국외 사례를 통한 사용후핵연료 심층처분시스템 완충재 및 뒤채움재의 현장시공 및 포화도 관리 기술 분석
Review of In-situ Installation of Buffer and Backfill and Their Water Saturation Management for a Deep Geological Disposal System of Spent Nuclear Fuel
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
완충재 및 뒤채움재는 심지층처분시스템 공학적방벽 구성요소로 고준위방사성폐기물을 안전하게 격리하고 폐기물로부터 유출되는 방사성핵종의 누출을 지연시키는 데 필수적인 역할을 한다. 완충재 및 뒤채움재로는 팽윤특성을 보이는 벤토나이트 혼합물의 사용이 고려되고 있으며 주변 암반으로부터 과도한지하수의 유입은 이러한 공학적방벽의 안정성과 효율성을 저하시킬 수 있다. 따라서, 심층처분장의 안전성 확보를 위해서는 완충재 및 뒤채움재의 엄격한 품질기준 및 현장관리 방안수립과 유입 지하수를 처리할 수 있는 기술이 요구된다. 본 고에서는 다양한 실험실 시험뿐만 아니라 스웨덴 Äspö Hard Rock Laboratory에서 수행된 처분터널 1/2 규모의 Steel Tunnel Test 사례를 심층 분석하여 완충재 및 뒤재움재의 설계 요구사항을 파악하고 현장실험 사례를 통해 파악된 품질관리 요소 및 방안을 소개하였다. 또한, 완충재 및 뒤채움재의 현장시공 안정성과 효율성을 확보하기 위한 처분갱도에서의 유입 지하수 처리방법에 대해 소개하고 벤토나이트 펠렛 채움 내의 지하수 저장능력과 토목섬유(geotextile) 사용 효과에 대한 검증 결과를 소개하였다.
Abstract
Buffer and backfill play an essential role in isolating high-level radioactive waste and retard the migration of leaked radionuclides in deep geological disposal system. A bentonite mixture, which exhibits a swelling property, is considered for buffer and backfill materials, and excessive groundwater inflow from surrounding rock mass may affect stability and efficiency of their role as an engineered barrier. Therefore, stringent quality control as well as in-situ installation management and inflow water constrol for buffer and backfill are required to ensure the safety of deep disposal facilities. In this study, we analyzed the design requirements of buffer and backfill by examining various laboratory tests and a field study of the Steel Tunnel Test at the Äspö Hard Rock Laboratory in Sweden. We introduced how to control the quality of buffer and backfill construction in-field, and also presented how to handle excessive groundwater inflow into disposal caverns, validating the groundwater retention capacity of bentonite pellets and the effectiveness of geotexile use.
참고문헌 (31)
- Backfill Design 2012, "Autio, J.", Posiva Oy, ~, pp.Posiva 2012-15 (2012)
- Deposition tunnel backfill design for a KBS-3V repository, "Hansen, J.", Posiva Oy, ~, pp.Working Report 2009-129 (2009)
- Hydrological discrete fracture network modelling of groundwater flow under open repository conditions, "Hartley, L.", Posiva Oy, ~, pp.Posiva Working Report 2010-51 (2010)
- Hong, C.H, "Review of Erosion and Piping in Compacted Bentonite Buffers Considering Buffer-Rock Interactions and Deduction of Influencing Factors", Tunnel & Underground Space, 32(1), pp.30~58 (2022)
- H12 Project to Establish Technical Basis for HLW Disposal in Japan(Supporting Report 2), "JNC", Japan Nuclear Cycle Development Institute, ~, pp.JNC TN1400 99-020 (1999)
- Prototype Repository, Installation of buffer and canisters in section II, "Johannesson, L. E.", SKB, ~, pp.IPR-04-13 (2004)
- Calculation of open repository inflows for Forsmark, "Joyce, S.", Svensk Kärnbränslehantering AB, ~, pp.SKB R-13-21 (2013)
- Buffer Production Line 2012, Design, Production and Initial State of the Buffer, "Juvankoski, M", Posiva Oy, ~, pp.Posiva 2012-17 (2012)
- Buffer Design 2012, "Juvankoski, M.", Posiva Oy, ~, pp.Posiva 2012-14 (2012)
