저가 수중 무인 이동체 개발 및 운동성능 검증
Development of a Low-cost Unmanned Underwater Vehicle and Performance Verification
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, a high performance underwater vehicle which can be manufactured at low cost is designed and fabricated, and its performance is verified through experiments. To improve efficiency, the Myring equation is used to design the appearance and the duct structure including the thruster is planned to increase the propulsion efficiency while reducing the drag force. Through various methods, it is secured stable waterproof performance, and also is devised to have high speed movement and turning performance. The developed underwater vehicle is equipped with a high output BLDC motor to achieve a linear speed of up to 2 m/s and can change direction rapidly with stability through four rudders. The rudders are driven by coupling a timing belt and a pulley by extending the axis of a servo motor, and are equipped at the end of the body to turn heading. In addition, for stable posture control, the roll keeps its internal center of gravity low and maintains its stability due to restoring force. By controlling the four rudders, pitch and yaw are handled by the PID controller and show stable performance. To investigate the horizontal turning performance, it is confirmed that the yaw rate controller is designed and stable yaw rate control is performed.
Abstract
In this paper, a high performance underwater vehicle which can be manufactured at low cost is designed and fabricated, and its performance is verified through experiments. To improve efficiency, the Myring equation is used to design the appearance and the duct structure including the thruster is planned to increase the propulsion efficiency while reducing the drag force. Through various methods, it is secured stable waterproof performance, and also is devised to have high speed movement and turning performance. The developed underwater vehicle is equipped with a high output BLDC motor to achieve a linear speed of up to 2 m/s and can change direction rapidly with stability through four rudders. The rudders are driven by coupling a timing belt and a pulley by extending the axis of a servo motor, and are equipped at the end of the body to turn heading. In addition, for stable posture control, the roll keeps its internal center of gravity low and maintains its stability due to restoring force. By controlling the four rudders, pitch and yaw are handled by the PID controller and show stable performance. To investigate the horizontal turning performance, it is confirmed that the yaw rate controller is designed and stable yaw rate control is performed.
참고문헌 (19)
- 박영식, "수중 측위 시스템과 SVR을 이용한 음영지역에서의 경로 추정 기법", 로봇학회 논문지, 12(2), pp.173~183 (2017), 한국로봇학회
- 권대현, "사이드 스캔 소나 기반 Pose-graph SLAM", 로봇학회 논문지, 12(4), pp.385~394 (2017), 한국로봇학회[DOI]
- G. Mailfert, "REDERMOR: an experimental platform for ROV", AUV field sea trials, 1998, 357~362
- 최형식, "새로운 Convertible ROV의 설계 연구", 한국마린엔지니어링학회지, 36(4), pp.451~458 (2012), 한국마린엔지니어링학회[DOI]
- F.A. Azis, "Problem identification for underwater remotely operated vehicle (ROV): A case study", Procedia Engineering, 41, pp.554~560 (2012)[DOI]
- 이판묵, "UUV(수중로봇)의 소개와 요소기술", 한국정밀공학회지, 26(5), pp.7~13 (2009), 한국정밀공학회
- [URL]
- [URL]
- D. Hwang, "Design and manufacture of underwater vehicle with effective waterproof performance", 13th Korea Robotics Society Annual Conference, pp.7~8 (2018)
- D. F. Myring, "A theoretical study of body drags in subcritical axisymmetric flow", The Aeronautical Quarterly, 27(3), pp.186~194 (1976)[DOI]
- 전봉환, "자율무인잠수정 테스트베드 이심이의 개발과 수조시험", 한국해양공학회지, 21(2), pp.67~74 (2007), 한국해양공학회
- D.-J. Won, "Design Optimization of Ducted Type AUV using CFD Analysis", Intelligent Service Robotics, 8(4), pp.233~245 (2012)
- [URL]
- 김영현, "덕트형 수중 이동 로봇의 선회력 극대화를 위한 방향타 메커니즘 설계", 제어.로봇.시스템학회 논문지, 23(9), pp.771~779 (2017), 제어·로봇·시스템학회[DOI]
- [URL]
- [URL]
- [URL]
- 김창민, "유체항력 계산을 통한 자율무인잠수정의 운동성능 예측과 실험", 한국마린엔지니어링학회지, 39(6), pp.614~619 (2015), 한국마린엔지니어링학회[DOI]
- M. Jang, "Experimental verification of rotating motion performance of duct type submersible mobile robot", 13th Korea Robotics Society Annual Conference, pp.422~423 (2018)