프로펠러 설계 및 선미 부가물 수정에 따른 캐비테이션 초기발생 선속(CIS) 성능 향상 연구
Study of the Cavitation Inception Speed (CIS) Improvement Through the Propeller Design and the Stern Appendage Modification
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In order to improve the propeller Cavitation Inception Speed (CIS) performance, it needs to modify the propeller geometry and the wake distribution that flows into the propeller. In the previous study, the twisted angles of the V-strut were modified to improve propeller CIS, cavitation behavior and pressure fluctuation performances. Then the propeller behind the modified V-strut (New strut) showed better cavitation characteristics than that behind the existing V-strut (Old strut). However, the CIS of Suction Side Tip Vortex (SSTV) and Pressure Side Tp Vortex (PSTV) showed a big difference at behind each V-strut. In this study, the balance design is conducted to minimize the difference between SSTV CIS and PSTV CIS at behind each V-strut. To improve the propeller CIS performance, 1 propeller is designed at behind the old strut and 3 propellers are designed at behind the new strut. The propeller CIS is increased through the balance design and the stern appendage modification. The final propeller CIS is increased about 5.3 knots higher than that of the existing propeller at behind the old strut. On the basis of the present study, it is thought that the better improvement method for the propeller CIS would be suggested.
Abstract
In order to improve the propeller Cavitation Inception Speed (CIS) performance, it needs to modify the propeller geometry and the wake distribution that flows into the propeller. In the previous study, the twisted angles of the V-strut were modified to improve propeller CIS, cavitation behavior and pressure fluctuation performances. Then the propeller behind the modified V-strut (New strut) showed better cavitation characteristics than that behind the existing V-strut (Old strut). However, the CIS of Suction Side Tip Vortex (SSTV) and Pressure Side Tp Vortex (PSTV) showed a big difference at behind each V-strut. In this study, the balance design is conducted to minimize the difference between SSTV CIS and PSTV CIS at behind each V-strut. To improve the propeller CIS performance, 1 propeller is designed at behind the old strut and 3 propellers are designed at behind the new strut. The propeller CIS is increased through the balance design and the stern appendage modification. The final propeller CIS is increased about 5.3 knots higher than that of the existing propeller at behind the old strut. On the basis of the present study, it is thought that the better improvement method for the propeller CIS would be suggested.
참고문헌 (8)
- 안종우, "대형캐비테이션터널(LCT) 실물 구동펌프 성능시운전", 대한조선학회 논문집, 52(6), pp.428~434 (2015), 대한조선학회
- 안종우, "선미 부가물 수정에 따른 프로펠러 캐비테이션 성능 향상 연구", 대한조선학회 논문집, 60(1), pp.1~9 (2023), 대한조선학회[DOI]
- Ahn, J. W., "Method for installing a dummy body that reproduces the stern flow of a model ship in a large cavitation tunnel", Patent number 10-2393987, ~ (2022)
- McCormick, B. W., "On cavitation produced by a vortex trailing from a lifting surfaces", pp.369~379 (1962), Journal of Basic Engineering
- 백부근, "대형 캐비테이션 터널 내 선박 모형의 3차원 선체 반류 계측을 위한 레이저 유속계 개발", 대한조선학회 논문집, 54(6), pp.515~521 (2017), 대한조선학회[DOI]
- 박일룡, "KRISO 대형 캐비테이션터널 시험조건의 함정 모형선반류에 대한 수치해석적 연구", 대한조선학회 논문집, 53(6), pp.494~502 (2016), 대한조선학회
- Park, I. R., "Numerical study on tip vortex cavitation inception on a foil", Journal Applied Sciences, 7332 (2021)
- "STAR-CCM+ 11.04 User Guide" (2018)[URL]