본문 바로가기
KERD
논문KCI 등재

수종의 저장 용액에서 나노필러를 함유한 복합레진의 필러의 용출량에 관한 연구

FILLER LEACHING FROM NANOFILLER-CONTAINED COMPOSITE RESIN IN VARIOUS MEDIA

0

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류치의학

초록

본 연구는 최근 시판되고 있는 4종의 복합레진 Palfique Estelite sigma® (Tokuyama Dental Corp., Tokyo, Japan), Z-350® (3M ESPE, USA), Ceram X duo E3®, Ceram X duo D3® (Dentsply, Konstanz, Germany)이 3가지 액체 환 경에 노출될 때 시간에 따라 필러의 용출 양상이 변하는지 알아보고 이를 비교 분석하였다. 필러의 용출량을 평가하기 위해 내경 10mm, 두께 3mm인 테프론 몰드를 이용하여 시편을 제작하였다. 각각의 시편을 5ml의 0.1N NaOH 용액, 증류수, 인공타액이 담긴 폴리에틸렌 용기에 담구고 37℃ 오븐에서 보관하였다. Si, Ba의 용출량 을 알아보기 위해 ICP-AE 기기를 이용하여 0.1N NaOH 용액에 담군 시편은 2주 후에, 증류수와 인공타액에 담군 시편은 1 개월 간격으로 5회에 걸쳐 정량 분석하여 다음과 같은 결과를 얻었다. 1. 0.1N NaOH에서 필러의 용출량은 모든 시편에 대해서 유의하게 높았다 (p<.0.001). 2. 증류수에 저장하였을 때, Si 용출량은 Z-350가 가장 적고, 인공 타액에 저장하였을 때, Si 용출량은 Estelite에서 가장 적었다. 3. 저장용액에 따른 원소의 용출량에서 모두 유의한 평균차이를 보였다(p<.0.001) 4. 인공타액에 저장된 시편이 증류수에 저장된 시편보다 시간이 증가할수록 Ba와 Si의 용출량이 더 많았다. 5. 저장기간에 따른 필러의 용출량은 저장 용액 간, 재료 간에 유의한 상관관계를 보였다(p<.0001). 이상을 통해 나노필러를 함유한 복합레진이 수분환경에 노출되었을 때 필러 입자들의 지속적인 용출이 일어남을 확인할 수 있었다.

Abstract

The objective of this study was to measure the leaching of filler (Si, Ba) from nanofiller-contained composites (Palfique Estelite sigma® (Tokuyama Dental Corp., Tokyo, Japan), Z-350® (3M ESPE, USA), Ceram X duo E3®, D3® (Dentsply, Konstanz, Germany)) under different conditions. The samples used for the study of leachable components were made by insertion of the material into a circular mold, 10 mm in diameter and 3.0 mm high. Each specimen was placed in a disposable polystyrene vial containing 5 mL of distilled water, artificial saliva or 0.1N NaOH and kept in an oven at 37℃. ; water and artificial saliva - 150 days, 0.1N NaOH - 15days. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) was used to determine the amount of Si and Ba in the test solutions. 1. Filler leaching was significantly great in 0.1N NaOH among all samples(p<.0.001). 2. When samples were stored in the distilled water, Estelite showed the lowest amount of Si leaching. When samples were stored in the artificial saliva, Z-350 showed the lowest amount of Si leaching. 3. There were significant differences in filler leaching between 3 storage medias and composite resins(p<.0.001). 4. Si and Ba leaching occurred in greater proportion when samples were stored in the artificial saliva than distilled water. 5. There were significant interactions in monthly filler leaching between leaching in artificial saliva and in distilled water, as well as the interaction between storage medium and filler(p<.0001). These results indicate that a continuous filler leaching of nanofiller-contained composite resins was in storing aqueous solutions under over time.

참고문헌 (50)

