평판 경계층에 대한 스터드의 난류촉진 영향 연구
A Study on Turbulence Stimulation Effect of Studs for Boundary Layer Over a Flat Plate
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The turbulence stimulation effect of studs for boundary layer over a flat plate was investigated through the flow measurement in KRISO cavitation tunnel. For the test, Laser Doppler Velocimetry (LDV) and three flat plate models were used: (1) flat plate without studs; (2) flat plate with one stud row; (3) flat plate with two stud rows. The dimension and location of stud rows and the inflow speed were selected considering test conditions for standard-sized model ships in KRISO towing tank. The boundary layer characteristics of test models were analyzed and compared in terms of mean velocity profiles, turbulence intensity profiles, boundary layer thickness, and shape factor. In the case of the flat plate without studs, transition from laminar to turbulent flow occurred around Rex=3.83 ~ 5.19 × 105. In the case of flat plates with stud rows, the flow rapidly changed into turbulent flow right after passing the first stud row. In the state where turbulence was already developed, the second stud row slightly increased the turbulence intensity near the top of the stud, but did not significantly affect the boundary layer characteristics such as mean velocity distribution, boundary layer thickness, and shape factor.
Abstract
The turbulence stimulation effect of studs for boundary layer over a flat plate was investigated through the flow measurement in KRISO cavitation tunnel. For the test, Laser Doppler Velocimetry (LDV) and three flat plate models were used: (1) flat plate without studs; (2) flat plate with one stud row; (3) flat plate with two stud rows. The dimension and location of stud rows and the inflow speed were selected considering test conditions for standard-sized model ships in KRISO towing tank. The boundary layer characteristics of test models were analyzed and compared in terms of mean velocity profiles, turbulence intensity profiles, boundary layer thickness, and shape factor. In the case of the flat plate without studs, transition from laminar to turbulent flow occurred around Rex=3.83 ~ 5.19 × 105. In the case of flat plates with stud rows, the flow rapidly changed into turbulent flow right after passing the first stud row. In the state where turbulence was already developed, the second stud row slightly increased the turbulence intensity near the top of the stud, but did not significantly affect the boundary layer characteristics such as mean velocity distribution, boundary layer thickness, and shape factor.
참고문헌 (14)
- Coles, D.E., "The young person’s guide to the data", Proceedings Computation of turbulent boundary layers-1968 AFOSR-IFP-Stanford Conference, 2, pp.1~45 (1968), Stanford Univ., Stanford, Calif
- ITTC, "Final report and recommendations to the 25th ITTC", Proceedings of 25th ITTC-Volume I (2008)
- ITTC, "Final report and recommendations to the 26th ITTC. 26th International Towing Tank Conference", Proceedings of26th ITTC-Volume I (2011)
- ITTC, "Final report and recommendations to the 28th ITTC. 28th International Towing Tank Conference", Proceedings of 28th ITTC-Volume I (2017)
- ITTC, "ITTC-recommended procedures and guidelines, ship models", International Towing Tank Conference, 04 (2017)
- IIdstad, J. B., "Use of turbulence stimulation on ship models", Master, pp.2018
- Lee, K. S., "Tackling the laminar-turbulent transition at medium-speed catamarans using computational fluid dynamics", pp.2014
- 이상봉, "초저속 영역에서 난류 촉진기 주위 천이 유동의 직접수치 및 대형 와 모사", 대한조선학회 논문집, 55(3), pp.265~273 (2018), 대한조선학회[DOI]
- A novel approach to turbulence stimulation for ship⁃model testing, "Murphy, J. C.", U.S. Naval Academy, 390~ (2010)
- 백부근, "방오 도료가 도장된 평판에 대한 항력 성능 연구", 대한조선학회 논문집, 50(6), pp.399~406 (2013), 대한조선학회
- Pearson, M., "Modelling laminar-turbulent transition on wave⁃piercing catamarans for enhancing experimental techniques", pp.2015
- Schlichting, H., "Boundary-Layer Theory, 9th ed", pp.419~424 (2017), McGraw Hill
- Silvestri, A., "The application of different tripping techniques to determine the characteristics of the turbulent boundary layer over a flat plate", Journal of Fluids Engineering, 140(1), pp.011204~ (2018)
- Spalding, D. B., "A single formula for the law of the wall", Journal Applied Mechanics, 28, pp.455~457 (1961)