유탄성 응답을 고려한 초대형 광탄 운반선(VLOC)의 피로 손상 예측 기법에 관한 연구
Study of the Prediction of Fatigue Damage Considering the Hydro-elastic Response of a Very Large Ore Carrier (VLOC)
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Estimating fatigue damage is a very important issue in the design of ships. The springing and whipping response, which is the hydro-elastic response of the ship, can increase the fatigue damage of the ship. So, these phenomena should be considered in the design stage. However, the current studies on the the application of springing and whipping responses at the design stage are not sufficient. So, in this study, a prediction method was developed using fluid-structural interaction analysis to assess of the fatigue damage induced by springing and whipping. The stress transfer function (Stress RAO) was obtained by using the 3D FE model in the frequency domain, and the fatigue damage, including linear springing, was estimated by using the wide band damage model. We also used the 1D beam model to develop a method to estimate the fatigue damage, including nonlinear springing and whipping by the vertical bending moment in the short-term sea state. This method can be applied to structural members where fatigue strength is weak to vertical bending moments, such as longitudinal stiffeners. The methodology we developed was applied to 325K VLOC, and we analyzed the effect of the springing and whipping phenomena on the existing design.
Abstract
Estimating fatigue damage is a very important issue in the design of ships. The springing and whipping response, which is the hydro-elastic response of the ship, can increase the fatigue damage of the ship. So, these phenomena should be considered in the design stage. However, the current studies on the the application of springing and whipping responses at the design stage are not sufficient. So, in this study, a prediction method was developed using fluid-structural interaction analysis to assess of the fatigue damage induced by springing and whipping. The stress transfer function (Stress RAO) was obtained by using the 3D FE model in the frequency domain, and the fatigue damage, including linear springing, was estimated by using the wide band damage model. We also used the 1D beam model to develop a method to estimate the fatigue damage, including nonlinear springing and whipping by the vertical bending moment in the short-term sea state. This method can be applied to structural members where fatigue strength is weak to vertical bending moments, such as longitudinal stiffeners. The methodology we developed was applied to 325K VLOC, and we analyzed the effect of the springing and whipping phenomena on the existing design.
참고문헌 (14)
- Benasciutti, D., "Spectral Methods for Lifetime Prediction under Wide-band Stationary Random Processes", International Journal of Fatigue, 27(8), pp.867~877 (2005)[DOI]
- Bishop, R. E. D., "A Note on the Dynamical Behavior of Uniform Beams Having Open Channel Section", Journal of Sound and Vibration, 99(2), pp.155~167 (1985)[DOI]
- 정준모, "광대역 정규 프로세스에 대한 주파수 영역 기반 피로해석법의 적용성에 관한 연구 II : 광대역 피로예측 모델", 대한조선학회 논문집, 49(4), pp.359~366 (2012), 대한조선학회[DOI]
- Khabakhpasheva, T. I., "Generalized Wagner Model of Water Impact by Numerical Conformal Mapping", Applied Ocean Research, 44, pp.29~38 (2014)[DOI]
- 김병훈, "대형 컨테이너 선박의 유탄성 실선 계측 데이터 분석 PartⅠ- 모달 파라미터 추정", 대한조선학회 논문집, 55(1), pp.37~44 (2018), 대한조선학회[DOI]
- 김경환, "3차원 경계요소법과 전선 유한요소 해석의 연성을 통한 전선 유탄성 해석", 대한조선학회 논문집, 49(4), pp.312~326 (2012), 대한조선학회[DOI]
- Kim, J. H., "Numerical Analysis on Springing and Whipping using Fully-coupled FSI Models", Ocean Engineering, 91, pp.28~50 (2014)[DOI]
- WISH-FLEX : Development of Prediction Method for Ship Structural Hydro-elasticity in Waves(Springing and Slamming-Whipping), "Kim, Y. H.", Seoul National University, ~ (2011)
- Kim, Y. I., "Analysis of Hydroelasticity of Floating Ship-like Structure in Time Domain using a Fully Coupled Hybrid BEM-FEM", Journal of Ship Research, 53(1), pp.31~47 (2009)
- Malenica, S., "Some Aspects of Hydroelastic Issue in the Design of Ultra Large Container Ships", Proceedings of 22nd International Workshop on Water Waves and Floating Bodies, pp.133~136 (2007)
- 박준범, "광대역 이봉형 응력 범위 스펙트럼에 대한 주파수 영역 피로 손상 평가 모델에 대한 연구", 대한조선학회 논문집, 48(4), pp.299~307 (2011), 대한조선학회
- Remy, F., "Experimental and Numerical Study of the Wave Response of a Flexible Barge", Proceedingds of Fourth International Conference on Hydroelasticity in Marine Technology, pp.255~264 (2006)
- Storhaug, S., "First Ocean Going Ships with Springing and Whipping Included in the Ship Design", Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Artic Engineering, pp.281~292 (2011)
- Senjanovic, I., "An Advanced Theory of Thin-walled Girders with Application to Ship Vibrations", Marine Structure, 22(3), pp.387~437 (2009)[DOI]