본문 바로가기
KERD
논문KCI 등재

Self-healing performance of coated slag aggregates in wheat straw ash blended cement composites

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류재료공학

초록

The cracks in the concrete structures permit the ingress of harmful ions which ultimately exacerbate the durability of the structures. In addition, the environmental concern of the cement production necessitates the utilization of pozzolanic materials. This study used wheat straw ash as cement replacement material. Sodium silicate impregnated in slag aggregate, an industrial by-product, was used as the self-healing agent. The impregnated slag aggregates were coated and used as a sand replacement. Mortar samples were analyzed for compressive strength. Self-healing performance of the mortar samples was investigated via ultrasonic pulse velocity, water permeability, and dynamic modulus of elasticity tests. The results demonstrate that the addition of coated slag aggregate significantly enhanced the self-healing performance of the mortar samples. Additionally, the incorporation of wheat straw ash resulted in an increased rate of crack filling.

Abstract

The cracks in the concrete structures permit the ingress of harmful ions which ultimately exacerbate the durability of the structures. In addition, the environmental concern of the cement production necessitates the utilization of pozzolanic materials. This study used wheat straw ash as cement replacement material. Sodium silicate impregnated in slag aggregate, an industrial by-product, was used as the self-healing agent. The impregnated slag aggregates were coated and used as a sand replacement. Mortar samples were analyzed for compressive strength. Self-healing performance of the mortar samples was investigated via ultrasonic pulse velocity, water permeability, and dynamic modulus of elasticity tests. The results demonstrate that the addition of coated slag aggregate significantly enhanced the self-healing performance of the mortar samples. Additionally, the incorporation of wheat straw ash resulted in an increased rate of crack filling.

참고문헌 (35)

  1. K. Van Tittelboom, , Materials, 6(6), pp.2182~2217 (2013)
  2. C. Ormerod, "Construction Statistics Annual", pp.34~49 (2006), Palgrave Macmillan Press
  3. M. De Rooij, "Self-Healing Phenomena in Cement-Based Materials: state-of-the-art report of RILEM technical committee 221-SHC: self-Healing phenomena in cement-Based materials", pp.9~ (2013), Springer Press
  4. H. Huang, , Mater. Des, 92, pp.499~511 (2016)
  5. V. C. Li, , J. Adv. Concr. Technol, 10(6), pp.207~218 (2012)
  6. V. Wiktor, , Cem. Concr. Compos, 33(7), pp.763~770 (2011)
  7. K. Sisomphon, , Heron, 56(1, pp.2) (2011), 13~32
  8. D.A. Morian, "Use of air-cooled blast furnace slag as coarse aggregate in concrete pavements", pp.1~15 (2012), Federal Highway Administration Press
  9. D. M. Sadek, , J. Cleaner Prod, 79, pp.134~141 (2014)
  10. İ. Yüksel, , Build. Environ, 42(7), pp.2651~2659 (2007)
  11. J. Escalante-Garcia, , Constr. Build. Mater, 23(8), pp.2851~2855 (2009)
  12. "Self-healing concrete with a microencapsulated healing agent"[URL]
  13. H. Huang, , International RILEM conference on advances in construction materials through science and engineering, pp.530~536 (2011), RILEM Publications SARL
  14. E. Mostavi, , J. Mater. Civ. Eng, 27(12), pp.04015035~ (2015)
  15. R. Alghamri, , Constr. Build. Mater, 124, pp.910~921 (2016)
  16. A. Qudoos, , Constr. Build. Mater, 193, pp.481~490 (2018)
  17. ASTM, "ASTM C150", C150M - 17, Standard Specification for Portland Cement, 2017
  18. Y.-S. Lee, "Study on crack-sealing of cement composite via encapsulating the granulated healing material, Structural engineering", pp.42~46 (2015), Hanyang University Press
  19. C. ASTM, "109. 2007, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2 in. or (50-mm) Cube Specimens)", ~ (2007)
  20. C. ASTM, "348: 02, Standard test method for flexural strength of hydraulic-cement mortars", ~ (2002)
  21. C. ASTM, "597, Standard test method for pulse velocity through concrete, ASTM International", ~ (2009)
  22. S.A. Kumar, , Proceedings of the National Seminar on Non-Destructive Evaluation (2006), NDT Press
  23. T.R. Naik, "Handbook on nondestructive testing of concrete", pp.169~188 (2004), CRC Press
  24. C. ASTM, "215: 08, Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens", ~ (2008)
  25. Y. -S. Lee, , Materials, 9(7), pp.555~ (2016)
  26. Y. -S. Lee, , Constr. Build. Mater, 71, pp.188~193 (2014)
  27. "RILEM II.4, Water Absorption Tube Test", ~ (2006)
  28. T. -H. Ahn, , Materials, 9(8), pp.654~ (2016)
  29. H. G. Kim, , Constr. Build. Mater, 188, pp.569~582 (2018)
  30. C. Edvardsen, , Mater. J, 196(4), pp.448~454 (1999)
  31. H.F. Taylor, "Cement chemistry", pp.113~125 (1997), Thomas Telford Press
  32. Ter Heide, Nynke, "Crack healing in hydrating concrete", pp.2005
  33. E. Gruyaert, , Proceedings of the 2nd International Conference on Microstructural-related Durability of Cementitious Composites, pp.1~8 (2012), RILEM Publications Press
  34. P. Termkhajornkit, , Cem. Concr. Compos, 31(3), pp.195~203 (2009)
  35. D. Jaroenratanapirom, , Proceedings of the 6th annual concrete conference, pp.551~556 (2010), University of MN Press

관련 논문AI추천

이 간행물의 다른 논문 (25건)