Photo-catalysis of phenol derivatives with Fe2O3 nanoparticles dispersed on SBA-15
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Highly ordered hexagonal (p6mm) mesoporous silica SBA-15 was synthesized through a hydrothermal treatment under acidic conditions. Fe2O3/SBA-15 catalysts were prepared by impregnation of SBA-15 media with iron(III) acetylacetonate, iron(III) chloride or iron(II) sulfate solutions. X-ray Diffraction (XRD), X-ray fluorescence (XRF), high angle annular dark field scanning transmission electron microscopy (HAADF-STEM), energy dispersive X-ray (EDX) spectroscopy and nitrogen physisorption characterization were carried out for SBA-15 and Fe2O3/SBA-15 materials. After impregnation and calcination at 823 K, the iron oxide dispersion in SBA-15 was analyzed by STEM and EDX. FeCl3 provides the highest amount of Fe loading in mesoporous SBA-15. The photocatalytic properties of Fe2O3/SBA-15 samples at pH = 3 and pH = 6 were evaluated in catechol and hydroquinone photodecomposition by inducing visible radiation. The conversion of catechol and hydroquinone, at pH = 3 and pH = 6 with iron(III) acetylacetonate and FeCl3 as the precursor of iron oxide nanoparticles, were measured by UV-Vis spectroscopy, chemical oxygen demand (COD) and total organic carbon (TOC) analysis.
Abstract
Highly ordered hexagonal (p6mm) mesoporous silica SBA-15 was synthesized through a hydrothermal treatment under acidic conditions. Fe2O3/SBA-15 catalysts were prepared by impregnation of SBA-15 media with iron(III) acetylacetonate, iron(III) chloride or iron(II) sulfate solutions. X-ray Diffraction (XRD), X-ray fluorescence (XRF), high angle annular dark field scanning transmission electron microscopy (HAADF-STEM), energy dispersive X-ray (EDX) spectroscopy and nitrogen physisorption characterization were carried out for SBA-15 and Fe2O3/SBA-15 materials. After impregnation and calcination at 823 K, the iron oxide dispersion in SBA-15 was analyzed by STEM and EDX. FeCl3 provides the highest amount of Fe loading in mesoporous SBA-15. The photocatalytic properties of Fe2O3/SBA-15 samples at pH = 3 and pH = 6 were evaluated in catechol and hydroquinone photodecomposition by inducing visible radiation. The conversion of catechol and hydroquinone, at pH = 3 and pH = 6 with iron(III) acetylacetonate and FeCl3 as the precursor of iron oxide nanoparticles, were measured by UV-Vis spectroscopy, chemical oxygen demand (COD) and total organic carbon (TOC) analysis.
참고문헌 (14)
- Ch. Yang, , Chem. Mater, 17, pp.3205~3211 (2007)
- S. Lee, , Chemistry of Materials, 18(24), pp.5631~5633 (2006)
- X.Q. Wang, , Microporous and Mesoporous Materials, 86, pp.335~340 (2005)
- T. Tsoncheva, , Microporous and Mesoporous Materials, 89, pp.209~218 (2006)
- Ch. Li, , Chem. Mater, 19, pp.173~178 (2007)
- R. Zhang, , Chemistry of Materials, 19(18), pp.4379~4381 (2007)
- Z. Wang, , Chem. Mater, 19, pp.3286~3293 (2007)
- M. Rodríguez, , Solar Energy, 79, pp.360~368 (2005)
- M-Ch. Lu, , Chemosphere, 40, pp.125~130 (2000)
- D. Wang, , Applied Catalysis A: General, 174, pp.25~32 (1998)
- F. Martínez, , Applied Catalysis B: Environmental, 60, pp.181~190 (2005)
- F. Martínez, , Applied Catalysis B: Environmental, 70, pp.452~460 (2007)
- D. Zhao, , J. Am. Chem. Soc, 120, pp.6024~6036 (1998)
- R. Suárez Parra, , Solar Energy Materials & Solar Cells, 76, pp.189~199 (2003)