Enhancement of NOx photo-oxidation by Fe-doped TiO2 nanoparticles
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Microwave hydrothermal-assisted sol-gel method was employed to synthesize the Fe doped TiO2 photocatalyst. Themorphological analysis suggests anatase phase nanoparticles of ~20 nm with an SBET area of 283.99 m2/g. The doping of Feions in TiO2 created oxygen vacancies and Ti3+ species as revealed through the XPS analysis. The reduction of the band gap(3.1 to 2.8 eV) is occurred by doping effect. The as-prepared photocatalyst was applied for removal of NOx under solar lightirradiation. The doping of Fe in TiO2 facilitates 75 % of NOx oxidation efficiency which is more than two-fold enhancementthan the TiO2 photocatalyst. The possible reason of enhancement is associated with high surface area, oxygen vacancy, andreduction of the band gap. Also, the low production of toxic intermediates, NO2 gas, is further confirmed by Combustion IonChromatography. The mechanism related NOx oxidation by the doped photocatalyst is explained in this study.
Abstract
Microwave hydrothermal-assisted sol-gel method was employed to synthesize the Fe doped TiO2 photocatalyst. Themorphological analysis suggests anatase phase nanoparticles of ~20 nm with an SBET area of 283.99 m2/g. The doping of Feions in TiO2 created oxygen vacancies and Ti3+ species as revealed through the XPS analysis. The reduction of the band gap(3.1 to 2.8 eV) is occurred by doping effect. The as-prepared photocatalyst was applied for removal of NOx under solar lightirradiation. The doping of Fe in TiO2 facilitates 75 % of NOx oxidation efficiency which is more than two-fold enhancementthan the TiO2 photocatalyst. The possible reason of enhancement is associated with high surface area, oxygen vacancy, andreduction of the band gap. Also, the low production of toxic intermediates, NO2 gas, is further confirmed by Combustion IonChromatography. The mechanism related NOx oxidation by the doped photocatalyst is explained in this study.
참고문헌 (36)
- Nitrogen oxides (NOx), why and how they are controlled, "Environmental Protection Agency (EPA)", 48~, pp.Epa-456 (1999), F-99-006R
- J. Lasek, "Removal of NOx by photocatalytic processes", J. Photochem. Photobiol. C Photochem. Rev, 14, pp.29~52 (2013)
- J.J. Kaczur, "Oxidation chemistry of chloric acid in NOx", SOx and air toxic metal removal from gas streams, 1996, pp.15, 245~254
- U.S. Environmental Protection Agency, , Nitrogen Oxides Emissions, pp.23~ (2014)
- M. S. Solanki, "Adv. Oxid. Process. Waste Water Treat", pp.135~175 (2018)
- D. Ravelli, "Photocatalysis. A multi-faceted concept for green chemistry", Chem. Soc. Rev, 38, pp.1999~2011 (2009)
- T. Luttrell, "Why is anatase a better photocatalyst than rutile? - Model studies on epitaxial TiO2 films", Sci. Rep, 4, pp.4043~ (2015)
- A. Fujishima, "Titanium dioxide photocatalysis", J. Photochem. Photobiol. C Photochem. Rev, 1, pp.1~21 (2000)
- L. M. S. George, "Role of Fe doping in tuning the band gap energy of titanium dioxide for studying the light activated cytotoxicity", J. Am. Chem. Soc, 133, pp.11270~11278 (2011)
- R. Jaiswal, "Copper and Nitrogen co-doped TiO2 photocatalyst with enhanced optical absorption and catalytic activity", Appl. Catal. B Environ, 168(169), pp.333~341 (2015)
- M. B. Suwarnkar, "Enhanced photocatalytic activity of Ag doped TiO2 nanoparticles synthesized by a microwave assisted method", Ceram. Int, 40, pp.5489~5496 (2014)
- Y. -H. Peng, "Visible-light absorption and photocatalytic activity of Cr-doped TiO2 nanocrystal films", Adv. Powder Technol, 23, pp.8~12 (2012)
- Q. R. Deng, "Mn-doped TiO2 nanopowders with remarkable visible light photocatalytic activity", Mater. Lett, 65, pp.2051~2054 (2011)
