축 처짐과 선미관 저널 베어링 유막 압력의 상호작용을 고려한 추진축계 정렬 해석
Propulsion Shafting Alignment Analysis Considering the Interaction between Shaft Deflection and Oil Film Pressure of Sterntube Journal Bearing
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Precise propulsion shafting alignment of ships is very important to prevent damage of its support bearings due to excessive reaction forces caused by hull deflection, forces acted on propeller and crankshaft, and so forth. In this paper, a new iterative shafting alignment calculation procedure considering the interaction between shaft deflection and oil film pressure of Sterntube Journal Bearing (SJB) bush with single or multiple slopes is proposed. The procedure is based on a pressure analysis to evaluate distributed equivalent support stiffness of SJB by solving Reynolds equation and a deflection analysis of shafting system by a finite element method based on Timoshenko beam theory. SJB is approximated with multi-point biaxial elastic supports equally distributed to its length. Their initial stiffness values are estimated from dynamic reaction force calculated by assuming SJB as single rigid support. Then, the shaft deflection and the support stiffness of SJB are sequentially and iteratively calculated by applying a criteria on deflection variation between sequential calculation results. To demonstrate validity and applicability of the proposed procedure for optimal slope design of SJB, numerical analysis results for a shafting system are described.
Abstract
Precise propulsion shafting alignment of ships is very important to prevent damage of its support bearings due to excessive reaction forces caused by hull deflection, forces acted on propeller and crankshaft, and so forth. In this paper, a new iterative shafting alignment calculation procedure considering the interaction between shaft deflection and oil film pressure of Sterntube Journal Bearing (SJB) bush with single or multiple slopes is proposed. The procedure is based on a pressure analysis to evaluate distributed equivalent support stiffness of SJB by solving Reynolds equation and a deflection analysis of shafting system by a finite element method based on Timoshenko beam theory. SJB is approximated with multi-point biaxial elastic supports equally distributed to its length. Their initial stiffness values are estimated from dynamic reaction force calculated by assuming SJB as single rigid support. Then, the shaft deflection and the support stiffness of SJB are sequentially and iteratively calculated by applying a criteria on deflection variation between sequential calculation results. To demonstrate validity and applicability of the proposed procedure for optimal slope design of SJB, numerical analysis results for a shafting system are described.
참고문헌 (18)
- American Bureau of Shipping, "Guidance Notes on Propulsion Shafting Alignment", ABS, ~ (2014)
- Evaluation of Propeller Shafting Considering Hull Deflection, "Cho, D.S.", GCRC-SOP, ~, pp.Report No. 2015-15-02 (2015)
- 정준모, "선체변형을 고려한 탄성 축계정렬 설계 프로그램 개발", 대한조선학회 논문집, 43(4), pp.512~520 (2006), 대한조선학회
- 정준모, "탄성 변형된 저어널의 편심과 베어링 부시의 부분경사를 고려한 선미관 후부 베어링의 압력분포 해석", 대한조선학회 논문집, 44(6), pp.666~674 (2007), 대한조선학회
- 정준모, "비선형 탄성 다점지지 베어링 요소를 이용한 선미관 베어링의 유효지지점 검증", 대한조선학회 논문집, 42(5), pp.479~486 (2005), 대한조선학회
- 정준모, "비선형 베어링 요소를 이용한 탄성 추진 축계정렬에 관한 고찰", 대한조선학회 논문집, 42(3), pp.259~267 (2005), 대한조선학회
- Det Norske Veritas, "Nauticus Shaft Alignment – User Manual. Ver.11", DNV, ~ (2012)
- Hamlock, "Fundamental of Fluid Film Lubrication" (1994), McGraw-Hill
- MSC, "MD Nastran 2010 User’s Guide", MSC Software, ~ (2010)
- Nippon Kaiji Kyokai, "Guidelines on Shafting Alignment", NK, ~ (2006)
- Press, W. H., "Numerical Recipes – The Art of Scientific Computing" (1986), Cambridge University Press
- Ryu, S. H., "Calculation of Shaft Alignment, STX DWG No. T6042000" (2000), STX Offshore & Shipbuilding
- Shaft Analysis AB, "Software for Marin Propulsion" (2001), Shaft Analysis AB
- 신상훈, "선박의 직진과 선회 시의 프로펠러 하중이 프로펠러 축 베어링에 미치는 영향", 대한조선학회 논문집, 52(1), pp.61~69 (2015), 대한조선학회
- 신상훈, "선박 추진축 선미 베어링 압력 분포 해석", 대한조선학회 논문집, 41(3), pp.35~40 (2004), 대한조선학회
- Stachowiak, G., "Engineering Tribology" (2005), Butterworth-Heinemann
- 선진석, "선체 변형 근사곡선을 이용한 추진축계 정렬의 유연성 평가", 한국마린엔지니어링학회지, 33(1), pp.28~36 (2009), 한국마린엔지니어링학회
- Vartdal, B. J., "Lateral propeller forces and their effects on shaft bearings", First International Symposium on Marine Propulsors, pp.475~481 (2009)