해양 구조물의 흘수 변화에 따른 판형 구조물이 풍하중 추정에 미치는 영향
Effect of Plate-Shaped Structures on Wind Load Against Variation of Draft
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, wind load on a semi-submersible rig was investigated using Computational Fluid Dynamics (CFD). A maritime atmospheric boundary layer model for wind profile was implemented such that the wind profile shapes were retained throughout the computational domain. Wind load on the semi-submersible rig was calculated under the maritime atmospheric boundary layer and matched well with the results from wind tunnel test within a ±20% error. Overturning moments with variation of draft were investigated by decomposing into drag and lift components. It was observed that the contribution from lift to the overturning moments increased as the draft got higher. The majority of the lift components originated from deckbox which served as a lifting body due to the accelerated streamlines between waterline and the bottom of the deckbox.
Abstract
In this paper, wind load on a semi-submersible rig was investigated using Computational Fluid Dynamics (CFD). A maritime atmospheric boundary layer model for wind profile was implemented such that the wind profile shapes were retained throughout the computational domain. Wind load on the semi-submersible rig was calculated under the maritime atmospheric boundary layer and matched well with the results from wind tunnel test within a ±20% error. Overturning moments with variation of draft were investigated by decomposing into drag and lift components. It was observed that the contribution from lift to the overturning moments increased as the draft got higher. The majority of the lift components originated from deckbox which served as a lifting body due to the accelerated streamlines between waterline and the bottom of the deckbox.
참고문헌 (18)
- ABS, "Commentary on the ABS rules for building and classingmobile offshore drilling units", 2001 Part 3 – Hull Construction & Equipment, ~ (2005)
- API, "Recommended practice for planning, designing and constructing fixed offshore platforms-working stress design" (2000), American Petroleum Institute
- Bert Blocken, "CFD simulation of the atmospheric boundary layer: wall function problems", Atmospheric Environment, 41(2), pp.238~252 (2007), Elsevier BV[DOI]
- Ghia, U., "Procedure for estimation and reporting of uncertainty due to discretization in CFD applications", Journal of Fluids Engineering, 130(7), pp.078001~078004 (2008)
- DNV, "DNV-RP-C205: Environmental Conditions and Environmental Loads October 2010", DNV, ~ (2010)
- DNV, "Rules for the Certification and Construction", IV Industrial Services, ~ (2013)
- Kim, J., "Numerical modeling of neutrally-stable and sustainable atmospheric boundary layer for the CFD simulation of wind load on offshore floating facilities", 37th International Conference on Ocean. Offshore and Arctic Engineering (2018)
- Kim, J., "Developing industry guidelines for the CFD-based evaluation of wind load on offshore floating facilities", Offshore Technology Conference (2019)
- Kim, J., "Numerical modeling of sustainable atmospheric boundary layers for offshore floaters", 39th International Conference on Ocean. Offshore & Arctic Engineering (2020)
- OCIMF, "Prediction of wind and current loads on VLCCs", Oil Companies International Marine Forum London (1994)
- Richards, P., "Appropriate boundary conditions for computational wind engineering models using the k-e turbulence model", Journal of Wind Engineering and Industrial Aerodynamics, 46, pp.145~153 (1993)
- Richards, P., "Appropriate boundary conditions for computational wind engineering models revisited", Journal of Wind Engineering and Industrial Aerodynamics, pp.257~266 (2011)
- Sumner, J., "kE simulations of the neutral ABL: achieving horizontal homogeneity on practical grid", 48th AAIA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition (2010)
- "MARIN:Wageningen", 2015
- Weller, H. G., "A tensorial approach to computational continuum mechanics using object-oriented techniques", Computers in Physics, 12(6), pp.620~631 (1998)
- Xing, T., "Factors of safety for richardson extrapolation", Journal of Fluids Engineering, 132 (2010)
- Yeon, S.M., "Numerical modeling practice and verification of the wind load estimation for FPSO and semi-submersible", 38th International Conference on Ocean. Offshore & Arctic Engineering, Glasgow (2019)
- Seong Mo Yeon, "Numerical wind load estimation of offshore floating structures through sustainable maritime atmospheric boundary layer", International Journal of Naval Architecture and Ocean Engineering, 12, pp.819~831 (2020), 대한조선학회[DOI]