- BACEKO II, Flow-through, openfront and saturation tests of pre-compacted backfill blocks in a quarter-scale test tunnel, "Keski-Kuha, E.", Posiva Oy, ~, pp.Working Report 2012-41 (2012)
- Assessment of backfill design for KBS-3V repository, "Keto, P.", Svensk Kärnbränslehantering AB, ~, pp.SKB R-09-52 (2009)
- Backfill production line 2012, Design, production and initial state of the deposition tunnel backfill and plug, "Keto, P.", Posiva Oy, ~, pp.Posiva 2012-18 (2012)
- System design of backfill. Distribution of inflowing water by using geotextiles, "Koskinen, V.", SKB, ~, pp.SKB R-14-10 (2014)
- Ku, H., "Analysis on Design Change for Backfilling Solution of the Disposal Tunnel in the Deep Geological Repository for High-Level Radioactive Waste in Finland", Tunnel & Underground Space, 33(6), pp.435~444 (2023)
- Park, J. H., "An Analysis of the Water Saturation Processes in the Engineered Barrier of a High Level Radioactive Waste Disposal System", J. of the Korean Radioactive Waste Society, 9(1), pp.23~32 (2011)
- Safety functions, performance targets and technical design requirements for a KBS-3V repository, "Posiva", Posiva SKB, ~, pp.Posiva SKB Report 01 (2017)
- Safety case for the disposal of spent nuclear fuel at Olkiluoto – Design basis 2012, "Posiva", Posiva Oy, ~, pp.Posiva 2012-03 (2012)
- Canister design 2012, "Raiko, H.", Posiva Oy, ~, pp.Posiva 2012-13 (2012)
- Flow-through and wetting tests of pre-compacted backfill blocks in a quarter-scale test tunnel, "Riikonen, E.", Posiva Oy, ~, pp.Eurajoki. Working Report 2008-89 (2008)
- Buffer Moisture Protection System, "Ritola, J.", Posiva Oy, ~, pp.Working Report 2012-05 (2012)
- Design of the Disposal Facility 2012, "Saanio, T.", Posiva Oy, ~, pp.Working Report 2013-17 (2013)
- Deep repository-engineered barrier system. Piping and erosion in tunnel backfill, "Sandén, T.", SKB, ~, pp.SKB R-06-72 (2008)
- System design of backfill, "Sandén, T.", SKB, ~, pp.SKB R-14-09 (2014)
- Pellet optimization – influence of fines. KBP1011 water handling during backfill installation, "Sandén, T.", SKB, ~, pp.SKB R-16-15 (2016)
- Water handling during backfilling, "Sandén, T.", Posiva SKB, ~, pp.Posiva SKB Report 05 (2017)
- The Disposal of Canada's Nuclear Fuel Waste: Engineering for a Disposal Facility, "Simmons, G. R.", Atomic Energy of Canada Limited, ~, pp.AECL-10715 (1994)
- Design premises for a KBS-3V repository based on results from the safety assessment SR-Can and some subsequent analyses, "SKB", SKB, ~, pp.SKB TR-09-22 (2009)
- Design, production and initial state of the backfill and plug in deposition tunnels, "SKB", SKB, ~, pp.SKB TR-10-16 (2010)
- RD&D Programme 2013, Programme for research, development and demonstration of methods for the management and disposal of nuclear waste, "SKB", Svensk Kärnbränslehantering AB, ~, pp.SKB TR-13-18 (2013)
- Aspö Hard Rock Laboratory annual report 2014, "SKB", Swedish Nuclear Fuel and Waste Management Company, ~, pp.TR-15-10 (2015)
- Backfilling of KBS-3V Deposition Tunnels – Possibilities and Limitations, "Wimelius, H.", Svensk Kärnbränslehantering AB, ~, pp.SKB R-08-59 (2008)