, 48, pp.69~80 (2012)
- Hess, D.E., "Real-time nonlinear simulation of maneuvers for US navy combatant DTMB 5415", Workshop on Verification and Validation of Ship Manoeuvering Simulation Methods (SIMMAN) 2008, pp.E15~E21 (2008)
- Method of Predicting Course Stability and Turning Qualities of Ships, "Jacobs, W. R.", Davidson Laboratory, ~, pp.Davidson Laboratory Report 945 (1963)
- 김연규, "쌍축 컨테이너선의 조종성능 특성 연구", 대한조선학회 논문집, 43(1), pp.731~737 (2006), 대한조선학회
- Kose, K., "Concrete of mathematical model for ship maneuverability", Proceedings of the 3rd Symposium on Ship Maneuverability, pp.27~80 (1981), Society of Naval Architects of Japan
- Lee, H.Y, "An Experimental Study on the Effect of Afterbody Appendages and Hull Form on the Manoeuvrability of a Container Carrier", Journal of the Society of Naval Architects of Korea, 35(3), pp.38~45 (1998)
- Lee, S.K, "Research on the Prediction of Maneuvering Motion for a Twin-Screw Twin-Rudder Ship", Journal of Korean Institute of Navigation, 21(1), pp.103~108 (1997)
- Lee, S.K., "Assessment of a Mathematical Model for the Manoeuvring Motion of a Twin-Propeller Twin-Rudder Ship", International Shipbuilding Progress, 50(1), pp.109~123 (2003)
- Miller, R. W., "PMM calculations for the bare and Appended DTMB 5415 using the RANS Solver CFDSHIP-IOWA", Workshop on Verification and Validation of Ship Manoeuvering Simulation Methods (SIMMAN) 2008, pp.F41~F47 (2008)
- Saltelli, A., "Sensitivity Analysis" (2001), John wiley & Sons Inc
- Sohn, K.H., "A Study on Mathematical Model of Manoeuvring Motions of Twin-screw and Twin-rudder Ship for Construction of Real-time Ship-handling Simulator", Journal of the Korean Society of Marine Environment & Safety, 7(3), pp.1~16 (2001)
- Toxopeus, S., "Comparison of manoeuvring simulation programs for SIMMAN test cases", Workshop on Verification and Validation of Ship Manoeuvering Simulation Methods (SIMMAN) 2008, pp.E56~E61 (2008)
- 여동진, "수중운동체의 조종성능에 대한 민감도 해석법의 적용", 대한조선학회 논문집, 42(5), pp.458~465 (2005), 대한조선학회
- 여동진, "잠수함의 설계 인자들에 대해 안정성 지수가 가지는 민감도 해석", 대한조선학회 논문집, 43(4), pp.521~528 (2006), 대한조선학회
- Yoon, H., "Phase-averaged stereo-PIV flow field and force", moment, 박사, pp.Iowa University[DOI]