Microstructure and depolarization behavior of ZnO-added (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics sintered at different heating rates
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The ZnO-added (Bi0.5Na0.5)0.94Ba0.06TiO3 (denoted as BNBTZ) ceramics were prepared by means of a solid-state reaction method. The ceramics were sintered at 0.5 oC/min and 9 oC/min. Their microstructure, phase structure, piezoelectric, and dielectric properties were investigated. Both the ceramics exhibit dense microstructures. Compared to the ceramics sintered at 0.5 oC/min, those sintered at 9 oC/min have smaller grains. The X-ray diffraction (XRD) and energy-dispersive spectrum reveal that the ceramics exhibit two phases, i.e., BNBTZ phase with perovskite structure and ZnO phase. The movement of the peak position implies enlargement of the crystallite lattice due to the entrance of Zn2+ ions into the lattice. The effect of sintering rates on depolarization behavior was discussed.
Abstract
The ZnO-added (Bi0.5Na0.5)0.94Ba0.06TiO3 (denoted as BNBTZ) ceramics were prepared by means of a solid-state reaction method. The ceramics were sintered at 0.5 oC/min and 9 oC/min. Their microstructure, phase structure, piezoelectric, and dielectric properties were investigated. Both the ceramics exhibit dense microstructures. Compared to the ceramics sintered at 0.5 oC/min, those sintered at 9 oC/min have smaller grains. The X-ray diffraction (XRD) and energy-dispersive spectrum reveal that the ceramics exhibit two phases, i.e., BNBTZ phase with perovskite structure and ZnO phase. The movement of the peak position implies enlargement of the crystallite lattice due to the entrance of Zn2+ ions into the lattice. The effect of sintering rates on depolarization behavior was discussed.
참고문헌 (24)
- T. Wang, , Mater. Chem. Phys, 186, pp.407~414 (2017)
- X. S. Qiao, , J. Am. Ceram. Soc, 99, pp.198~205 (2016)
- X. S. Qiao, , J. Eur. Ceram. Soc, 36, pp.3995~4001 (2016)
- G. Wang, , J. Am. Ceram. Soc, 100, pp.3293~3304 (2017)
- F. Yang, , J. Mater. Chem. C, 5, pp.7243~7252 (2017)
- J. Wang, , Mater. Res. Bull, 67, pp.94~101 (2015)
- H. L. Li, , J. Eur. Ceram. Soc, 36, pp.2849~2853 (2016)
- H. Y. Ma, , Ceram. Int, 39, pp.3721~3729 (2013)
- V. Kalem, , J. Mater. Sci. : Mater. Electron, 27, pp.8606~8612 (2016)
- Xiao-Ming Chen, "Effect of an oxygen treatment on the structure and dielectric property of BiFeO3-doped Na0.47Bi0.47Ba0.06TiO3 lead-free ceramics", Journal of Ceramic Processing Research, 13(4), pp.495~499 (2012), 청정에너지연구소[DOI]
- D. W. Wang, , J. Am. Ceram. Soc, 100, pp.627~637 (2017)
- H. Tian, , Appl. Phys. Expre, 7, pp.062601~ (2014)
- Dang Anh Tuan, "Dielectric and ferroelectric characteristics of doped BZT-BCT ceramics sintered at low temperature", Journal of Ceramic Processing Research, 19(1), pp.32~36 (2018), 청정에너지연구소[DOI]
- J. Zhang, , Nature Commun, 6, pp.6615-1~6615-10 (2015)
- J. Zhang, , Dalton Trans, 45, pp.10891~10896 (2016)
- A. Mahajan, , J. Phys. Chem. C, 121, pp.5709~5718 (2017)
- X.M. Chen, "XRD studies on phase formation and the crystallite structure of BaTiO3 synthesized by HBM: the effect of calcination temperature", Journal of Ceramic Processing Research, 11(4), pp.475~478 (2010), 청정에너지연구소[DOI]
- Seok-Min Yong, "Influence of the SPS heating rate on the optical and mechanical properties of Y2O3-MgO nanocomposites", Journal of Ceramic Processing Research, 20(1), pp.59~62 (2019), 청정에너지연구소[DOI]
- R. Y. Jing, , J. Eur. Ceram. Soc, 38, pp.3111~3117 (2018)
- C. Ma, , J. Appl. Phys, 108, pp.104105~ (2010)
- E.M. Anton, , J. Appl. Phys, 110, pp.094108-1~094108-14 (2011)
- W. Bai, , Dalton Transactions, 46, pp.15340~15353 (2017)
- M. Davies, , J. Am. Ceram. Soc, 94, pp.1314~1316 (2011)
- M. Promsawat, , J. Electroceram, 33, pp.96~104 (2014)