단파장 영역에서 운항 자세가 KCS의 선체 저항에 미치는 영향
Effects of Trim Conditions on Ship Resistance of KCS in Short Waves
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Numerical simulations of turbulent two phase flows around KCS have been performed to investigate effects of trim conditions on ship resistance of KCS in short waves by utilizing waves2foam. The wave lengths of LPP/2 and LPP/4 with 1m and 2m wave heights were imposed at inlet boundary. The resistance reduction at 2m trim by head and the increase of resistance at trims by stern were observed regardless of wave lengths and wave heights. The hull pressure on fore-and-aft rather than wave patterns around bulbous bows was mainly responsible for the total resistance coefficients of KCS in short waves. A phase diagram of contribution of hull pressure to the total resistance coefficients disclosed that the phase of representing the maximum resistance in time history played an important role in the effect of trim conditions on ship resistance of KCS in short waves.
Abstract
Numerical simulations of turbulent two phase flows around KCS have been performed to investigate effects of trim conditions on ship resistance of KCS in short waves by utilizing waves2foam. The wave lengths of LPP/2 and LPP/4 with 1m and 2m wave heights were imposed at inlet boundary. The resistance reduction at 2m trim by head and the increase of resistance at trims by stern were observed regardless of wave lengths and wave heights. The hull pressure on fore-and-aft rather than wave patterns around bulbous bows was mainly responsible for the total resistance coefficients of KCS in short waves. A phase diagram of contribution of hull pressure to the total resistance coefficients disclosed that the phase of representing the maximum resistance in time history played an important role in the effect of trim conditions on ship resistance of KCS in short waves.
참고문헌 (15)
- Afshar, M. A., "Numerical wave generation in OpenFOAMⓇ", Master, pp.2010
- Apsley, D., "CFD simulation of twoand three-dimensional free-surface flow", International Journal for Numerical Methods in Fluids, 42, pp.465~491 (2003)
- Bruinsma, N., "Validation and application of a fully nonlinear numerical wave tank", Master, pp.2016
- Guo, B.J, "Evaluation of added resistance of KVLCC2 in short waves", Journal of Hydrodynamics, 23(6), pp.709~722 (2011)
- Jacobsen, N.G, "A wave generation toolbox for the open-source CFD library: OpenFoamⓇ", International Journal for Numerical Methods in Fluids, 70, pp.1073~1088 (2012)
- Uncertainty analysis for the KCS model (SRI M.S. No. 631) tests in the SRI 400m towing tank, "Kume, K.", Ship Performance Division, The Ship Research Institute, The Ministry of Transport, ~, pp.SPD Report No. 00-008-1 (2000)
- Mayer, S, "A fractional step method for unsteady free-surface flow with applications to non-linear wave dynamics", International Journal for Numerical Methods in Fluids, 28(2), pp.293~315 (1988)
- 이상봉, "선체 저항에 대한 수치 해석의 통계적 신뢰도 분석", 대한조선학회 논문집, 51(4), pp.321~327 (2014), 대한조선학회
- 박동민, "선박의 파랑 중 부가저항에 대한 실험과 수치계산의 비교 연구", 대한조선학회 논문집, 51(6), pp.459~479 (2014), 대한조선학회
- 박동우, "선박의 트림 자세가 저항 성능에 미치는 영향", 대한조선학회 논문집, 50(2), pp.88~94 (2013), 대한조선학회
- 서광철, ""Inclined Keel" 컨테이너선의 조파저항 최소화를 위한 선형최적화", 대한조선학회 논문집, 46(2), pp.97~104 (2009), 대한조선학회
- Seo, M.-G, "Numerical analysis of added resistance on ships in short waves", Ocean Engineering, 87, pp.97~110 (2014)
- Van, S.H, "Experimental investigation of the flow characteristics around practical hull forms", Proc. of the 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design, pp.215~227 (1998)
- 양지만, "대형유조선의 경사상태에서의 저항추진 성능추정", 대한조선학회 논문집, 42(4), pp.307~314 (2005), 대한조선학회
- 양경규, "단파장 영역에서의 부가저항 해석", 대한조선학회 논문집, 52(4), pp.338~348 (2015), 대한조선학회