본문 바로가기
KERD
논문KCI 등재

글라스 아이오노머 수복재의 불소 유리 및 재흡수양상

Fluoride release and recharge of glass ionomer cements

2

조회

0

다운로드

8

인용

0

참고문헌

키워드

주제분류치의학

초록

이차 우식은 수복 실패의 주된 원인 중 하나로 지목되고 있으며, 이로 인해 빈번히 재수복을 하게 된다. 이차 우식은 항우식 작용이 있는 불소를 함유한 수복물을 사용하여 예방될 수 있다. 구강내에서 불소를 유리하는 것으로 알려진 글라스 아이오노머 수복재는 불소를 장기간 유리할 뿐 아니라 불소의 재충전 및 재유리 능력이 있어 불소의 저장소 역할을 할 수 있다. 따라서 본 연구는 통상의 글라스 아이오노머와 고점도 글라스 아이오노머 및 복합 레진을 대상으로 불소의 유리 양상과 불소도포를 통한 재흡수 후 유리 양상을 알아봄으로써 기존의 수복재와 새로운 수복재간의 임상적 유용성을 평가할 목적으로 시행하였다. 4종의 수복재를 대상으로 불소 유리량 및 2% NaF로 재충전 후 불소 유리량을 각각 측정하여 다음과 같은 결과를 얻었다. 1. 실험 대상의 모든 글라스 아이오노머 수복재는 초기에 다량의 불소를 유리하고 이후 점차 감소하는 경향을 보였다. 2. 2% NaF 용액을 통한 재충전 후의 유리량은 Fuji IX, Ketac Fil, Ketac Molar, Z-100의 순으로 나타났다. 3. Fuji IX을 제외한 모든 실험 대상의 수복재에서 수분의 영향으로 표면 경도는 유의하게 감소하였고 불소 재충전 후 유리량은 수분 흡수와 비례하였다(P<0.05). 4. Fuji IX이 초기 유리량에 비해 재충전 후 더 많은 불소를 유리였다(P<0.05).

Abstract

The replacement of dental restorations due to secondary caries is a continuing problem in restorative dentistry. The secondary caries can be partly prevented by using fluoride containing dental materials such as glass ionomer cement, which releases and be recharged with fluoride ion acting as a fluoride reservoir. For the purpose of investigating the behaviors of fluoride release and recharge of conventional and high viscosity glass ionomer cements, the experiment was performed on the seven specimens each from 4 kinds of materials ; 1 kind of conventional glass ionomer cement, 2 kinds of high viscosity glass ionomer cements and 1 kind of composite resin. The amount of fluoride release was measured over 7 days with pH/ion meter and fluoride specific electrode. After measuring daily fluoride release, the specimens were recharged with 2% NaF solutions for 4 minutes and measured for 3 days with recharging repeated two consecutive times. The results were as follows : 1. Significantly more fluoride was released at first day after recharge in all materials except Z-100. 2. High viscosity glass ionomer cements released more or nearly equal amount of fluoride after recharge compared with the initial release(P<0.05). 3. The fluoride release after recharge with 2% NaF solution was in order of Fuji IX, Ketac Fil, Ketac Molar, Z-100.

참고문헌 (29)

  1. "Secondary caries", 42, pp.127~138 (1992)
  2. "Placement and replacement of restorations in a military population", 57, pp.227~231 (1991)
  3. "Artificially formed carieslike lesions around restorative materials", 118, pp.193~197 (1989)
  4. "Compressive strength,fluoride release and recharge of fluoride-releasing materials", 24, pp.2451~2461 (2003)
  5. "Nature and role of loosely bound fluoride in dental caries", 69, pp.601~605 (1990)
  6. "Physicochemical perspective on the cariostatic mechanism of systemic and topical fluorides", 69, pp.606~613 (1990)
  7. "In vitro studies on the effect of fluoride on de- and remineralization", 69, pp.614~619 (1990)
  8. "Dependence of in vitro demineralization of apatite and remineralization of dental enamel on fluorideconcentration", 69, pp.620~625 (1990)
  9. "Fluoride release and uptake characteristics of aesthetic restorative materials", 29, pp.791~798 (2002)
  10. "Fluoride release and uptake capacities of fluoride-releasing restorative materials", 28, pp.395~402 (2003)
  11. "The atraumatic restorative treatment (ART) technique:does it have a place in everyday practice", pp.118 122~120 123 (2000)
  12. "The developement of glass ionomer cement", 4, pp.401~412 (1977)
  13. "Secondary caries formation in vitro around glass ionomer restorations", 17, pp.527~532 (1986)
  14. "Enamel and cementum fluoride uptake from a glass ionomer cement", 18, pp.250~257 (1984)
  15. "The effect of fluoride application on fluoride release and the antibacterial action of glass ionomers", 72, pp.1310~1314 (1993)
  16. "Review of fluoride research since 1959", 44, pp.985~992 (1999)
  17. "Composition and characteristics of glass ionomer cements", 120, pp.20~22 (1990)
  18. "A fluoride release-adsorption-release system applied to fluoride-releasing restorative materials", 27, pp.635~638 (1996)
  19. "Glass ionomer materials as a rechargeable fluoride-release system", 7, pp.65~73 (1997)
  20. "Fluoride release", uptake from newer glass-ionomer cements used with the ART approach, 2000, pp.13, 201~204
  21. "Short- and long-term fluoride release from glass ionomers and other fluoride-containing filling materials in vitro", 98, pp.179~185 (1990)
  22. "The uptake and release of fluoride by ion-leaching cements after exposure to toothpaste", 26, pp.591~597 (1998)
  23. "The dissolution mechanisms of silicate and glass-ionomer dental cements", 6, pp.378~82 (1985)
  24. "Effect of water on the physical properties of resin-modified glass ionomer cements", 15, pp.71~78 (1999)
  25. "Fluoride exchange from glass ionomer preventitive resin restorations", 16, pp.340~345 (1994)
  26. "Mechanism of erosion for GIC in an acidic buffer solution", 66, pp.1770~1774 (1987)
  27. "Fluoride release of different types of glass ionomer cements", 76, pp.316~ (1997)
  28. "Fluoride uptake and release by composites and glass ionomers in a high caries challenge situation", 12, pp.14~18 (1999)
  29. "Fluoride release from glass-ionomer cements in de-ionized water and artificial saliva", 6, pp.118~122 (1990)

관련 논문AI추천

이 간행물의 다른 논문 (22건)