멤브레인 형 2차 방벽 이방성 복합재료의 섬유방향에 따른 기계적 성능 평가
Evaluation of Mechanical Performance of Membrane Type Secondary Barrier Anisotropic Composites depending on Fiber Direction
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Recently, the size of Liquified Natural Gas (LNG) carriers has been increasing, in turn increasing the load generated during operation. To handle this load, the thickness of LNG Cargo Containment Systems (CCSs) should be increased. Despite increasing the thickness of LNG CCSs, a secondary barrier is still used in conventional thickness. Therefore, the mechanical performance of the existing secondary barrier should be verified. In this study, tensile test of the secondary barrier was performed to evaluate mechanical properties under several low- and cryogenic-temperature conditions considering LNG environment, and in each fiber direction considering that the secondary barrier is composed of anisotropic composite materials depending on the glass fibers. Additionally, the coefficient of thermal expansion was measured by considering the degradation of the mechanical properties of the secondary barrier caused by the generated thermal stress during periodical unloading. As a result, the mechanical performance of secondary barrier in the Machine Direction (MD) was generally found to be superior than that in the Transverse Direction (TD) owing to the warp interlock structure of the glass fibers.
Abstract
Recently, the size of Liquified Natural Gas (LNG) carriers has been increasing, in turn increasing the load generated during operation. To handle this load, the thickness of LNG Cargo Containment Systems (CCSs) should be increased. Despite increasing the thickness of LNG CCSs, a secondary barrier is still used in conventional thickness. Therefore, the mechanical performance of the existing secondary barrier should be verified. In this study, tensile test of the secondary barrier was performed to evaluate mechanical properties under several low- and cryogenic-temperature conditions considering LNG environment, and in each fiber direction considering that the secondary barrier is composed of anisotropic composite materials depending on the glass fibers. Additionally, the coefficient of thermal expansion was measured by considering the degradation of the mechanical properties of the secondary barrier caused by the generated thermal stress during periodical unloading. As a result, the mechanical performance of secondary barrier in the Machine Direction (MD) was generally found to be superior than that in the Transverse Direction (TD) owing to the warp interlock structure of the glass fibers.
참고문헌 (15)
- Abtew, M. A., "Influences of fabric density on mechanical and moulding behaviours of 3D warp interlock para-aramid fabrics for soft body armour application", Composite Structures, 204, pp.402~418 (2018)
- Bai, R., "Shear deformation and energy absorption analysis of flexible fabric in yarn pullout test", Composites Part A : Applied Science and Manufacturing, 128, pp.105678~ (2020)
- Choi, I., "Cryogenic sandwich-type insulation board composed of E-glass", epoxy composite and polymeric foams, 2013, pp.102, 61~71
- Choi, S. W., "Analysis of two main LNG CCS(cargo containment system)insulation boxes for leakage safety using experimentally defined thermal properties", Applied Ocean Research, 37, pp.72~89 (2012)
- Dondi, G., "Crumb rubber in cold recycled bituminous mixes : comparison between traditional crumb rubber and cryogenic crumb rubber", Construction and Building Materials, 68, pp.370~375 (2014)
- Han, S., "Experimental study on the structural behavior of secondary barrier of Mark-III LNG CCS", ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering, pp.101~107 (2009)
- Ishimaru, J., "Building of advanced large sized membrane type LNG carrier", Mitsubishi Heavy Industries Technical Review, 41(6) (2004)
- Technical trends of LNG fueled ship and bunkering, "Kim, J. H.", Korea Evaluation Institute of Industrial Technology, ~ (2014)
- Kim, B. G., "Leakage characteristics of the glass fabric composite barriers of LNG ships", Composite structures, 86(1-3), pp.27~36 (2008)
- 김정범, "비선형 열팽창 특성을 고려한 이종 접합 복합재의 열변형 해석", 한국항공우주학회지, 42(10), pp.809~815 (2014), 한국항공우주학회
- Lee, D., "Adhesion characteristics of fiber-exposed glass composites", Composite Structures, 165, pp.9~14 (2017)
- Nam, S., "Fracture toughness improvement of polyurethane adhesive joints with chopped glass fibers at cryogenic temperatures", Composite Structures, 107, pp.522~527 (2014)
- Schinas, O., "Feasibility and commercial considerations of LNG-fueled ships", Ocean Engineering, 122, pp.84~96 (2016)
- Oh, D. J., "Reliability evaluation of a LNGC insulation system with a metallic secondary barrier", Composite Structures, 171, pp.43~52 (2017)
- Ristaniemi, A., "Comparison of elastic, viscoelastic and failure tensile material properties of knee ligaments and patellar tendon", Journal of biomechanics, 79, pp.31~38 (2018)