직교좌표계 가속도 외란 추정을 통한 충돌 감지 알고리즘 개발
Development of Collision Detection Method Using Estimation of Cartesian Space Acceleration Disturbance
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we propose a new collision detection algorithm for human-robot collaboration. We use an IMU sensor located at the tip of the manipulator and the kinematic behavior of the manipulator to detect the unexpected collision between the robotic manipulator and environment. Unlike other method, the developed algorithm uses only the kinematic relationship between the manipulator joint and the end effector. Therefore, the collision estimation signal is not affected by the error of the dynamics model. The proposed collision detection algorithm detects the collision by comparing the estimated acceleration of the end effector derived from the position, velocity and acceleration trajectories of the robot joints with the actual acceleration measured by the sensor. In simulation, we compare the performance of our method with the conventional Residual Observer (ROB). Our method is less sensitive to the load variation because of the independency on the dynamic modeling of the manipulator.
Abstract
In this paper, we propose a new collision detection algorithm for human-robot collaboration. We use an IMU sensor located at the tip of the manipulator and the kinematic behavior of the manipulator to detect the unexpected collision between the robotic manipulator and environment. Unlike other method, the developed algorithm uses only the kinematic relationship between the manipulator joint and the end effector. Therefore, the collision estimation signal is not affected by the error of the dynamics model. The proposed collision detection algorithm detects the collision by comparing the estimated acceleration of the end effector derived from the position, velocity and acceleration trajectories of the robot joints with the actual acceleration measured by the sensor. In simulation, we compare the performance of our method with the conventional Residual Observer (ROB). Our method is less sensitive to the load variation because of the independency on the dynamic modeling of the manipulator.
참고문헌 (9)
- S. Haddadin, "Safety evaluation of physical human-robot interaction via crash-testing", Robotics: Science and Systems, pp.217~224 (2007)
- P. P. Lele, "The reaction time to touch", The Journal of Physiology, 123(1), pp.187~203 (1954)
- 오연택, "인간과의 안전한 상호 작용을 고려한 휴머노이드 조인트 모듈 개발", 로봇학회 논문지, 9(4), pp.264~271 (2014), 한국로봇학회[DOI]
- W. Lihui, "Vision-guided active collision avoidance for human-robot collaborations", Manufacturing Letters, 1(1), pp.5~8 (2013)
- M. Nakao, "A robust decentralized joint control based on interference estimation", Proceedings IEEE International Conference on Robotics and Automation, pp.326~331 (1987)
- A.D. Luca, "Sensorless robot collision detection and hybrid force", motion control, 2005, 999~1004
- D. Alessandro, "Integrated control for pHRI: Collision avoidance, detection, reaction and collaboration", Biomedical Robotics and Biomechatronics (BioRob), 2012 4th IEEE RAS & EMBS International Conference on. IEEE, pp.288~295 (2012)
- 정병진, "Human-robot collision detection under modeling uncertainty using frequency boundary of manipulator dynamics", Journal of Mechanical Science and Technology, 28(11), pp.4389~4395 (2014), 대한기계학회
- T. Teodor, "A unified framework for external wrench estimation, interaction control and collision reflexes for flying robots", Intelligent Robots and Systems (IROS 2014), 2014 IEEE, 2014, 4197~4024