층류-난류 천이 모델을 적용한 프로펠러 단독 성능 해석에 관한 CFD 시뮬레이션
CFD Simulation on Predicting POW Performance Adopting Laminar-Turbulent Transient Model
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In the present study, the model-scale Propeller Open Water (POW) tests for the propeller of 176K bulk carrier and 8600TEU container ship were conducted through Computational Fluid Dynamics (CFD) simulation. In order to solve the incompressible viscous flow field, the Reynolds-averaged Navier-Stokes (RaNS) equations were employed as the governing equations. The γ-Reθ(gamma-Re-theta) transition model combined with the SST k-ωturbulence model was introduced to describe the laminar-turbulence transition considering the low Reynolds number of model-scale. Firstly, the flow simulation developing over a flat plate was performed to verify the transition modeling, in which the wall shear stresses were compared with experiments and other numerical results. Then, to investigate the effect of the model, the CFD simulation for the POW test was performed and the simulated propeller performance was validated through comparison with the experiment conducted at Korea Research Institute of Ships & Ocean Engineering (KRISO).
Abstract
In the present study, the model-scale Propeller Open Water (POW) tests for the propeller of 176K bulk carrier and 8600TEU container ship were conducted through Computational Fluid Dynamics (CFD) simulation. In order to solve the incompressible viscous flow field, the Reynolds-averaged Navier-Stokes (RaNS) equations were employed as the governing equations. The γ-Reθ(gamma-Re-theta) transition model combined with the SST k-ωturbulence model was introduced to describe the laminar-turbulence transition considering the low Reynolds number of model-scale. Firstly, the flow simulation developing over a flat plate was performed to verify the transition modeling, in which the wall shear stresses were compared with experiments and other numerical results. Then, to investigate the effect of the model, the CFD simulation for the POW test was performed and the simulated propeller performance was validated through comparison with the experiment conducted at Korea Research Institute of Ships & Ocean Engineering (KRISO).
참고문헌 (23)
- Abu-Ghannam, B.J, "Natural transition of boundary layers-the effects of turbulence, pressure gradient, and flow history", Journal of Mechanical Engineering Science, 22(5), pp.213~228 (1980)
- Baltazar, J, "On the use of the γ-Reθt transition model for the prediction of the propeller performance at model-scale", Ocean Engineering, 170, pp.6~19 (2018)
- Bhattacharyya, A, "Scale effects on open water characteristics of a controllable pitch propeller working within different duct designs", Ocean Engineering, 112, pp.226~242 (2016)
- Castelli, E.B, "Numerical analysis of laminar to turbulent transition on the DU91-W2-250 airfoil" (2012), World Academy of Science, Engineering and Technology
- Coupland, J, ". Special interest group on laminar to turbulent transition and retransition: T3A and T3B test cases" (1990), European Research Community On Flow, Turbulence And Combustion TR A
- ITTC, "Final report of the propulsor committee", Proceedings of the 20th ITTC (1993)
- Janssen, R.F, "The influence of laminar-turbulent transition on the perfomance of a propeller" (2015), TU Delft University
- 정태환, "세가지 다른 모형의 덕트 프로펠러의 CFD 해석과 시험에 관한 연구", 한국해양공학회지, 28(3), pp.199~208 (2014), 한국해양공학회
- Juhaveikko, A.J, "CFD simulations of a turbulent flow over flat plate" (2001), Aalto University
- Kuiper, G, "Cavitation inception on ship propeller models" (1981), Netherlands Ship Model Basin
- Langtry, R.B, "Correlation-based transition modeling for unstructured parallelized computational fluid dynamics codes", AIAA journal, 47(12), pp.2894~2906 (2009)
- 이상봉, "초저속 영역에서 난류 촉진기 주위 천이 유동의 직접수치 및 대형 와 모사", 대한조선학회 논문집, 55(3), pp.265~273 (2018), 대한조선학회[DOI]
- Menter, F. R, "A correlation-based transition model using local variables-part I: model formulation", Journal of turbomachinery, 128(3), pp.413~422 (2006)
- Sasajima, T, "14th ITTC, Contribution to Performance Committee" (1975)
- 서성욱, "선수 규칙파 중 KCS의 부가저항 및 운동성능 수치해석", 대한조선학회 논문집, 54(2), pp.132~142 (2017), 대한조선학회[DOI]
- Jun Seok, "Numerical simulation of resistance performance according to surface roughness in container ships", International Journal of Naval Architecture and Ocean Engineering, 12, pp.11~19 (2020), 대한조선학회[DOI]
- 서성부, "CFD를 이용한 KRISO 추진효율 향상 장치(K-duct)의 성능 해석", 한국해양공학회지, 31(3), pp.183~188 (2017), 한국해양공학회[DOI]
- Tsuda, T, "Effect of propeller Reynolds number on self-propulsion performance", Japan Society of Naval Architects and Ocean Engineering, pp.169~ (1978)
- Wang, C, "Prediction of turbulent transition in boundary layers using the turbulent potential mode", Journal of Turbulence, 3(1), pp.1~15 (2002)
- Wang, X, "Computational analysis of marine-propeller performance using transition-sensitive turbulence modeling", Journal of Fluids Engineering, 134(7), pp.071107~ (2012)
- White, F.M, "Fluid mechanics" (2003), McGraw-Hill
- 양해욱, "CFD를 이용한 모형선과 실선 스케일의 반류 비교", 대한조선학회 논문집, 47(2), pp.150~162 (2010), 대한조선학회
- Zhang Yongxing, "Optimization Approach for a Catamaran Hull Using CAESES and STAR-CCM+", 한국해양공학회지, 34(4), pp.272~276 (2020), 한국해양공학회[DOI]