무인반잠수정의 진자식 횡동요 저감 장치 설계 및 감쇠계수 기반 검증
Design of a Pendulum-type Anti-rolling System for USSV and Verification Based on Roll Damping Coefficient
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The roll motion of a general vessel, which is more influenced by resonance as compared to other motions, adversely affects the passenger and hull. Therefore, reducing the roll motion through an anti-rolling system is critical, and most ships use various devices such as anti-rolling tanks, bilge keels, and fin stabilizers to accomplish this. In this study, a simplified model is developed for the application of an anti-rolling device for unmanned semi-submersible vessels. The applied anti-rolling device is installed on the stern and stem of a ship using a pair of servo motors with added weight, and the motor is controlled through the Arduino. The moment of the motor is designed and implemented based on a mathematical model such that it is calculated through the restoring force according to the heel angle of the ship. The performance of the proposed system was verified by utilizing the roll damping coefficient calculated by the free-roll decay test and logarithmic decrement method and was validated by a towing tank test. The system is expected to be used for unmanned vessels to perform sustainable missions.
Abstract
The roll motion of a general vessel, which is more influenced by resonance as compared to other motions, adversely affects the passenger and hull. Therefore, reducing the roll motion through an anti-rolling system is critical, and most ships use various devices such as anti-rolling tanks, bilge keels, and fin stabilizers to accomplish this. In this study, a simplified model is developed for the application of an anti-rolling device for unmanned semi-submersible vessels. The applied anti-rolling device is installed on the stern and stem of a ship using a pair of servo motors with added weight, and the motor is controlled through the Arduino. The moment of the motor is designed and implemented based on a mathematical model such that it is calculated through the restoring force according to the heel angle of the ship. The performance of the proposed system was verified by utilizing the roll damping coefficient calculated by the free-roll decay test and logarithmic decrement method and was validated by a towing tank test. The system is expected to be used for unmanned vessels to perform sustainable missions.
참고문헌 (19)
- Amerongen, J. van, "Rudder roll stabilization for ships", Automatica, 26(4), pp.679~690 (1990)
- Alarçin, F., "Rudder roll stabilization for fishing vessel using neural network approach", Ocean Engineering, 34(13), pp.1811~1817 (2007)
- Alujević, N., "Ship roll control and power absorption using a U-tube anti-roll tank", Ocean Engineering, 172, pp.857~870 (2019)
- Burger, W., "Ship Stabilizers: A Hand Book for Merchant Navy Officers" (1966), Pergamon
- 정태영, "250 TEU급 모바일하버를 위한 횡동요 저감 장치의 개념 설계 연구", 한국소음진동공학회논문집, 20(7), pp.629~636 (2010), 한국소음진동공학회
- InvenSense Inc, "MPU-9250 Product Specification", InvenSense Inc, ~ (2014)
- Jeong, M. J., "Simulation modeling and performance verification of motion characteristics for USSV’s SILS", Master’s, pp.2019
- Kim, J. H., "Development trends and industry status of unmanned ship technology", Korea Evaluation Institute of Industrial Technology, 15(3), pp.83~95 (2015)
- 김남우, "감쇠계수 산출을 위한 자유 횡동요 감쇠실험 연구", 대한조선학회 논문집, 52(6), pp.460~470 (2015), 대한조선학회
- Lee, K., "Software-In-the-loop based modeling and simulation of unmanned semi-submersible vehicle for performance verification of autonomous navigation", IOP Conference Series: Materials Science and Engineering, 280, pp.012042~ (2017)
- Lihua, L., "Simulation analysis of fin stabilizers on turning circle control during ship turns", Ocean Engineering, 173, pp.174~182 (2019)
- Wendi Liu, "Bilge keel design for the traditional fishing boats of Indonesia's East Java", International Journal of Naval Architecture and Ocean Engineering, 11(1), pp.380~395 (2019), 대한조선학회[DOI]
- 이광국, "무인반잠수정의 SILS를 위한 동특성 시뮬레이션 모델링 및 성능검증", 제어.로봇.시스템학회 논문지, 25(5), pp.388~397 (2019), 제어·로봇·시스템학회[DOI]
- Moon, S. J., "A sea-trial test of a pendulum-type mass driving anti-rolling system for small ships", Korean Society for Noise and Vibration Engineering(KSNVE), 2004, pp.438~441 (2004)
- Moon, S. J., "An experimental study on mass driving anti-rolling system for ships", Korean Society for Noise and Vibration Engineering(KSNVE), 2004, pp.727~730 (2004)
- 문석준, "가동질량을 이용한 선박용 횡동요 저감장치에 대한 실험적 연구", 대한조선학회 논문집, 42(6), pp.666~672 (2005), 대한조선학회
- (2011)[URL]
- Sharif, M., "Final experimental results of full scale fin", rudder roll stabilisation sea trials, 1996, pp.4(3), 377~384
- Shuzhe, C., "Modular modeling of autonomous underwater vehicle", OCEANS'11 MTS, 2011, ~