High-frequency induction heated sintering of nanostructured WC and WC-TiAl3 hard materials their mechanical properties
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Tungsten carbides are primarily used as cutting tools and abrasive materials in the form of composites with a binder metal,such as Co or Ni. However, these binder phases have low corrosion resistance compared to the carbide phase and the high costof Ni or Co. Therefore, the drawbacks of the WC-Ni and WC-Co cermets have generated interest in recent years foralternative binder phases. In this study, TiAl3 was used as a novel binder and consolidated by the high-frequency inductionheated sintering (HFIHS) method. The advantage of this process is not only rapid densification to near theoretical density butalso the prohibition of grain growth in nano-structured materials. Highly dense WC-TiAl3 with a relative density of up to98% was obtained within one min by HFIHS under a pressure of 80 MPa. The microstructure and the mechanical properties(hardness and fracture toughness) of the sintered WC and WC-TiAl3 were investigated.
Abstract
Tungsten carbides are primarily used as cutting tools and abrasive materials in the form of composites with a binder metal,such as Co or Ni. However, these binder phases have low corrosion resistance compared to the carbide phase and the high costof Ni or Co. Therefore, the drawbacks of the WC-Ni and WC-Co cermets have generated interest in recent years foralternative binder phases. In this study, TiAl3 was used as a novel binder and consolidated by the high-frequency inductionheated sintering (HFIHS) method. The advantage of this process is not only rapid densification to near theoretical density butalso the prohibition of grain growth in nano-structured materials. Highly dense WC-TiAl3 with a relative density of up to98% was obtained within one min by HFIHS under a pressure of 80 MPa. The microstructure and the mechanical properties(hardness and fracture toughness) of the sintered WC and WC-TiAl3 were investigated.
참고문헌 (31)
- Hwan-Cheol Kim, "Rapid Sintering of Ultra Fine WC and WC-Co Hard Materials by High-Frequency Induction Heated Sintering and Their Mechanical Properties", Metals and Materials International, 13(1), pp.39~45 (2007), 대한금속·재료학회
- H. Suzuki, "Cemented Carbide and Sintered Hard Materials", pp.262~268 (1986), Maruzen
- S. Imasato, , Int J of Refract Met and Hard Mater, 13, pp.305~312 (1995)
- G. Gille, , Int J of Refract Met and Hard Mater, 18(2-3), pp.87~102 (2000)
- Hua Lin, , Int. Journal of Refractory Metals and Hard Materials, 41, pp.363~365 (2013)
- Z. G. Zhang, , Corrosion Science, 48, pp.741~765 (2006)
- H Gleiter, "Nanocrystalline materials", Progress in Materials Science, 33(4), pp.223~315 (1989)
- GE Fougere, , Scripta Metallurgica et Materialia, 26(2), pp.1879~1883 (1992)
- M. Sherif El-Eskandarany, , J. Alloys & Compounds, 305, pp.225~238 (2000)
- L Fu, , Scripta Materialia, 44, pp.1061~1068 (2001)
- Z. Fang, , Int. J. Refract. Met. Hard Mater, 13, pp.297~303 (1995)
- A. I. Y. Tok, , Mater. Sci. Eng. A, 383, pp.229~234 (2004)
- 손인진, "Mechanochemical Synthesis and Rapid Consolidation of Binderless Nanostructured (Ti,V)C by Pulsed Current Activated Heating and Its Mechanical Properties", 대한금속·재료학회지, 52(5), pp.343~346 (2014), 대한금속·재료학회
- 손인진, "나노구조 TiC-FeAl 초경재료의 기계적 성질", 대한금속·재료학회지, 53(7), pp.474~479 (2015), 대한금속·재료학회[DOI]
- 권소망, "나노구조의 Ti-TiC 복합재료 소결 및 기계적 성질", 대한금속·재료학회지, 53(8), pp.555~562 (2015), 대한금속·재료학회[DOI]
- 강보람, "Mechanical Properties and Rapid Low-temperature Consolidation of Nanocrystalline Cu-ZrO2 Composites by Pulsed Current Activated Heating", Metals and Materials International, 21(4), pp.698~703 (2015), 대한금속·재료학회[DOI]
- 강보람, "펄스전류활성 가열에 의한 나노구조의 4Cr-3ZrO2 복합재료 급속소결과 특성", 대한금속·재료학회지, 53(5), pp.320~325 (2015), 대한금속·재료학회[DOI]
- 강현수, "나노구조 (Mo,W)Si2 급속소결과 기계적 특성", 대한금속·재료학회지, 52(8), pp.623~629 (2014), 대한금속·재료학회
- J. Jung, , Scripta Mater, 56, pp.561~564 (2007)
- 곽봉원, "Enhanced mechanical properties of nanostructured TiSi2-NbSi2 composite rapidly sintered by pulsed current activated heating", Journal of Ceramic Processing Research, 16(3), pp.340~345 (2015), 세라믹공정연구센터[DOI]
- 강현수, "Simultaneously Rapid Synthesis and Consolidation of Nanostructured Mg0.3Al1.4Ti1.3O5 by High-Frequency Induction Heating", Electronic Materials Letters, 10(3), pp.529~533 (2014), 대한금속·재료학회[DOI]
- 손인진, "펄스전류 활성 소결에 관한 연구", 대한금속·재료학회지, 52(8), pp.573~580 (2014), 대한금속·재료학회
- Suryanarayana C., "X-ray Diffraction A Practical Approach" (1998), Plenum Press
- 손인진, "Pulsed Current Activated Synthesis and Rapid Consolidation of a Nanostructured Mg2Al4Si5O18 and Its Mechanical Properties", Metals and Materials International, 21(2), pp.345~349 (2015), 대한금속·재료학회[DOI]
- 손인진, "Effect of Milling on Properties and Consolidation of AlN by High-Frequency Induction Heated Sintering", Electronic Materials Letters, 10(2), pp.337~343 (2014), 대한금속·재료학회[DOI]
- 강현수, "나노구조 MgAl2O4-Mg3Al2Si3O12 복합재료 합성과 동시 소결 및 기계적 성질", 대한금속·재료학회지, 52(10), pp.777~782 (2014), 대한금속·재료학회[DOI]
- GS Upadhyaya, , Materials & Design, 22, pp.483~489 (2001)
- Z. Shen, "Spark plasma sintering of alumina", J. Am. Ceram. Soc, 85, pp.1921~1927 (2002)
- J. E. Garay, , Appl. Phys. Lett, 85, pp.573~575 (2004)
- K. Niihara, , J. Mater. Sci. Lett, 1, pp.12~16 (1982)
- In-Jin Shon, , Ceramics International, 35, pp.339~344 (2009)