극저온 액화가스 화물창 2차방벽 구조 열 응력 취약 부 Prolonged 길이를 고려한 유리섬유 강화 복합재 기계적 물성 평가
Evaluation of Mechanical Performance Considering Prolonged Length of Glass Fiber-Reinforced Composite on Structure Weakness by Thermal Stress at Secondary Barrier in Cryogenic Liquified Gas Storage
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
멤브레인 형 LNG 화물창시스템(Cargo containment system, CCS) 내 유리섬유 강화 복합재료 기반 2차 방벽 설치 시 본딩 자동화 머신(automatic bonding machine, ABM) 활용한 prolonged 구조임과 동시에 양단 접착 고정 사이 비 접착(non-bonding, N-B) 영역의 복합재에서 극저온 열 수축 기인한 상당한 열 응력이 발생하기 때문에 이를 고려한 구조 안전성평가 관점에서 수행된 연구가 있으나 실제로 무한히 긴 길이 고려한 기계적 물성 평가를 수행한 연구는 찾아볼 수가 없었다. 해당 복합재는 파단강도 분산이 큰 세라믹 재료 취성 파괴임을 고려하여 2-파라미터 Weibull 통계분석을 통해 실제 길이 대상 신뢰도 있는 기계적 물성치 값을 표준화 하였으며 LNG 운반환경을 고려한 극저온 환경까지의 특정 온도별 단축 인장실험을 수행하였다. 실험결과, -70℃에서 기계적 강도가 -20℃에 비해 약 1.5배 급증하고 초기 권축 섬유 신장의 비선형 거동이 억제되었다. 또한, 극저온 환경까지 온도가 낮아질수록 기계적 강도는 계속해서 증가하였으나 반대로 연신은 줄어드는 저온 취성의 현상이 확인되었다. 본 연구에서 제시하는 기계적 물성치 데이터는 멤브레인 형 LNG 화물창 구조 안전성 평가 시 신뢰도 높은 해석 지원 물성치 확보 측면에서 유용하게 적용되어지리라 사료된다.
Abstract
A secondary barrier made of glass fiber reinforced composites has been installed infinitely using automatic bonding machine(ABM) in membrane type LNG cargo containment system (CCS). At the same time, significant thermal stress due to cryogenic heat shrinkage has occurred in the composite on the non-bonding area between the adhesive fixation at both ends. There have been studies from the perspective of structural safety evaluation taking this into account, but none that have analyzed mechanical property taking an prolonged length into account. In this study, 2-parameter Weibull distribution statistical analysis was used to standardize reliable mechanical property for actual length, taking into account the composite’s brittle fracture of ceramic material with wide fracture strength dispersion. Related experimental data were obtained by performing uniaxial tensile tests at specific temperatures below cryogenic condition considering LNG environment. As a result, the mechanical strength increased about 1.5 times compared to -20℃ at -70℃ and initial non-linear behavior of fiber stretched was suppressed. As the temperature decreased until the cryogenic, the mechanical strength continued to increase due to cold brittleness. The suggested mechanical property in this study would be employed to secure reliable analysis support material property when assessing the safety of secondary barrier’s structures.
참고문헌 (25)
- Schinas, O., "Feasibility and Commercial Considerations of LNG-fueled Ships", Ocean Eng, 122, pp.84~96 (2016)
- Kim, J. H., "Technical Trends of LNG Fueled Ship and Bunkering", Korea Evaluation Institute of Industrial Technology PD Issue Report, 14(10), pp.31~39 (2014)
- Yu, Y. H., "Cryogenic Reliability of Composite Insulation Panels for Liquefied Natural Gas (LNG)Ships", Composite Structures, 94(2), pp.462~468 (2012)
- Esteves, A., "Carriage of LNG: Background and Technological Innovations", 1~40 (2016)
- Oh, D. J., "Reliability Evaluation of a LNGC Insulation System with a Metallic Secondary Barrier", Composite Structures, 171, pp.43~52 (2017)
- Han, S., "Experimental Study on the Structural Behavior of Secondary Barrier of MARK-III LNG CCS", Proc. Int. Conf. Offshore Mech. Arct. Eng. - OMAE (2009)
- Jeong, Y. J., "Evaluation of Mechanical Properties of Glass Fiber-reinforced Composites Depending on Length and Structural Anisotropy", Results in Engineering, 17, pp.101000~ (2023)
- Choi, S. W., "Analysis of Two Main LNG CCS(Cargo Containment System)Insulation Boxes for Leakage Safety Using Experimentally Defined Thermal Properties", Applied Ocean Research, 47, pp.72~89 (2012)
- Yeon-Jae Jeong, "Analysis of glass fiber reinforced composites in Membrane-Type LNG cargo containment system for structural safety using experimentally defined mechanical properties", Composite Structures, 276, pp.114532~ (2021), Elsevier BV[DOI]
- "P. 1421 ISO, Rubber-or Plastics-coated Fabrics-determination of Tensile Strength and Elongation at Break", ISO, ~ (2001)
- 정연제, "멤브레인 형 2차 방벽 이방성 복합재료의 섬유방향에 따른 기계적 성능 평가", 대한조선학회 논문집, 57(3), pp.168~174 (2020), 대한조선학회[DOI]
- 정연제, "Weibull 통계분석을 이용한 MARK-III LNG CCS의 2차 방벽 FSB 파단강도 표준화 연구", 대한조선학회 논문집, 58(3), pp.137~143 (2021), 대한조선학회[DOI]
- "A. Standard, C1239, Standard Practice for Reporting Uniaxial Strength Data Estimating Weibull Distribution Parameters for Advance Ceramics", ASTM Int, ~ (2001)
- He, B., "An Additive Modified Weibull Distribution", Reliability Engineering & System Safety, 145, pp.28~37 (2016)
- Calabria, R., "On the Maximum Likelihood and Least-squares Estimation in the Inverse Weibull Distributions", Statistica Applicata, 2, pp.53~66 (1990)
- Barbero, E., "Statistical Analysis of the Mechanical Properties of Composite Materials", Compos. Part B Eng, 31, pp.375~381 (2000)
- Olteanu, D., "The Evaluation of Median-rank Regression and Maximum Likelihood Estimation Techniques for a Two-parameter Weibull Distribution", Quality Engineering, 22(4), pp.256~272 (2010)
- "Nr. M3101, Rev C-Seconary Barrier Specification", Gaztransport Tech, ~ (2010)
- 정연제, "멤브레인 형 섬유강화 복합재료의 열팽창 이방성을 고려한 열 기계적 특성 분석", 대한조선학회 논문집, 58(1), pp.17~23 (2021), 대한조선학회[DOI]
- Pan, N., "Analysis of Woven Fabric Strengths: Prediction of Fabric Strength Under Uniaxial and Biaxial Extensions", Composites Science and Technology, 56(3), pp.311~327 (1996)
- Anderson, T.L., "Fracture Mechanics: Fundamentals and Applications" (2017)
- A.A. Shahpurwala, "Modeling Woven Fabric Tensile Strength Using Statistical Bundle Theory", Textile Research Journal, 59(1), pp.26~32 (1989), SAGE Publications[DOI]
- Hu, J., "Structure and Mechanics of Woven Fabrics" (2004)
- Szcześniak, L., "Glass Transition Temperature and Thermal Decomposition of Cellulose Powder", Cellulose, 15, pp.445~451 (2008)
- Vosynek, P., "How the Decrease of Collagen or Mineral Affect the Fracture in the Turkey Long Bones", World Academy of Science, Engineering and Technology, 8, pp.1753~1756 (2014)