수정된 RLS 기반으로 관절 토크 센서를 이용한 로봇에가해진 외부 힘 예측 및 펙인홀 작업 구현
External Force Estimation by Modifying RLS using Joint Torque Sensor for Peg-in-Hole Assembly Operation
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, a method for estimation of external force on an end-effector using joint torque sensor is proposed. The method is based on portion of measure torque caused by external force. Due to noise in the torque measurement data from the torque sensor, a recursive least-square estimation algorithm is used to ensure a smoother estimation of the external force data. However it is inevitable to create a delay for the sensor to detect the external force. In order to reduce the delay, modified recursive least-square is proposed. The performance of the proposed estimation method is evaluated in an experiment on a developed six-degree-of-freedom robot. By using NI DAQ device and Labview, the robot control, data acquisition and The experimental results output are processed in real time. By using proposed modified RLS, the delay to estimate the external force with the RLS is reduced by 54.9%. As an experimental result, the difference of the actual external force and the estimated external force is 4.11% with an included angle of 5.04° while in dynamic state. This result shows that this method allows joint torque sensors to be used instead of commonly used external sensory system such as F/T sensors.
Abstract
In this paper, a method for estimation of external force on an end-effector using joint torque sensor is proposed. The method is based on portion of measure torque caused by external force. Due to noise in the torque measurement data from the torque sensor, a recursive least-square estimation algorithm is used to ensure a smoother estimation of the external force data. However it is inevitable to create a delay for the sensor to detect the external force. In order to reduce the delay, modified recursive least-square is proposed. The performance of the proposed estimation method is evaluated in an experiment on a developed six-degree-of-freedom robot. By using NI DAQ device and Labview, the robot control, data acquisition and The experimental results output are processed in real time. By using proposed modified RLS, the delay to estimate the external force with the RLS is reduced by 54.9%. As an experimental result, the difference of the actual external force and the estimated external force is 4.11% with an included angle of 5.04° while in dynamic state. This result shows that this method allows joint torque sensors to be used instead of commonly used external sensory system such as F/T sensors.
참고문헌 (21)
- J.B. Beak, "The case study on robot gripper for gripping force control robot gripper", KSPE Spring Conference, pp.435~436 (2015)
- M.T. Mason, "Compliance and force control for computer controlled manipulators", IEEE Transactions on Systems, Man, and Cybernetics, 11(6), pp.418~432 (1981)[DOI]
- T. Tsuji, "Multi-point impedance control for redundant manipulators", IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 26(5), pp.707~718 (1996)[DOI]
- C.H. Park, "Direct teaching algorithm for a manipulator in a constraint condition using the teaching force shaping method", Advanced Robotics, 24(8-9), pp.1365~1384 (2010)[DOI]
- 전풍우, "힘제어 기반의 틈새 추종 로봇의 제작 및 제어에 관한 연구 : Part II. 힘제어", 제어.로봇.시스템학회 논문지, 11(4), pp.337~343 (2005), 제어·로봇·시스템학회
- B. Siciliano, "Springer Handbook of Robotics" (2008), Springer
- O. Kerpa, "Development of a flexible tactile sensor system for a humanoid robot", 2003 IEEE, 2003, ~
- A. Stolt, "Force controlled robotic assembly without a force sensor", 2012 IEEE International Conference on Robotics and Automation (2012)
- S. Lu, "Human-robot collision detection and identification based on wrist and base force", torque sensors, 2005 (2005), ~
- P.J. Hacksel, "Estimation of environment forces and rigid-body velocities using observers", 1994 IEEE International Conference on Robotics and Automation (1994)
- N. Prajumkhaiy, "Sensorless force estimation of SCARA robot system with friction compensation", Procedia Computer Science, 86, pp.120~123 (2016)[DOI]
- M. Jin, "Robust compliant motion control of robot with nonlinear friction using time-delay estimation", IEEE Transactions on Industrial Electronics, 55(1), pp.258~269 (2008)[DOI]
- J. Jung, "Robust contact force estimation for robot manipulators in three-dimensional space", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220(9), pp.1317~1327 (2006)[DOI]
- A. Stolt, "Force controlled robotic assembly without a force sensor", 2012 IEEE International Conference on Robotics and Automation (2012)
- 박영진, "유연관절로봇을 위한 정확한 외부토크 측정시스템 개발: 랜덤워크모델을 이용한 칼만필터 기반 추정", 로봇학회 논문지, 9(1), pp.11~19 (2014), 한국로봇학회[DOI]
- D. Tsetserukou, "Optical torque sensors for implementation of local impedance control of the arm of humanoid robot", 2006 IEEE International Conference on Robotics and Automation (2006)
- J.-K. Min, "Robot joint module equipped with joint torque sensor with disk-type coupling for torque error reduction", International Conference on Intelligent Robotics and Applications, pp.371~378 (2015)
- 민재경, "토크 오차 감소를 위한 디스크형 커플링을 갖는 토크센서가 내장된 로봇 관절모듈", 대한기계학회논문집 A, 40(2), pp.133~138 (2016), 대한기계학회
- M.W. Spong, "Modeling and control of elastic joint robots", Journal of dynamic systems, measurement, and control, 109(4), pp.310~318 (1987)[DOI]
- Ljung, L, "System identification, Signal Analysis and Prediction" (1998), Birkhauser
- M. Van Damme, "Estimating robot end-effector force from noisy actuator torque measurements", 2011 IEEE International Conference on Robotics and Automation (2011)