Hashin·Puck 파손기준 기반 적층 복합재료의 섬유 및 기지파손 평가에 관한 연구
A Study on the Evaluation of Fiber and Matrix Failures for Laminated Composites using Hashin·Puck Failure Criteria
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
In the present study, the fiber and matrix failure of composite laminates under arbitrary biaxial stresses were evaluated based onseparate mode criteria such as Hasnin and Puck theories. There is a limitation to predict the fiber-dominant and/or matrix-dominantfailures under arbitrary stress states using limit criteria (maximum stress and maximum strain theories) and interactive criteria (Tsai-Hilland Tsai-Wu theories). There is little literature for failure analysis of ships and offshore composite structures considering advancedfailure theories such as Hashin and Puck theories. Furthermore, there is not enough practical commercial finite element analysis (FEA)code which is basically adopted the separate mode criteria. Hence, in the present study, the user-defined subroutine of commercialFEA code ABAQUS for evaluation of fiber and matrix failures of composite structures was developed based on Hashin and Puck failurecriteria. And then, the proposed subroutine was validated by comparing with a series of experimental results of carbon- andglass-implemented composite laminates to guarantee the reliability and usefulness of the developed method.
Abstract
In the present study, the fiber and matrix failure of composite laminates under arbitrary biaxial stresses were evaluated based onseparate mode criteria such as Hasnin and Puck theories. There is a limitation to predict the fiber-dominant and/or matrix-dominantfailures under arbitrary stress states using limit criteria (maximum stress and maximum strain theories) and interactive criteria (Tsai-Hilland Tsai-Wu theories). There is little literature for failure analysis of ships and offshore composite structures considering advancedfailure theories such as Hashin and Puck theories. Furthermore, there is not enough practical commercial finite element analysis (FEA)code which is basically adopted the separate mode criteria. Hence, in the present study, the user-defined subroutine of commercialFEA code ABAQUS for evaluation of fiber and matrix failures of composite structures was developed based on Hashin and Puck failurecriteria. And then, the proposed subroutine was validated by comparing with a series of experimental results of carbon- andglass-implemented composite laminates to guarantee the reliability and usefulness of the developed method.
참고문헌 (21)
- 김상국, "손상변수기반 점진적 파손이론을 이용한 복합재 이중 겹침 볼트 체결부의 강도 해석", Composites Research, 26(2), pp.91~98 (2013), 한국복합재료학회
- 박국진, "재료 비선형과 연속체 손상역학을 고려한 복합 적층판의 강도 예측", 한국항공우주학회지, 42(11), pp.927~936 (2014), 한국항공우주학회
- 손병직, "풍력 블레이드에서 정적 이축하중 부하에 따른 거동 분석", 대한기계학회논문집 A, 36(3), pp.297~304 (2012), 대한기계학회
- Lee, D.G., "Composite Materials" (2007), Hongrung Publishing
- Barbero, E. J., "Introduction to Composite Materials Design" (2011), CRC Press
- Barbero, E. J., "Finite Element Analysis of Composite Materials using Abaqus" (2013), CRC Press
- Germanischer Lloyd, "Guideline for the Certification of Wind Turbines" (2010), Germanischer Lloyd
- Hashin, Z., "Failure Criteria for Unidirectional Fiber Composites.", Journal of Applied Mechanics, 47(2), pp.329~334 (1980)
- Hinton, M.J., "Predicting Failure in Composite Laminates: The Background to the Exercise", Composites Science and Technology, 58, pp.1001~1010 (1998)
- Hinton, M.J., "A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates, Judged against Experimental Evidence", Composites Science and Technology, 62, pp.1725~1797 (2002)
- Hinton, M.J., "Failure Criteria in Fibre Reinforced Polymer Composites: The World-Wide Failure Exercise" (2004), Elsevier
- Kaddour, A.S., "A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates: Additional Contributions", Composites Science and Technology, 64, pp.449~476 (2004)
- 이상갑, "유연 복합재료 프로펠러 제작개선 및 성능분석", 대한조선학회 논문집, 49(6), pp.521~527 (2012), 대한조선학회
- Nahas, M. N., "Survey of Failure and Post-Failure Ttheories of Laminated Fiber-Reinforced Composites", Journal of Composites Technology & Research, 8(4), pp.138~153 (1986)
- Pavlou, D., "Composite Materials in Piping Applications: Design, Analysis and Optimization of Subsea and Onshore Pipelines from FRP Materials" (2013), DEStech Publications
- Puck, A., "Failure Analysis of FRP Laminates by Means of Physically based Phenomenological Models", Composites Science and Technology, 58(7), pp.1045~1067 (1998)
- Puck, A., "Failure Analysis of FRP Laminates by Means of Physically based Phenomenological Models", Composites Science and Technology, 62(12-13), pp.1633~1662 (2002)
- Puck, A., "Guidelines for the Determination of the Parameters in Puck’s Action Plane Strength Criterion", Composites Science and Technology, 62, pp.371~378 (2002)
- Soden, P.D., "Lamina Properties, Lay-Up Configurations and Loading Conditions for a Range of Fibre-Reinforced Composite Laminates", Composites Science and Technology, 58, pp.1011~1022 (1998)
- Soden, P.D., "A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates", Composites Science and Technology, 58, pp.1225~1254 (1998)
- Comparative evaluation of failure analysis methods for composite laminates, "Sun, C.T.", NASA, ~, pp.NASA, DOT (1996), FAA[DOI]