일반화된 Hoek-Brown 파괴조건식에 내포된 전단강도 근사식
Approximate Shear Strength Formula Implied in the Generalized Hoek-Brown Failure Criterion
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
일반화된 Hoek-Brown (GHB) 파괴조건식은 최근 각종 암반공학적 계산에 활발히 이용되고 있지만Mohr 파괴포락선이 해석적 수식으로 표시되지 않아 적용범위를 넓히는데 어려움이 있다. 이러한 단점을 극복하기 위해 이 연구에서는 GHB 파괴함수에 내포된 수직응력 - 접선마찰각 관계식을 다항식으로최적 근사시켜 접선마찰각을 수직응력의 명시적 근사함수로 표시하는 새로운 방법을 제안하였다. 이 수직응력 - 접선마찰각 관계식을 직선 또는 2차 다항식으로 최적 근사시킬 경우 접선마찰각에 대한 해석적해가 존재한다. 이 해를 전단응력 - 접선마찰각 관계식에 대입하면 GHB 파괴함수의 근사적 Mohr 파괴포락선을 유도하는 것이 가능하다. 유도한 근사 Mohr 파괴포락선은 GSI 값 전체 범위에서 정해와 매우근사함이 입증되었다.
Abstract
Recently, the generalized Hoek-Brown (GHB) failure criterion has been actively employed in various rock engineering calculations, but the analytical form of the corresponding Mohr failure envelope is not available, making it difficult to extend the application of the GHB criterion. In order to overcome this disadvantage, this study proposes a new method to express the tangential friction angle as an explicit function of normal stress by invoking the polynomial best-fitting to the relationship between normal stress and tangent friction angle implied in the GHB failure function. If this normal stress - tangential friction angle relationship is best-fitted with linear or quadratic polynomial function, it is possible to find the analytical root for tangential friction angle. Subsequently, incorporating the root into the relationship between shear stress and tangential friction angle accomplishes the derivation of the approximate Mohr envelope for the GHB criterion. It is demonstrated that the derived approximate Mohr failure envelopes are very accurate in the entire range of GSI value.
참고문헌 (27)
- Al-Ajmi, A.M., "Relation between the Mogi and the Coulomb failure criteria", Int. J. Rock Mech. Min. Sci., 42, pp.431~439 (2005)
- Alejano, L.R., "Drucker-Prager criterion", Rock Mech. Rock Eng., 45, pp.995~999 (2012)
- Balmer, G., "A general analytical solution for Mohr’s envelope", Proc. ASTM, 52, pp.1260~1271 (1952)
- Benz, T, "A Hoek-Brown criterion with intrinsic material strength factorization", Int. J. Rock Mech. Min. Sci., 45(2), pp.210~222 (2008)
- Bretscher, O., "Linear algebra with applications" (2005), Pearson Prentice Hall
- Chen, W. -F., "Limit analysis and soil plasticity" (2008), J.Ross Publishing Inc.
- Clausen, J., "An exact implementation of the Hoek-Brown criterion for elasto-plastic finite element calculations", Int. J. Rock Mech. Min. Sci., 45, pp.831~847 (2008)
- Ewy, R., "Wellbore-stability predictions by use of a modified Lade criterion", SPE Drill Completion, 14(2), pp.85~91 (1999)
- Hoek, E., "Strength of jointed rock masses", Geotechnique, 33, pp.187~223 (1983)
- Hoek, E., "Hoek-Brown failure criterion - 2002 Edition", Proc. NARM-TAC Conf., 1, pp.267~273 (2002)
- Hoek, E., "Putting numbers to geology-an engineer’s viewpoint", Quat. J. Eng. Geol., 32, pp.1~19 (1999)
- 이연규, "중간주응력을 고려한 선형 및 비선형 암석파괴조건식의 비교 고찰", 터널과 지하공간, 22(1), pp.12~21 (2012), 한국암반공학회
- 이연규, "응력무차원화 변환을 이용한 Hoek-Brown 파괴함수의 Mohr 파괴포락선 유도", 터널과 지하공간, 24(1), pp.81~88 (2014), 한국암반공학회
- Lee, Y. -K., "Analytical representation of Mohr envelope approximating the generalized Hoek-Brown failure criterion", Int. J. Rock Mech. Min. Sci., 100, pp.90~99 (2017)
- Lee, Y. -K., "Approximation of Mohr envelope for the generalized Hoek-Brown criterion", Book of Extended Abstract for 4th Int. Sympo. on Comput. Geomech. (2018)
- Lee, Y.-K., "Limit equilibrium analysis incorporating the generalized Hoek-Brown criterion", Rock Mech. Rock Eng (2018)
- Lee, Y.-K., "Failure criteria for rocks based on smooth approximations to Mohr-Coulomb and Heok-Brown failure functions", Int. J. Rock Mech. Min. Sci., 56, pp.146~160 (2012)
- Londe, P., "Discussion on the determination of the shear stress failure in rock masses", ASCE J. Geotech. Eng. Div., 14(3), pp.374~376 (1988)
- Mao, N., "Probabilistic analysis and design of strip foundation resting on rocks obeying Hoek-Brown failure criterion", Int. J. Rock Mech. Min. Sci., 49, pp.45~58 (2012)
- Merifield, R.S., "Limit analysis solutions for the bearing capacity of rock masses using the generalized Hoek-Brown criterion", Int. J. Rock Mech. Min. Sci., 43, pp.920~937 (2006)
- Obert, L., "Rock mechanics and the design of structures in rock" (1967), John Wiley & Sons, Inc.
- Rojat, F., "Improved analytical solutions for the response of underground excavations in rock mass satisfying the generalized Hoek-Brown failure criterion", Int. J. Rock Mech. Min. Sci., 79, pp.193~204 (2015)
- Ucar, R., "Determination of shear failure envelope in rock masses", J. Geotech. Eng. Div. ASCE, 112(3), pp.303~315 (1986)
- Ulusay, R., "The ISRM suggested methods for rock characterization, testing and monitoring: 2007-2014" (2014), Springer
- Wyllie, D.C., "Rock Slope Engineering" (2004), Spon Press
- Yang, X.L., "Collapse mechanism of shallow tunnel based on Hoek-Brown failure criterion", Tunnel. Underg. Space Tech., 26, pp.686~691 (2011)
- Zhou, S., "A program to model the initial shape and extend of borehole breakout", Comput. Geosci., 20, pp.1143~1160 (1994)