축열건축자재 적용을 위한 Hexadecane/xGnP SSPCM 제조 및 열적특성
Preparation and Thermal Characteristics of Hexadecane/xGnP Shape-stabilized Phase Change Material for Thermal Storage Building Materials
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Hexadecane and exfoliated graphite nanoplate (xGnP)composite was prepared as a shape-stabilized phase change material (SSPCM) in a vacuum to develope thermal energy storage. The Hexadecane as an organic phase change material (PCM) is very stable against phase separation of PCM and has a melting point at 18℃ that is under the thermally comfortable temperature range in buildings. The xGnP is a porous carbon nanotube material with high thermal conductivity. Scanning electron microscope (SEM) and Fourier transformation infrared spectrophotometer (FT-IR)were used to confirm the chemical and physical stability of Hexadecane/xGnP SSPCM. In addition, thermal properties were determined by Deferential scanning calorimeter(DSC) and Thermogravimetric analysis (TGA). The specific heat of Hexadecane/xGnPSSPCM was $10.0J/g{\cdot}K$ at $21.8^{\circ}C$. The melting temperature range of melting and freezing were found to be $16-25^{\circ}C$ and $17-12^{\circ}C$. At this time, the laten heats of melting and freezing were 96.4J/g and 94.8J/g. The Hexadecane was impregnated into xGnP as much about 48.8% of Hexadecane/xGnP SSPCM's mass fraction.
Abstract
Hexadecane and exfoliated graphite nanoplate (xGnP)composite was prepared as a shape-stabilized phase change material (SSPCM) in a vacuum to develope thermal energy storage. The Hexadecane as an organic phase change material (PCM) is very stable against phase separation of PCM and has a melting point at 18℃ that is under the thermally comfortable temperature range in buildings. The xGnP is a porous carbon nanotube material with high thermal conductivity. Scanning electron microscope (SEM) and Fourier transformation infrared spectrophotometer (FT-IR)were used to confirm the chemical and physical stability of Hexadecane/xGnP SSPCM. In addition, thermal properties were determined by Deferential scanning calorimeter(DSC) and Thermogravimetric analysis (TGA). The specific heat of Hexadecane/xGnPSSPCM was $10.0J/g{\cdot}K$ at $21.8^{\circ}C$. The melting temperature range of melting and freezing were found to be $16-25^{\circ}C$ and $17-12^{\circ}C$. At this time, the laten heats of melting and freezing were 96.4J/g and 94.8J/g. The Hexadecane was impregnated into xGnP as much about 48.8% of Hexadecane/xGnP SSPCM's mass fraction.
참고문헌 (13)
- Sarlos G., "Energy a Challenge for Humanity in the 21st Century", International Conference on Energy and the Environment, pp.1~5 (2003)
- Medrano M., "State of the Art on High Temperature Thermal Energy Storage for Power Generation", Part 1–Case Studies, Renewable & Sustainable Energy Reviews, 14, pp.56~72 (2010)
- Hadjieva M., "Thermo Physical Properties of Some Paraffins Applicable to Thermal Energy Storage", Solar Energy Materials and Solar Cells, 27, pp.181~187 (1992)
- Rozanna D., "A Study on Thermal Characteristics of Phase Change Material in Gypsum Board for Building Application", Journal of Oil Palm Research, 17, pp.41~46 (2005)
- Farid M.M., "A Review on Phase Change Energy Storage Materials and Applications", Energy Conversion and Management, 45, pp.1597~1615 (2004)
- Hasnain S.M., "Review on Sustainable Thermal Energy Storage Technologies Part 1: Heat Storage Materials and Techniques", Energy Conversion and Management, 39, pp.1127~1138 (1998)
- Hawlader M.N.A., "Microencapsulated PCM Thermal Energy Storage System", Applied Energy, 74, pp.195~202 (2003)
- O¨zonur Y., "Microencapsulation of Coco Fatty Acid Mixture for Thermal Energy Storage with Phase Change Material", International Journal of Energy Research, 30, pp.741~749 (2006)
- Seo J., "Thermal Performance Analysis According to Wood Flooring Structure for Energy Conservation in Radiant Floor Heating Systems", Energy and Buildings, 43, pp.2039~2042 (2001)
- Lee J., "The Determination of the Adsorption Performance of Graphite for VOCs and Formaldehyde", Energy and Buildings, 46, pp.56~61 (2011)
- SIGMA-ALDRICH, "2012-2014 Handbook of Fine Chemicals", ~ (2011)
- Zhang D., "Granular Phase Changing Composites for Thermal Energy Storage", Solar Energy, 78, pp.471~480 (2005)
- Karaipekli A., "Thermal Characteristics of Paraffin", Expanded Perlite Composite for Latent Heat Thermal Energy Storage, 2009, pp.31, 814~823