실선 시운전을 통한 무인수상정 정수중 조종성능 평가
Evaluation of Maneuverability in Still Water of an Unmanned Surface Vehicle through Sea Trials
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper describes the process of evaluating maneuverability in still water of an unmanned surface vehicle based on data measured by performing sea trials. First, we set up a test scenario that is easy to analyze the maneuverability of the unmanned surface vehicle and to identify and verify the dynamics model. Since the attitude of hull varies according to the speed of the unmanned surface vehicle which has a planing hull shape, the relationship between waterjet RPM, speed and attitude is analyzed by performing straight forward tests at various speeds. The turning tests of the unmanned surface vehicle in which the waterjet angle rotates while turning are performed by changing the waterjet rotation angle under the condition of two representative speeds to analyze turning ability. The turning ability of the unmanned surface vehicle includes speed reduction, yaw rate, heel, and turing diameter at steady turning phase according to the speed and RPM.
Abstract
This paper describes the process of evaluating maneuverability in still water of an unmanned surface vehicle based on data measured by performing sea trials. First, we set up a test scenario that is easy to analyze the maneuverability of the unmanned surface vehicle and to identify and verify the dynamics model. Since the attitude of hull varies according to the speed of the unmanned surface vehicle which has a planing hull shape, the relationship between waterjet RPM, speed and attitude is analyzed by performing straight forward tests at various speeds. The turning tests of the unmanned surface vehicle in which the waterjet angle rotates while turning are performed by changing the waterjet rotation angle under the condition of two representative speeds to analyze turning ability. The turning ability of the unmanned surface vehicle includes speed reduction, yaw rate, heel, and turing diameter at steady turning phase according to the speed and RPM.
참고문헌 (9)
- 전명준, "Development of 6-DOF Equations of Motion for a Planning Boat Based on the Results of Sea Trial Tests", 한국항해항만학회지, 40(5), pp.231~239 (2016), 한국항해항만학회[DOI]
- 김동진, "해석적 방법에 의한 선박 시뮬레이터용 단순 조종 모델 개발", 대한조선학회 논문집, 47(6), pp.776~781 (2010), 대한조선학회
- 김동진, "Design of high-speed planing hulls for the improvement of resistance and seakeeping performance", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.161~177 (2013), 대한조선학회
- 김동진, "고속 활주선의 선형에 따른 저항 성능 및 규칙파 중 운동 성능 고찰", 대한조선학회 논문집, 51(5), pp.369~379 (2014), 대한조선학회
- Lewandowski, E. M, "The Dynamics of Marine Craft" (2004), World Scientific
- 박한솔, "워터젯 추진 고속선의 부가물이 침로안정성에 미치는 영향", 대한조선학회 논문집, 48(4), pp.357~362 (2011), 대한조선학회
- 윤현규, "정수중을 활주하는 고속선의 6자유도 운동 모델링 및 시뮬레이션", 대한조선학회 논문집, 53(1), pp.10~17 (2016), 대한조선학회
- Yoon, H. K, "Estimation of the roll hydrodynamic moment model of a ship by using the system identification method and free running model test", IEEE Journal of Oceanic Engineering, 32(4), pp.798~806 (2007)
- 윤현규, "RIB형 표적정의 수평면 조종운동 간략모델", 대한조선학회 논문집, 44(6), pp.572~578 (2007), 대한조선학회