  1. Proffit WR, "Occlusal forces in normal- and long-face adults", J Dent Res, 62, pp.566~570 (1983)
  2. Fields HW, "Variables affecting measurements of vertical occlusal force", J Dent Res, 65, pp.135~138 (1986)
  3. Leinfelder KF, "Clinical evaluation of composite resins as anterior and posterior restorative materials", J Prosthet Dent, 33, pp.407~416 (1975)
  4. 양규호, "광중합형 복합레진의 화학적 분해와 마모에 관한 연구", 대한소아치과학회지, 34(2), pp.273~284 (2007), 대한소아치과학회
  5. Mjor IA, "Placement and replacement of restorations", Oper Dent, 6, pp.49~54 (1981)
  6. Qvist V, "Restorative treatment pattern and longevity of resin restorations in Denmark", Acta Odontol Scand, 44, pp.351~356 (1986)
  7. Ferracane JL, "In vivo evaluation of composite resins. Structure-property relationships. Deve lopment of assessment criteria", Trans Acad Dent Mater, 2, pp.6~35 (1989)
  8. Oysaed H, "Composites for use in posterior teeth: mechanical properties tested under dry and wet conditions", J Biomed Mater Res, 20, pp.261~271 (1986)
  9. Calais JG, "Influence of filler type and water exposure on flexural strength of experimental composite resins", J Dent Res, 67, pp.836~840 (1988)
  10. Mohsen NM, "Hydrolytic stability of silanated zirconia-silica-urethane dimethacylate composites", J Oral Rehabil, 22, pp.213~220 (1995)
  11. S¨oderholm KJ, "Degradation of glass filler in experimental composites", J Dent Res, 60, pp.1867~1875 (1981)
  12. de Gee AJ, "Annealing as a mechanism of increasing wear resistance of composites", Dent Mater, 6, pp.266~270 (1990)
  13. S¨oderholm KJ, "Leaking of fillers in dental composites", J Dent Res, 62, pp.126~130 (1983)
  14. Ferracane JL, "Elution of leachable components from composites", J Oral Rehabil, 21, pp.441~452 (1994)
  15. Peumans M, "The influence of direct composite additions for the correction of tooth form and", or position on periodontal health. A retrospective study, 1998, pp.69, 422~427
  16. So¨derholm KJ, "Hydrolytic degradation of dental composites", J Dent Res, 63, pp.1248~1254 (1984)
  17. Ferracane JL, "Fracture toughness of experimental dental composites aged in ethanol", J Dent Res, 74, pp.1418~1423 (1995)
  18. McKinney JE, "Chemical softening and wear of dental composites", J Dent Res, 64, pp.1326~1331 (1985)
  19. Krishna VK, "Aging studies of a radiopaque light-cured dental composite in food stimulating liquids", J Appl Polym Sci, 69, pp.1153~1158 (1998)
  20. Sarkar NK, "Simulation of vivo degradation of dental composites", J Mater Sci Lett, 18, pp.1749~1752 (1999)
  21. Sarkar NK, "Internal corrosion in dental composite wear", J Biomed Mater Res, 53, pp.371~380 (2000)
  22. S¨oderholm KJ, "Filler leachability of composites stored in distilled water or artificial saliva", J Dent Res, 75, pp.1692~1699 (1996)
  23. Darvell BW, "The development of an artificial saliva for in vitro amalgam corrosion studies", J Oral Rehabil, 5, pp.41~49 (1978)
  24. Wu W, "A silver staining technique for investigating wear of restorative dental composites", J Biomed Mater res, 15, pp.343~348 (1981)
  25. Bapna MS, "Relative solubilities of hybrid ionomer and compomers by acid impingement", J Oral Rehabil, 26, pp.786~790
  26. Kalachandra S, "Influence of fillers on the water sorption of composites", Dent Mater, 5, pp.283~288 (1989)
  27. Kalachandra S, "Water sorption and mechanical properties of light-cured proprietary composite restorative materials", Biomaterials, 13, pp.105~109 (1992)
  28. Wu W, "Subsurface damage layer of in vivo worn dental composite restorations", J Dent Res, 63, pp.675~680 (1984)
  29. Mair LH, "Staining of in vivo subsurface degradation in dental composites with silver nitrate", J Dent Tes, 70, pp.215~220 (1991)
  30. Larsen IB, "Effect of human saliva on surface degradation of composite resins", Scand J Dent Res, 99, pp.254~261 (1991)
  31. Munksgaard EC, "Enzymatic hydrolysis of (di) methacrylates and their polymers", Scand J Dent Res, 98, pp.261~267 (1990)
  32. Braden M, "Water absorption characteristics of den tal microfine composite filling materials. II Experimental materials", Biomaterials, 5, pp.373~375 (1984)
  33. O¨rtengren U, "Sorption, solubility and identification of substances released from composite materials in an aqueous environment", J Oral Rehab (Accepted for publication) (2000)
  34. Roulet JF, , Swizerland:Krager, pp.161~214
  35. Zui S, "A study of visible light-cured composite resins-mechanical properties", J Soc Dent Mat Dev, 5, pp.601~615 (1986)
  36. Pilliar RM, "The effect of enviornmental aging on the fracture toughness of dental composites", J Dent Res, 66, pp.722~726 (1987)
  37. Ferracane JL, "Properties of heat-treated composites after aging in water", Dent Mater, 11, pp.354~358 (1995)
  38. de Gee AJ, "Influence of enzymes and plaque acids on in vitro wear of dental composites", Biomaterials, 17, pp.1327~1332 (1996)
  39. Kondo S, "Environmental durability of composite resins in acidic and alkaline solutions", J Dent Res, 68, pp.447~992 (1989)
  40. Ferracane JL, "Rate of elution of leachable components from composite", Dent Mater, 6, pp.282~287 (1990)
  41. Karabela MM, "Effect of the structure of silane coupling agent on sorption characteristics of solvents by dental resin-nanocomposites", Dent Mater, 24, pp.1631~1639 (2008)
  42. Xia Y, "Nanoparticle-reinforced resin-based dental composites", J Dent, 36, pp.450~455 (2008)
  43. Rodrigues SA Jr, "Microstructural characterization and fracture behavior of a microhybrid and a nanofill composite", Dent Mater, 24, pp.1281~1288 (2008)
  44. Yesil ZD, "Evaluation of the wear resistance of new nanocomposite resin restorative materials", J Prosthet Dent, 99, pp.435~443 (2008)
  45. Ernst CP, "Twoyear clinical performance of a nanofiller vs a fineparticle hybrid resin composite", Clin Oral Investig, 10, pp.119~125 (2006)
  46. Sarkar NK, "Hydrolytic degradation of dental composites", J Dent Res spec, #855 (1996)
  47. Yap AU, "Comparative wear ranking of dental restoratives with the BIOMAT wear simulator", J Oral Rehabil, 26, pp.228~235 (1999)
  48. 박미란, "콤퍼머의 NaOH 용액 내에서의 화학적 분해", 대한소아치과학회지, 31(2), pp.144~152 (2004), 대한소아치과학회
  49. S¨oderholm KJ, "Filler particle leachability of experimental dental composites", Eur J Oral Sci, 108, pp.555~560 (2000)
  50. Charles RJ, "Static fatigue of glass I", J Appl Phys, 29, pp.1549~1553 (1958)

관련 논문AI추천

이 간행물의 다른 논문 (22건)