수륙양용장갑차용 워터젯 추진기 캐비테이션 성능 평가
Evaluation of Waterjet Cavitating Performances for a Amphibious Vehicle
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Cavitation tests for a waterjet propulsor of an amphibious vehicle are carried out in the Large Cavitation Tunnel. Waterjet pump performances and cavitation characteristics including thrust breakdown performances are investigated in the tests. In addition, cavitation characteristics for waterjet propulsors working inside the intake are calculated by using a commercial CFD code, Star-CCM+. Sliding mesh is implemented to a rotating impeller and the k-epsilon turbulence model is chosen. Cavitation bubble growth and collapse are estimated using the Schnerr-Sauer cavitation model based on Rayleigh-Plasset equation. Calculated results agree fairly well with experimental results. The re-design of the waterjet propulsor is performed to enhance waterjet cavitating performances and calculated results show that waterjet thrust breakdown characteristics are significantly improved.
Abstract
Cavitation tests for a waterjet propulsor of an amphibious vehicle are carried out in the Large Cavitation Tunnel. Waterjet pump performances and cavitation characteristics including thrust breakdown performances are investigated in the tests. In addition, cavitation characteristics for waterjet propulsors working inside the intake are calculated by using a commercial CFD code, Star-CCM+. Sliding mesh is implemented to a rotating impeller and the k-epsilon turbulence model is chosen. Cavitation bubble growth and collapse are estimated using the Schnerr-Sauer cavitation model based on Rayleigh-Plasset equation. Calculated results agree fairly well with experimental results. The re-design of the waterjet propulsor is performed to enhance waterjet cavitating performances and calculated results show that waterjet thrust breakdown characteristics are significantly improved.
참고문헌 (15)
- Ahn, J. W., "Performance analysis of a mixed-flow pump for waterjet propulsion", Journal of Ship & Ocean Technology, 9(2), pp.11~20 (2005)
- 안종우, "Waterjet 추진장치의 중량감소 펌프 개발", 대한조선학회 논문집, 47(1), pp.30~37 (2010), 대한조선학회
- Dang, J., "Waterjet system performance and cavitation test procedures", Third International Symposium on Marine Propulsors (2013)
- Ferziger, J. H., "Computational methods for fluid dynamics", pp.188~196 (2001), Springer-Verlag Berline
- Han, J., "Analysis of waterjet cavitating performances for amphibious vehicles", KIMST Annual Conference Proceedings (2020)
- Kim, D., "Grid methodology for the analysis of hydrodynamic performances of amphibious assault vehicles", KIMST Annual Conference Proceedings (2020)
- 김제인, "SVA Potsdam 프로펠러 단독 및 캐비테이션 성능 수치해석", 대한조선학회 논문집, 54(3), pp.215~226 (2017), 대한조선학회[DOI]
- 김태형, "고속 상륙돌격장갑차의 저항 및 추진 성능에 관한 수치 분석", 한국군사과학기술학회지, 24(1), pp.84~98 (2021), 한국군사과학기술학회
- Kim, T., "Cavitation performances evaluation results for a waterjet propulsion system with an amphibious vehicle hull", The 11th International Symposium on Cavitation (2021)
- Lindau, J. W., "Propeller cavitation breakdown analysis", Journal of Fluids Engineering, 127, pp.995~1002 (2005)
- Neeley, S. K., "Non-cylindrical blade geometry definition", SNAME Propellers and Shafting Symposium (1997)
- 박일룡, "MR Tanker 실선 및 모형선 프로펠러 캐비테이션 및 변동압력 수치해석 연구", 대한조선학회 논문집, 57(1), pp.35~44 (2020), 대한조선학회[DOI]
- Schnerr, G. H., "Physical and numerical modeling of unsteady cavitation dynamics", Fourth International Conference on Multiphase Flow (2001)
- Shin, K. W., "CFD analysis of ship propeller thrust breakdown", Sixth International Symposium on Marine Propulsors (2019)
- Vaz, G., "Cavitating flow calculations for the E779A propeller in open water and behind conditions: code comparison and solution validation", Fourth International Symposium on Marine Propulsors (2015)