Enhanced electrochemical performance of Li3PO4 coated LiNi0.8Co0.1Mn0.1O2 cathode materials for high-energy Li-ion batteries
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we successfully synthesized the Li3PO4 coated Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode and investigatedelectrochemical performances and structure morphology for high-energy lithium-ion battery. The Li3PO4 coated Ni-richLiNi0.8Co0.1Mn0.1O2 shows superior cation mixing and there is no significant change in morphology compared to the pristineNCM. In particular, the Li3PO4 coated Ni-rich LiNi0.8Co0.1Mn0.1O2 exhibits an improved rate capability of 176.5 mAh g^-1 at4.0 C and cyclability of 80.2% (after 80 cycles). Therefore, the Li3PO4 coated Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode can bedeemed as an effective method for next-generation Li-ion batteries.
Abstract
In this paper, we successfully synthesized the Li3PO4 coated Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode and investigatedelectrochemical performances and structure morphology for high-energy lithium-ion battery. The Li3PO4 coated Ni-richLiNi0.8Co0.1Mn0.1O2 shows superior cation mixing and there is no significant change in morphology compared to the pristineNCM. In particular, the Li3PO4 coated Ni-rich LiNi0.8Co0.1Mn0.1O2 exhibits an improved rate capability of 176.5 mAh g^-1 at4.0 C and cyclability of 80.2% (after 80 cycles). Therefore, the Li3PO4 coated Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode can bedeemed as an effective method for next-generation Li-ion batteries.
참고문헌 (24)
- S. K. Jung, , Adv. Energy Mater, 4(1), pp.1300787~ (2014)
- W. S. Cho, , Electrochim. Acta, 198, pp.77~83 (2016)
- C. C. Qin, , Dalton Trans, 45(23), pp.9669~9675 (2016)
- Y. Mo, , J. Power Sources, 448, pp.227439~ (2020)
- F. Lin, , Nat. Commun, 5(1), pp.1~9 (2014)
- M.S. Rad, , Chem. Mater, 15(22), pp.4280~4286 (2003)
- S. H. Lee, , J. Alloys Compd, 791, pp.193~199 (2019)
- S. J. Sim, , Sci. Rep, 9(1), pp.8952~ (2019)
- S. Sharifi?Asl, , Adv. Energy Mater, 9(22), pp.1900551~ (2019)
- R. Jung, , J. Electrochem. Soc, 165(11), pp.A2869~A2879 (2018)
- J. Zhu, , J. Alloys Compd, 773, pp.112~120 (2019)
- H. Lee, , J. Electrochem. Soc, 153(4), pp.A781~A786 (2006)
- J. Kim, , J. Electrochem. Soc, 152(6), pp.A1142~A1148 (2005)
- W. Cho, , Electrochim. Acta, 198, pp.77~83 (2016)
- S. H. Lee, , Sci. Rep, 9(1), pp.17541~ (2019)
- Y. W. Tsai, , Chem. Mater, 17(12), pp.3191~3199 (2005)
- J. Yang, , J. Electrochem. Soc, 163, pp.2665~2672 (2016)
- C. Qin, , Dalton Trans, 45(23), pp.9669~9675 (2016)
- S. Chen, , ACS Appl. Mater. Interfaces, 9(35), pp.29732~29743 (2017)
- Z. Tang, , J. Alloys Compd, 693, pp.1157~1163 (2017)
- S. H. Lee, , Mater. Lett, 270, pp.127615~ (2020)
- S. J. Sim, , Sci. Rep, 10, pp.11114~ (2020)
- P. Yan, , Nature Energy, 3(7), pp.600~605 (2018)
- 석정원, "Effect of LiPO2F2 Electrolyte Additive on Surface Electrical Properties of LiNi0.6Co0.2Mn0.2O2 Cathode", Transactions on Electrical and Electronic Materials, 20(6), pp.548~553 (2019), 한국전기전자재료학회[DOI]