접촉식 센서를 이용한 고속 활주선 선미부 압력 계측 시험
Pressure Measurement of Planing Hull Stern Bottom by Tactile Sensors
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The running attitude of a planing hull is determined by the pressure distribution on the hull bottom, and it significantly affects hydrodynamic performance of the ship, i.e., resistance, maneuverability, and seakeeping ability. Therefore, it is essential to investigate pressure distribution on the hull bottom in order to improve hull design. In the present study, a novel pressure measurement system using tactile sensors was introduced for a planing hull. The test model was a 23 m-class planing hull with a hard chine. The pressure measurement showed that the pressure at the transom was lower than the atmospheric pressure, owing to flow separation at the transom.
Abstract
The running attitude of a planing hull is determined by the pressure distribution on the hull bottom, and it significantly affects hydrodynamic performance of the ship, i.e., resistance, maneuverability, and seakeeping ability. Therefore, it is essential to investigate pressure distribution on the hull bottom in order to improve hull design. In the present study, a novel pressure measurement system using tactile sensors was introduced for a planing hull. The test model was a 23 m-class planing hull with a hard chine. The pressure measurement showed that the pressure at the transom was lower than the atmospheric pressure, owing to flow separation at the transom.
참고문헌 (11)
- Allen, R.G., "A simplified method for determining structural design-limit pressures on high performance marine vehicles", Advanced Marine Vehicles Conference (1978)
- Dieck, R.H., "Test Uncertainty. ASME PTC 19.1-2005", American Society of Mechanical Engineers, ~ (2005)
- Garme, K., "In detail investigation of planing pressure", Proceedings of Hydralab III Joint Transnational Access User Meeting (2010)
- Grigoropoulos, G.J., "WIT Transactions on Modeling and simulation", pp.30~ (2001)
- Hydrodynamic pressure distributions obtained during a planing investigation of five related prismatic surfaces, "Kapryan, W.J.", NACA, ~, pp.NACA Technical Note No.3477 (1955)
- Kawata, T., "Velocity-pressure measurement based on planar PIV and miniature static pressure probes", Experiments in Fluids, 55(7) (2014)
- 김동진, "반배수량형 둥근빌지 고속선의 항주자세 및 동적안정성에 관한 연구", 박사, 산업·조선공학부, pp.2012
- Kim, Y.M., "System modeling and control of wire-driven high-speed towing carrage for uniform speed", Master, pp.2015
- Sanotoro, N., "Experimental study of the hydrodynamic loads on high speed planing craft", Procedia Engineering, 88, pp.186~193 (2014)[DOI]
- Savitsky, D., "Overview of planing hull developments", High Performance Marine Vehicle Conference and Exhibit (1992)
- Experimental with planing surfaces, "Sottorf, W.", NACA, ~, pp.NACA Technical Note No.739 (1934)