- I. Ganesh, "Preparation and characterization of Cu-doped TiO2 materials for electrochemical, photoelectrochemical, and photocatalytic applications", Appl. Surf. Sci, 293, pp.229~247 (2014)
- R. Ribeiro, "Band-Gap Engineering for Photocatalytic Applications: Anionic and Cationic Doping of TiO2 Anatase", Curr. Phys. Chem, 6, pp.22~27 (2016)
- Y. Zhang, "Synthesis and characterization of Fe-doped TiO2 films by electrophoretic method and its photocatalytic activity toward methyl orange", Solid State Sci, 16, pp.16~20 (2013)
- Nguyen Huy Hao, "Rapid synthesis of TiO2 nanotubes via microwave-assisted hydrothermal method", Journal of Ceramic Processing Research, 17(5), pp.409~413 (2016), 청정에너지연구소[DOI]
- Samroeng Narakaew, "The nano-TiO2 synthesis using ultrasonic assisted sol-gel method and its photocatalytic degradation of methylene blue", Journal of Ceramic Processing Research, 18(1), pp.36~40 (2017), 청정에너지연구소[DOI]
- A. Monshi, "Modified Scherrer Equation to Estimate More Accurately Nano-Crystallite Size Using XRD", World J. Nano Sci. Eng, 02, pp.154~160 (2012)
- M. Hinojosa-Reyes, "Gold nanoparticles supported on TiO2 -Ni as catalysts for hydrogen purification via water-gas shift reaction", RSC Adv, 4, pp.4308~4316 (2014)
- Y. Yang, "Doping and transformation mechanisms of Fe3+ ions in Fe-doped TiO 2, CrystEngComm", CrystEngComm, 19, pp.1100~1105 (2017)
- B. I. Kidyarov, "Kinetics of non-stationary nucleation in solutions,", J. Cryst. Growth, 52, pp.812~815 (1981)
- A. Chianese, "On the effect of secondary nucleation on the crystal size distribution from a seeded batch crystallizer", Chem. Eng. Sci, 48, pp.551~560 (1993)
- M. Thommes, "Physical adsorption characterization of nanoporous materials", Chemie-Ingenieur-Technik, 82, pp.1059~1073 (2010)
- B. Viswanathan, "Effect of surface area, pore volume and particle size of P25 titania on the phase transformation of anatase to rutile", Indian J. Chem. - Sect. A Inorganic, Phys. Theor. Anal. Chem, 48, pp.1378~1382 (2009)
- Y. Duan, "Sn-doped TiO2 photoanode for dye-sensitized solar cells", J. Phys. Chem. C, 116, pp.8888~8893 (2012)
- X. Jiang, "Characterization of Oxygen Vacancies Associates within the Hydrogenated TiO2 : a Positron Annihilation Study Characterization of Oxygen Vacancies Associates within the Hydrogenated TiO2 : a Positron Annihilation Study", J. Phys. Chem. C, 116, pp.22619~22624 (2012)
- P. Li, "Fabrication of ultrathin epitaxial γ-Fe2O3 films by reactive sputtering", J. Phys. D. Appl. Phys, 44, pp.075003~ (2011)
- T. Ohsaka, "Raman spectrum of anatase, TiO2", J. Raman Spectrosc, 7, pp.321~324 (1978)
- A. Das, "Monitoring dopants by Raman scattering in an electrochemically top-gated graphene transistor", Nat. Nanotechnol, 3, pp.210~215 (2008)
- N. Serpone, "Is the Band Gap of Pristine TiO2 Narrowed by Anion- and Cation-Doping of Titanium Dioxide in Second-Generation Photocatalysts?", J. Phys. Chem. B, 110, pp.24287~24293 (2006)
- C. H. Wu, "Effects of operational parameters on the decolorization of C.I. Reactive Red 198 in UV", TiO2-based systems, 2008, pp.77, 31~38
- A. G. Thomas, "Resonant photoemission of anatase TiO2 (101) and (001) single crystals", Phys. Rev. B, 67, pp.035110~ (2003)
- J. . Dalton, "Photocatalytic oxidation of NOx gases using TiO2: a surface spectroscopic approach", Environ. Pollut, 120, pp.415~422 (2002)
- J. Ma, "Photocatalytic Removal of NOx over Visible Light Responsive Oxygen-Deficient TiO2", J. Phys. Chem. C, 118, pp.7434~7441 (2014)
- H. Wang, "Photocatalytic oxidation of nitrogen oxides using TiO2 loading on woven glass fabric", Chemosphere, 66, pp.185~190 (2007)
