고중량의 원통형 작업대상물 파지용 집게형 그리퍼의 슬립 조건과 이를 반영한 설계 및 해석
Slip Considered Design and Analysis Pincers-type Gripper for Seizing Heavy-weighted Cylindrical Objects
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
This paper dealt with a pincers-type gripper being able to grip a heavy-weighted cylindrical object having various size with itself. This gripper should be designed to seize the objects without any change of jaw shape. Grasping achieved equilibrium after the object slipped on the jaw while grasping it. To cope with this situation, we suggested the slip considered gripper design procedure based on grasping equilibrium. The obtained slip condition can provide a limit friction coefficient depending on the contact angle when initiating contact between jaw and object. Consequently, the gripping force and the required actuating force can be calculated. In order to verify the proposed slip condition, the simulations were performed using a dynamic software.
Abstract
This paper dealt with a pincers-type gripper being able to grip a heavy-weighted cylindrical object having various size with itself. This gripper should be designed to seize the objects without any change of jaw shape. Grasping achieved equilibrium after the object slipped on the jaw while grasping it. To cope with this situation, we suggested the slip considered gripper design procedure based on grasping equilibrium. The obtained slip condition can provide a limit friction coefficient depending on the contact angle when initiating contact between jaw and object. Consequently, the gripping force and the required actuating force can be calculated. In order to verify the proposed slip condition, the simulations were performed using a dynamic software.
참고문헌 (9)
- Andreas Wolf, "Gripper in motion" (2006), Springer
- 유홍선, "와이어 기반의 적응형 로봇 핸드", 로봇학회 논문지, 9(4), pp.258~263 (2014), 한국로봇학회[DOI]
- Dubey, Venketesh N, "A finger mechanism for adaptive end effectors", International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp.995~1001 (2002)
- 조영수, "텐던 구동 로봇 메커니즘의 일반화된 그래프 표현", 로봇학회 논문지, 9(3), pp.178~184 (2014), 한국로봇학회
- J. Butterfass, "Design and experiences with DLR hand II", Automation Congress, 15, pp.105~110 (2004)
- 이상문, "멕조인트를 이용한 다관절 로봇핸드 설계", 로봇학회 논문지, 7(1), pp.1~8 (2012), 한국로봇학회
- Technology development for a rescue robot capable of lifting over 120kgf, "Civil-military technology cooperation", ~ (2013)
- J. Ponce, "On computing four-finger equilibrium and force-closure grasps of polyhedral objects", The International Journal of Robotics Research, 16(1), pp.11~35 (1997)
- "RecurDyn V8R3"[URL]