근사적 모델 역변환을 활용한 전기 - 유압 액추에이터의 적응 위치 제어기 설계
Adaptive Position Controller Design of Electro - hydraulic Actuator Using Approximate Model Inversion
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
An electro-hydraulic actuator (EHA) is widely used in industrial motion systems and the increasing bandwidth of EHA position control is important issue. The model-inverse feedforward controller is known to extend the bandwidth of system. When the system has non-minimum phase (NMP) zeros, direct model inversion makes system unstable. To overcome this problem, an approximate model-inverse method is used. A representative approximate model inversion method is zero phase error tracking control (ZPETC). However, if zeros locate right half plane of z-plane, the approximate inverse model amplifies the high-frequency response. In this paper, to solve the problem of ZPETC, an adaptive model-inverse control is proposed. The adaptive algorithm updates feedforward term in real-time. The effectiveness of the proposed adaptive model-inverse position control strategy is verified by comparison with typical proportional-integral (PI) control and feedforward control by experiments. As a result, the proposed adaptive controller extends the bandwidth of EHA position control.
Abstract
An electro-hydraulic actuator (EHA) is widely used in industrial motion systems and the increasing bandwidth of EHA position control is important issue. The model-inverse feedforward controller is known to extend the bandwidth of system. When the system has non-minimum phase (NMP) zeros, direct model inversion makes system unstable. To overcome this problem, an approximate model-inverse method is used. A representative approximate model inversion method is zero phase error tracking control (ZPETC). However, if zeros locate right half plane of z-plane, the approximate inverse model amplifies the high-frequency response. In this paper, to solve the problem of ZPETC, an adaptive model-inverse control is proposed. The adaptive algorithm updates feedforward term in real-time. The effectiveness of the proposed adaptive model-inverse position control strategy is verified by comparison with typical proportional-integral (PI) control and feedforward control by experiments. As a result, the proposed adaptive controller extends the bandwidth of EHA position control.
참고문헌 (20)
- H.E. Merrit, "Merrit, Hydraulic Control Systems" (1967), Wiley
- M. Jelali, "Hydraulic Servo-systems- Modeling, Identification and Control" (2004), Springer
- E. Detiek, "An Intelligent Electro-Hydraulic Servo Drive Positioning", Journal of Mechanical Engineering, 57(5), pp.394~404 (2011)
- Y. Lin, "Controller Design for Hydraulic Position Control Systems", Ph.D, pp.2011
- L. Li, "Accurate position control of a servo-hydraulic test cylinder by iterative learning control technique", UKSim-AMSS 8th European Modelling Symposium on Computer Modelling and Simulation, pp.297~302 (2014)
- M. Karpenko, "On quantitative feedback design for robust position control of hydraulic actuators", Control Engineering Practice, 18, pp.289~299 (2010)
- S. Fu, "Characteristics and control technology research of three-stage electro-hydraulic servo valve", Journal of Applied Science and Engineering Innovation, 2, pp.43~45 (2015)
- 김선민, "더블 베인 회전형 유압 구동시스템의 임피던스 제어를 위한 토크 서보 설계", 로봇학회 논문지, 5(2), pp.160~168 (2010), 한국로봇학회
- B. Widrow, "Adaptive Inverse Control-A signal processing approach" (2007), WILEY INTERSCIENCE
- S.O. Haykin, "Adaptive filter theory" (2013), Prentice Hall
- G. Shen, "Adaptive feed-forward compensation for hybrid control with acceleration time waveform replication on electro-hydraulic shaking table", Control Engineering Practice, 21, pp.1128~1142 (2013)
- R. Krneta, "Recursive least squares method in parameters identification of dc motors models", Facta Universitatis(NIS), SER.: ELEC. ENERG, 18(3), pp.467~478 (2005)
- D. Wang, "Input-output data filtering based recursive least squares identification for CARARMAsystems", Digital Signal Processing, 20, pp.991~999 (2010)
- J.D. Cuyper, "State space modeling and stable dynamic inversion for trajectory tracking on an industrial seat test rig", Journal of vibration and control, 8(7), pp.1033~1050 (2002)
- M. Verhaegen, "Identification of the deterministic part of mimo state space models given in innovations form from input-output data", Automatica, 30, pp.61~74 (1994)
- K.J. strm, "Zeros of sampled systems", Automatica, 20, pp.31~38 (1984)
- J.A. Butterworth, "Fitting discrete-time models to frequency responses for systems with transport delay", Proc International Mechanical Engineering Congress and Exposition, 7, pp.1321~1328 (2011)
- B.P. Rigney, "Model inversion architectures for settle time applications with uncertainty", Proc IEEE conf dec ctrl, pp.6518~6524 (2006)
- M. Tomizuka, "Zero phase error tracking algorithm for digital control", Journal of Dynamic Systems, Measurement and Control, 100, pp.65~68 (1987)
- J.A. Butterworth, "Analysis and comparison of three discrete-time feedforward model-inverse control techniques for nonminimum-phase systems", Mechatronics, 22, pp.577~587 (2012)