부분 침수 조건에서 작동하는 프로펠러의 공기유입과 축계 기진력에 대한 실험적 연구
Experimental Study on Ventilation and Shaft Excitation Force of a Propeller in Partially Submerged Condition
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Through a series of bollard pull tests of a propeller in partially submerged condition, thrust, torque, and shaft excitation force of a conventional propeller model were measured using a six-component load cell. By variation of the Weber number and Reynolds number, a consistent towing tank model test condition was derived. The effects of propeller immersion depth on the ventilation behavior and change of force and moment acting onto the propeller shaft were investigated. The decrease in thrust owing to the inception of ventilation was confirmed, and a large degree of dispersion of the thrust and torque coefficients were also observed in the transition region where the blade tip was under the water surface. The shaft excitation force was derived from the force and moment onto the propeller shaft.
Abstract
Through a series of bollard pull tests of a propeller in partially submerged condition, thrust, torque, and shaft excitation force of a conventional propeller model were measured using a six-component load cell. By variation of the Weber number and Reynolds number, a consistent towing tank model test condition was derived. The effects of propeller immersion depth on the ventilation behavior and change of force and moment acting onto the propeller shaft were investigated. The decrease in thrust owing to the inception of ventilation was confirmed, and a large degree of dispersion of the thrust and torque coefficients were also observed in the transition region where the blade tip was under the water surface. The shaft excitation force was derived from the force and moment onto the propeller shaft.
참고문헌 (25)
- ureau of Shipping (ABS), "Guide for enhanced shaft alignment" (2018), ABS
- ini, H, "Experimental and theoretical analysis of propeller shaft loads in oblique inflow", Journal of Ship Research, 55(4), pp.68~288 (2011)
- alifano, A., "Identification of ventilation regimes of a marine propeller by means of dynamic-loads analysis", Ocean Engineering, 38(14-15), pp.1600~1610 (2011)
- Denny, D. F, "An experimental study of air-entraining vortices in pump sumps", Proceedings of the Institution of Mechanical Engineers, 170(1), pp.106~125 (1956)
- International Towing Tank Conference (ITTC), "ITTC-Recommended Procedures and Guidelines, 7.5-02-03-02.1" (2008), ITTC
- ternational Towing Tank Conference (ITTC), "ITTC-Recommended Procedures and Guidelines, 7.5-02-03-02.1" (2014), ITTC
- Kempf, G, "The influence of viscosity on thrust and torque of a propeller working near the surface", Transactions of the Institution of Naval Architects, 76, pp.321~326 (1934)
- 김지혜, "유체-구조 연성 효과를 고려한 복합소재 유연 프로펠러의 설계", 대한조선학회 논문집, 57(2), pp.61~69 (2020), 대한조선학회[DOI]
- Koushan, K, "Dynamics of ventilated propeller blade loading on thrusters", Proceedings of the World Maritime Technology Conference (WMTC’06) (2006)
- Koushan, K, "Dynamics of propeller blade and duct loading on ventilated thrusters in dynamic positioning mode", Proceedings of the Dynamic Positioning Conference (2007)
- Koushan, K, "Ventilated propeller blade loadings and spindle moment of a thruster in calm water and waves", Proceedings of the Second International Symposium on Marine Propulsors (SMP’11) (2011)
- Kozlowska, A.M, "Classification of different type of propeller ventilation and ventilation inception mechanism", Proceedings of the 1st International Symposium on Marine Propulsors (SMP’09) (2009)
- Kozlowska, A.M, "Numerical and experimental study of propeller ventilation", Proceedings of the 2nd International Symposium on Marine Propulsors (SMP’11), (2011)
- Lee, S, "URANS simulation of a partially submerged propeller operating under the bollard condition", Brodogradnja: Teorija i praksa brodogradnje i pomorske tehnike, 69(1), pp.107~121 (2018)
- Leontopoulos, C, "Shaft alignment challenges – The single sterntube bearing design", Proceedings of the 6th technical meeting, American Bureau of Shipping (2016)
- Minsaas, K.J, "Scale effects on propulsion factors. Proceedings of the 14th International Towing Tank Conferences", Proceedings Volume 3 (1975)
- Molland, A, "Report of the propulsion committee", proceedings, 24th International Towing Tank Conference (ITTC), 1 (2005)
- Ortolani, F, "Experimental and numerical investigation of propeller loads in off-design conditions", Journal of Marine Science and Engineering, 6(2) (2018)
- Paik, B.G, "Effect of propeller immersion depth on the flow around a marine propeller", Journal of Ship Research, 52(2), pp.102~113 (2008)
- 백광준, "Numerical study on the hydrodynamic characteristics of a propeller operating beneath a free surface", International Journal of Naval Architecture and Ocean Engineering, 9(6), pp.655~667 (2017), 대한조선학회
- 이신형, "추진기 날개 끝 형상변화에 따른 보오텍스 유동에 대한 수치해석", 대한조선학회 논문집, 48(6), pp.501~508 (2011), 대한조선학회
- Rijpkema, D, "Numerical simulation of propeller-hull interaction and determination of the effective wake field using a hybrid RANS-BEM approac", Proceedings of the 3rd International Symposium on Marine Propulsors (SMP’13) (2013)
- Shiba, H, "Air-drawing of marine propellers", Report of Transportation Technical Research Institute, 9, pp.1~320 (1953)
- Seo, "Influence of design parameter variations for propeller-boss-cap-fins on hub vortex reduction", Journal of Ship Research, 60(4), pp.203~218 (2016)
- Vartdal, B.J, "Lateral propeller forces and their effects on shaft bearings", st International Symposium on Marine Propulsors (SMP’09) (2009)