빙-선체 상호작용 시 모형선에 작용하는 빙하중 분포 특성 분석
An Analysis of Characteristic of Ice Load Distribution on Model Ship due to Ship and Ice Interaction
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Knowledge about ice load distribution along the ship hull due to ship–ice interaction can provide important background information for the development of design codes for ice-going vessels. The objective of this study is to understand ship and ice interaction phenomena and determine the magnitude of ice load acting along a ship hull. The model tests were performed in the ice model basin in Korea Research Institute of Ships and Ocean engineering (KRISO) with the model of icebreaking ship Araon. Self-propulsion tests in level ice were performed with three difference model ship speeds. In the model tests, three tactile sensors were installed to measure the spatial distribution of ice load acting at different locations on a model ship, such as the bow and shoulder areas. Variation in the distribution of ice load acting on a model hull with ship speed is discussed.
Abstract
Knowledge about ice load distribution along the ship hull due to ship–ice interaction can provide important background information for the development of design codes for ice-going vessels. The objective of this study is to understand ship and ice interaction phenomena and determine the magnitude of ice load acting along a ship hull. The model tests were performed in the ice model basin in Korea Research Institute of Ships and Ocean engineering (KRISO) with the model of icebreaking ship Araon. Self-propulsion tests in level ice were performed with three difference model ship speeds. In the model tests, three tactile sensors were installed to measure the spatial distribution of ice load acting at different locations on a model ship, such as the bow and shoulder areas. Variation in the distribution of ice load acting on a model hull with ship speed is discussed.
참고문헌 (8)
- Frederking, R., "Ice Pressure Variations during Indentation", Proceedings of the 17th International Association of Hydraulic Engineering and Research (IAHR), 2, pp.307~314 (2004)
- Izumiyama, K., "Ice Pressure acting over a Model Ship Hull", Proceedings of the 16th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC), pp.793~802 (2001)
- Jeong, S.Y., "Distribution of ice load acting on model hull due to ship–ice interaction", Proceedings of the 23rd International Conference on Port and Ocean Engineering under Arctic Conditions (POAC), pp.1~6 (2015)
- 이탁기, "북극해 계측자료에 기초한 아라온호의 국부 빙압력 계산 연구", 한국해양공학회지, 27(5), pp.88~92 (2013), 한국해양공학회
- Lu, W., "Rubble ice transport on arctic offshore structure (RITAS), part IV: tactile sensor measurement of the level ice load on inclined plate", Proceedings of the 22nd International Conference on Port and Ocean Engineering under Arctic Conditions (POAC), POAC13_087, pp.1~14 (2013)
- Lubbad, R., "A numerical model for real-time simulation of ship-ice interaction.", Cold Regions Science and Technology, 65, pp.11~127 (2011)
- Sodhi, D., "Measurement of ice forces and interfacial pressure during medium-scale indentation tests", Proceedings of the 16th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC), pp.617~626 (2001)
- Su, B., "A Numerical Method for the Prediction of Ship Performance in Level Ice", Cold Regions Science and Technology, 60, pp.177~188 (2010)