잇솔질 마모 처리한 불소방출성 수복재의 특성
Characteristics of fluoride releasing restorative materials after toothbrush-dentifrice abrasion
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
불소는 항우식 작용을 보이므로 치아의 우식예방을 고려한 진료가 이루어지면서 치면에 불화물을 도포하거나 불소 함유 구강세정액을 사용하거나 불소방출성의 수복재료를 적용하거나 하는 등의 우식억제 방법이 치과임상에서 빈번하게 적용되고 있다. 이에 본 연구는 불소 방출을 보이는 수복재료의 잇솔질 후 불소방출과 잇솔질로 인한 표면조도의 변화를 조사하기 위해 시행되었다. 7종의 불소를 방출하는 수복재료로 Fuji Ⅱ LC Improved:FL, Compoglass F: CG, Dyract AP: DR, F2000: FT, Ariston: AT, Tetric: TR, 그리고 Gradia: GD를 연구재료로 사용하였다. 불소 방출은 10,000회의 잇솔질을 시행한 후 10일 동안의 방출량을 측정하였고, 표면조도는 40,000회의 잇솔질 후 중심선평균거칠기 Ra와 최대거칠기 Ry를 측정하였으며, 마모면은 주사전자현미경으로 관찰하였다. 잇솔질 후의 불소 방출량과 표면 관찰로부터 다음과 같은 결론을 얻었다. 1. 불소방출은 AT군, FL군 및 CF군의 경우에는 초기단계에 다량의 급격한 방출을 보인 후 상대적으로 낮으면서도 지속적인 방출 양상을 보였지만, 나머지 시험군의 경우에는 초기단계로부터 낮으면서도 지속적인 방출을 보였다. 2. 불소방출은 약 40일 경과 후 안정적인 방출 양상을 나타냈으며, Tukey 분석 결과, AT군, 레진강화 GIC의 FL군, 콤포머군 전부 및 불소방출성 콤포짓트 레진의 GD군과 TC군 사이에서 통계학적으로 방출량의 유의한 차이을 보였다(P<0.05). 3. 표면조도는 FT군에서 가장 크고 CF군에서 가장 작은 값을 보였으며, Tukey 분석 결과, FT군, AL군 및 FL군과 TC군, DR군, GD군 및 CF군 사이에서 통계학적으로 유의한 차이를 보였다(P<0.05).
Abstract
The objectives of this study were to evaluate the fluoride release and the change of surface roughness of fluoride releasing restorative materials after toothbrush-dentifrice abrasion. Seven commercially available fluoride releasing restorative materials (Fuji Ⅱ LC Improved: FL, Compoglass F: CG, Dyract AP: DR, F2000: FT, Ariston: AT, Tetric: TR, and Gradia: GD) were selected as experimental materials. The results obtained were summarized as follows: 1. The AT, FL, and CF groups produce an initially large burst of fluoride release and comparatively low but continuous release of fluoride. But other groups produce no initial burst of fluoride and levels of release remain relatively constant. 2. The rate of fluoride release remains steady state after 40 days. The results of Tukey's test (P<.05), the fluoride release showed the order of decreasing rank as follows: AT > FL > compomers > TC and GD. 3. The surface roughness indicated that the highest value was observed in the FT group and the lowest value was observed in the CF group. The surface roughness of Tukey's test showed the significant differences between groups of FT, AT and FL and groups of CF, DR, GD and TC (P<0.05).
참고문헌 (27)
- "Fluoride-releasing liners:in vitro recurrent caries", 39, pp.12~17 (1991)
- "Resin-modified glass ionomer cements:fluoride release and uptake", 53, pp.222~225 (1995)
- "Mutans streptococci in plaque from margins of amalgam", and glass-io(mer restorations), pp.861~864 (1990)
- "Fluroride-releasing core build-up materials and artificial caries", 4, pp.207~210 (1991)
- "Fluoride ion diffusion from polyalkenoate (glass-ionomer) cements", 9, pp.454~456 (1998)
- "Short and long-term fluoride release from glass ionomer and other fluoride containing materials in vitro", 98, pp.179~185 (1990)
- "Fluoride release in vitro from various glass ionomer cements and resin composites after exposure to NaF solutions", 9, pp.350~354 (1993)
- "Developments in glass-ionomer cements", 2, pp.438~446 (1989)
- "Proposed nomenclature for glass-ionomer dental cements and related materials(guest editorial)", 25, pp.587~589 (1994)
- "Properties of resin-modified glass- ionomer restorative materials and two polyacid-modified resin composite materials", 27, pp.203~209 (1996), Quintessence Int
- "Comparative physico- chemical characterization of new hybrid restorative materials", 76, pp.883~894 (1997)
- "In vitro Fatigue behaviour of restorative composites and glass ionomers", 11, pp.137~141 (1995)
- "Short-term Fluoride Release", uptake of glass ionomer restoratives, 1995, pp.11, 96~101
- "Acid-base reaction and fluoride release profiles in visible light-cured polyacid-modified composite restoratives(compomers)", 14, pp.57~63 (1998)
- "A comparison of fluoride release from various dental materials", 26, pp.259~265 (1998)
- "Fluoride Release from glass- ionomer and compomer restorative materials:6-month data", 26, pp.355~359 (1998)
- "The uptake and release of fluoride by ion-leaching cements after exposure to toothpaste", 26, pp.591~597 (1998)
- "Fluoride uptake in bovine enamel and dentin from a fluoride releasing composite resin", 21, pp.541~544 (1990)
- "Compressive strength, fluoride release and recharge of fluoride-releasing materials", 24, pp.2451~2461 (2003)
- "The influence of oral fluid on composite resin and glass inomer cement", 52, pp.182~189 (1984)
- "Restoration of fractured and hypoplastic incisors by the acid etch resin technique:a three-year reports", 95, pp.795~803 (1997)
- "Effects of finishing on color and gloss of composites with different fillers(Abstr No 451)", 62, pp.219~ (1983)
- "Prophylaxis abrasives affect surface roughness of composites and hybrid ionomers(Abstract No 948)", 73, pp.220~ (1994)
- "In vitro toothbrush- dentifrice abrasion of resin-modified glass ionomers", 13, pp.82~88 (1997)
- "Composite resins in the 21st century", 24, pp.641~658 (1993)
- "Microhardness as an indicator for finishing time on ionomer restoratives(Abstract No 945)", 73, pp.220~ (1994)
- "Three-body wear of glass ionomer cements" (1994)
