인간 동작 표현용 스프링 백본 구조 소프트 암의 구현
Implementation of a Spring Backboned Soft Arm Emulating Human Gestures
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study deals with the design of a spring backboned soft arm, which will be employed for generation of human gesture as an effective means of Human‐Robot interaction. The special features of the proposed mechanism are the light weight and the flexibility of the whole mechanism by using a spring backbone. Thus, even in the case of collision with human, this device is able to absorb the impact structurally. The kinematics and the design for the soft arm are introduced. The performance of this mechanism was shown through experiment emulating several human gestures expressing human emotion and some service contents. Finally, this soft arm was implemented as the wing mechanism of a penguin robot.
Abstract
This study deals with the design of a spring backboned soft arm, which will be employed for generation of human gesture as an effective means of Human‐Robot interaction. The special features of the proposed mechanism are the light weight and the flexibility of the whole mechanism by using a spring backbone. Thus, even in the case of collision with human, this device is able to absorb the impact structurally. The kinematics and the design for the soft arm are introduced. The performance of this mechanism was shown through experiment emulating several human gestures expressing human emotion and some service contents. Finally, this soft arm was implemented as the wing mechanism of a penguin robot.
참고문헌 (13)
- J.L. Burke, "Final Report for the DARPA", NSF Interdisciplinary Study on Human– Robot Interaction, 2004, pp.34(2), 103~112
- M. Blow, "Perception of Robot Smiles and Dimensions for Human‐Robot Interaction Design", in Proc. 15th IEEE International Symposium on Robot and Human Interactive Communication, pp.469~474 (2006)
- M. Hackel, "A Humanoid Robot Platform Suitable for Studying Embodied Interaction", in Proc. IEEE, 2005, 2443~2448
- 이성환, "Gesture spotting and recognition for human-robot interaction", IEEE TRANS ROBOT, 23(2), pp.256~270, 미국
- T.P. Spexard, "Human‐Oriented Interaction with an AnthropomorphicRobot", IEEE Transactions on Robotics, 23(5), pp.852~862 (2007)
- S. Kawamura, "A design of motion‐support robots for human arms using hexahedron rubber actuators", in Proc. IEEE, 1997, 1520~1526
- D.‐G. Choi, "Design of a Spring Backbone Micro Endoscope", in Proc. IEEE, 2007, 1815~1821
- "IEEE Robotics & AutomationMagazine", 2004, 22~33
- J.‐J. Park, "Safe Link Mechanism based on PassiveCompliance for Safe Human‐Robot Collision", inProc. IEEE Int. Conf. on Robotics andAutomation, pp.1152~1157 (2007)
- J.‐J. Park, "Safe Joint Mechanism based on Passive Compliance for Collision Safety", in Proc. IEEE Int. Conf. on Advanced Robotics, pp.473~478 (2007)
- "IEEERobotics & Automation Magazine", 2004, 12~21
- Y. Akamatsu, "Development of a soft manipulator with flexiblejoints using smart fluid and Pneumatics cushionfor collision with human", in Proc. IEEE, 2007, pp.1(6), ~
- S.‐S. Yoon, "Safe arm with MR‐based passive compliant joints and viscous‐elastic covering for service robot applications", in Proc. IEEE, 2003, 2191~2196