IMO Type B 탱크 상부 Rolling Chock에 대한 시간영역 피로해석
Time Domain Fatigue Analysis on the Upper Rolling Chock of IMO Type B Tank
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Present research target to develop the procedure of long-term fatigue analysis of the structural details near the upper rolling chock of IMO type B tank by using the time domain modal analysis technique where both the contact and friction behavior can be accurately simulated. In order to perform the time domain analysis focused on the contact and friction, the entire model of the hull and tank was condensed with DOF reduction technique, which is obtained by transforming the global finite element model into its quasi-static modal coordinate. Modal analysis using the quasi-static deformation modes is chosen as a cost effective time domain simulation method and this is based on the fact that the structural response of the tank is quasi-static. Based on the developed cost effective time domain simulation method, the long-term fatigue analysis procedure for the structural details near the rolling chock and key of independent type tank is targeted to be established. The developed fatigue assessment procedure takes into account, wave induced stress and both contact and friction induced stress without loss of accuracy.
Abstract
Present research target to develop the procedure of long-term fatigue analysis of the structural details near the upper rolling chock of IMO type B tank by using the time domain modal analysis technique where both the contact and friction behavior can be accurately simulated. In order to perform the time domain analysis focused on the contact and friction, the entire model of the hull and tank was condensed with DOF reduction technique, which is obtained by transforming the global finite element model into its quasi-static modal coordinate. Modal analysis using the quasi-static deformation modes is chosen as a cost effective time domain simulation method and this is based on the fact that the structural response of the tank is quasi-static. Based on the developed cost effective time domain simulation method, the long-term fatigue analysis procedure for the structural details near the rolling chock and key of independent type tank is targeted to be established. The developed fatigue assessment procedure takes into account, wave induced stress and both contact and friction induced stress without loss of accuracy.
참고문헌 (8)
- Andersson, S., "Friction Models for Sliding Dry, Boundary and Mixed Lubricated Contacts", Tribology, 40, pp.580~587 (2007)
- Blinman, P.A., "A system-theoretic approach of systems with hysteresis: application to friction modelling and compensation", Proceedings of the 2nd European control conference, pp.1844~1849 (1993)
- Blinman, P.A., "Easy-to-use realistic dry friction models for automatic control", Proceedings of 3rd European control conference, pp.3788~3794 (1995)
- Dahl, P., "Solid Friction Damping of Mechanical Vibrations", Journal of American Institute of Aeronautics and Astronautics, 14(12), pp.1675~1682 (1976)
- Dankowicz, H., "Modelling of Dynamic Friction Phenomena", Journal of Applied Mathematics and Mechanics, 79, pp.399~409 (1999)
- 이광용, "독립탱크 A형 LPG선 탱크 지지구조 해석을 위한 상대운동의 모델링에 관한 연구", 대한조선학회 논문집, 46(2), pp.148~154 (2009), 대한조선학회
- Olosson, H., "Friction Models and Friction Compensation", European Journal of Control, 4, pp.176~195 (1998)
- Park, J.S., "Fatigue strength assessment of a support structure of independent type tank considering contact", Proceedings of annual conference of SNAK, pp.407~412 (2012)