선박의 부가저항 평가를 위한 소프트 계류 모형시험 기법 연구
A Study on Soft-Mooring Model Test Techniques for the Evaluation of Added Resistance on Ships
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, a model test was conducted using the soft-mooring technique to evaluate the added resistance of the ship in waves. The study also examined the specific factors that should be considered during the soft-mooring test. The main purpose of soft-mooring is to prevent drifting caused by waves by providing horizontal restoring forces. However, it can also create undesired restoring forces in the vertical direction. Therefore, we examined the restoring force of the ship's 6-DOF motion based on the arrangement of the soft-mooring and the height of the mooring connection point. We also checked the corresponding resonance period and drift distance. The soft-mooring test was conducted twice, once with self-propulsion and once without self-propulsion, allowing us to review the advantages and disadvantages of each test technique. The main parameters measured in these model tests were 6DOF motion and added resistance on the ship. We compared these measurements obtained from two different techniques (with and without self-propulsion). Additionally, we also compared the measurements based on the types of measuring sensors used (2D load cells on FP, AP, and 1D load cells on each mooring line) as well as the height of the mooring connection point.
Abstract
In this study, a model test was conducted using the soft-mooring technique to evaluate the added resistance of the ship in waves. The study also examined the specific factors that should be considered during the soft-mooring test. The main purpose of soft-mooring is to prevent drifting caused by waves by providing horizontal restoring forces. However, it can also create undesired restoring forces in the vertical direction. Therefore, we examined the restoring force of the ship's 6-DOF motion based on the arrangement of the soft-mooring and the height of the mooring connection point. We also checked the corresponding resonance period and drift distance. The soft-mooring test was conducted twice, once with self-propulsion and once without self-propulsion, allowing us to review the advantages and disadvantages of each test technique. The main parameters measured in these model tests were 6DOF motion and added resistance on the ship. We compared these measurements obtained from two different techniques (with and without self-propulsion). Additionally, we also compared the measurements based on the types of measuring sensors used (2D load cells on FP, AP, and 1D load cells on each mooring line) as well as the height of the mooring connection point.
참고문헌 (23)
- Amaral, G. A., "Mooring system stiffness: A six-degree-of-freedom closed-form analytic formulation", Marine Structures, 84, pp.103189~ (2022)
- Guidelines for Determining Minimum Propulsion Power to Maintain the Manoeuvrability of Ships in Adverse Conditions, "International Maritime Organization", ~, pp.MEPC.1 (2021), Circ.850[DOI]
- Seakeeping tests, "International Towing Tank Conference", ~, pp.ITTC Recommended Procedures and Guidelines 7.5-02-05-04 (2014)
- The Seakeeping Committee Final Report and Recommendations to the 29th ITTC, "International Towing Tank Conference. Seakeeping Committee", ~ (2021)
- Kim, T., "Estimation of added resistance of an LNG carrier in oblique waves", Ocean Engineering, 231, pp.109068~ (2021)
- Kim, Y., "Numerical analysis and experimental validation of added resistance on ship in waves", Journal of Ship Research, 63(4), pp.268~282 (2019)
- Kjellberg, M., "Improved methods for the experimental determination of added resistance in waves", Proceedings of the 6th International Conference on Advanced Model Measurement Technology (AMT) (2019)
- "Deep Ocean Engineering Research Center" (2023)[URL]
- Lee, J. H., "Comparative study on analysis methods for added resistance of four ships in head and oblique waves", Ocean Engineering, 236, pp.109552~ (2021)
- Lee, J., "Experimental investigation on the added resistance of modified KVLCC2hull forms with different bow shapes", Journal of Engineering for the Maritime Environment, 231(2), pp.395~410 (2017)
- Liu, S., "Regression analysis of experimental data for added resistance in waves of arbitrary heading and development of a semi-empirical formula", Ocean Engineering, 206, pp.107357~ (2020)
- Liu, S., "Improvement of the prediction of the added resistance in waves of ships with extreme main dimensional ratios through numerical experiments", Ocean Engineering, 273, pp.113963~ (2023)
- Lu, J., "A study on the effect of parametric roll on added resistance in regular head seas", Ocean Engineering, 122, pp.288~292 (2016)
- Park, D. M., "Study on added resistance of a tanker in head waves at different drafts", Ocean Engineering, 111, pp.569~581 (2016)
- Park, D. M., "Experimental and numerical studies on added resistance of ship in oblique sea conditions", Ocean Engineering, 186, pp.106070~ (2019)
- Park, D. M., "Uncertainty analysis for added resistance experiment of KVLCC2 ship", Ocean Engineering, 95, pp.143~156 (2015)
- Saettone, S., "Experimental measurements of propulsive factors in following and head waves", Applied Ocean Research, 111, pp.102639~ (2021)
- Seo, M. G., "Experimental and numerical analysis of wave drift force on KVLCC2 moving in oblique waves", Journal of Marine Science and Engineering, 9(2), pp.136~ (2021)
- Seo, M. G., "Comparative study on computation of ship added resistance in waves", Ocean Engineering, 73, pp.1~15 (2013)
- Shigunov, V., "International benchmark study on numerical simulation methods for prediction of manoeuvrability of ships in waves", Ocean Engineering, 165, pp.365~385 (2018)
- Shivachev, E., "Impact of trim on added resistance of KRISO container ship (KCS) in head wave: An experimental and numerical study", Ocean Engineering, 211, pp.107594~ (2020)
- Tsujimoto, M., "A practical correction method for added resistance in waves", Journal of the Japan Society of Naval Architects and Ocean Engineers, 8, pp.177~184 (2008)
- Zheng, M., "Experimental investigation on effect of sloshing on ship added resistance in head waves", Ocean Engineering, 235, pp.109362~ (2021)