A review on the effects of ceramic sand particles on most casting defects
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Sand particles featuring great refractoriness, chemical stability, strength, and high permeability, which are monitored at hightemperature, are the most common utilized material for shape making. In casting process, the material is first liquefied byheating and then poured into a priori prepared mold cavity where casting is solidified. The cast is then taken out, cleaned, andformulated to the desired shape. In general, there are different types of casting defects such as surface, internal, and visibledefects. However, the shapes and properties of sand particles have a great effect on the quality of casted parts. Nevertheless,other critical factors contribute to the causes of defects such as design of mold, pattern, and core, in addition to metalcomposition, melting, pouring, and gating system. In this paper, the effects of ceramic sand particles on most casting defectsare reviewed and discussed in details.
Abstract
Sand particles featuring great refractoriness, chemical stability, strength, and high permeability, which are monitored at hightemperature, are the most common utilized material for shape making. In casting process, the material is first liquefied byheating and then poured into a priori prepared mold cavity where casting is solidified. The cast is then taken out, cleaned, andformulated to the desired shape. In general, there are different types of casting defects such as surface, internal, and visibledefects. However, the shapes and properties of sand particles have a great effect on the quality of casted parts. Nevertheless,other critical factors contribute to the causes of defects such as design of mold, pattern, and core, in addition to metalcomposition, melting, pouring, and gating system. In this paper, the effects of ceramic sand particles on most casting defectsare reviewed and discussed in details.
참고문헌 (48)
- T. Sivarupan, , J. Add. Manu, 40, pp.101889~ (2021)
- E. Paul, "Materials and Processes in Manufacturing", pp.31~ (2003), John Wiley & Sons, Inc
- H. Pal, , Adv. Appl. Sci. Res, 2(5), pp.360~371 (2011)
- A. Gherissi, , Epit. J. Silic. Bas. Comp. Mate, 72(1), pp.25~29 (2020)
- Kwang Bo Shim, "Cementitiuous materials for crack self-healing concrete", Journal of Ceramic Processing Research, 16, pp.1~13 (2015), 청정에너지연구소[DOI]
- A. Samer, , J. Eng. Mech, 140(6), pp.04014030~04014031 (2014)[DOI]
- Malek Ali, "Synthesis and characterization of Al-SiO2 composites", Journal of Ceramic Processing Research, 20(3), pp.259~263 (2019), 청정에너지연구소[DOI]
- S. Kalpakjian, "Manufacturing, Engineering & Technology" (2006), Pearson Education
- W. Ali, , Inte. Res. J. Eng. Tech, 7(1), pp.878~891 (2020)
- B. S. Kamble, , Int. J. Inno. Res. Sci, 5(2), pp.1281~1288 (2016)
- A. Juriani, , J. Mech. Civil Eng, 12(6), pp.43~54 (2015)
- V. Ingle, , J. Eng. Res. Appl, 7(3), pp.47~54 (2017)
- Chutima Kaemkit, "The effect of Carbon on Si to SiC ratio in Si-SiC composite from natural sand", Journal of Ceramic Processing Research, 21(4), pp.460~464 (2020), 청정에너지연구소[DOI]
- W. A. Ayoola, , CIRP Ann. Manuf. Technol, pp.213~218 (2013)
- M. Ali, , J. Silicate Based and Composite Mate, 72(6), pp.198~204 (2020)
- R.J. Fruehan, "Gases in metals" (1992), ASM International
- O. O. Ajibola, , Int. J. Meta, 2015, pp.1~13 (2015)
- N. A. Ademoh, , Int. J. Phys. Scie, 3(10), pp.240~244 (2008)
- J. Zych, , J. Meta. Foun. Eng, 40(3), pp.191~202 (2014)
- R.W. Cahn, "Physical Metallurgy" (1996), Elsevier
- Eun-Hee Kim, "Property analysis of gypsum bleed pump impeller fabricated by a modified sand-casting method", Journal of Ceramic Processing Research, 22(1), pp.1~7 (2021), 청정에너지연구소[DOI]
- 조근호, "Improving Strength in Casting Mold by Control of Starting Material and Process", 한국세라믹학회지, 53(5), pp.541~547 (2016), 한국세라믹학회
- H.S. Bawa, "Manufacturing Processes-11", pp.25~29 (2004), Tata McGraw-Hill
- S. O. Seidu, , J. Mine. Mate. Char. Eng, 2(5), pp.507~512 (2014)
- C. A. Loto, , J. Appl. Clay Sci, 5(3), pp.249~263 (1990)
- S. R. Shah, , J. Eng. Rese. Appl, 6(2), pp.32~38 (2016)
- D. S. Deore, , Int. J. Adv. Tech. Eng. Sci, 3(1), pp.1571~1580 (2015)
- P. Beeley Met, "Foundry Technology", pp.480~487 (2001), University of leeds
- R. P. Gaikwad, , Int. J. Adv. Res, 4(11), pp.523~531 (2016)
- S.P. Singh, "Workshop Concept", pp.57~ (2021), Orange Books Publication
- F. O. Edoziuno, , Int. J. Res. Eng. Inno, 1(3), pp.225~229 (2017)
- J. O. Aweda, , J. Rese. Infor. Civil Eng, 6(2), pp.68~77 (2009)
- R. Rajkolhe, , Int. J. Res. Adv. Technol, 2(3), pp.375~379 (2014)
- M. R. Latte, , Int. J. Eng. Res. Tech, 10(1), pp.626~631 (2017)
- A. S. Karapse, , J. Emer. Tech. Inno. Res, 3(6), pp.94~98 (2016)
- D. N. Shivappal, , Int. J. Eng. Inve, 1(6), pp.01~05 (2012)
- P. Bhatt, , Int. J. Sci. Eng. Res, 8(12), pp.255~263 (2017)
- V. Nerle, , Int. J. Eng. Res. Tech, 2(9), pp.2180~2188 (2013)
- C. A. Loto, , Appl. Clay Sci, 5(2), pp.165~181 (1990)
- R. T. Patil, , Int. J. Eng. Res. Tech, 4(11), pp.639~644 (2015)
- M.I. Khan, "Manufacturing Science", pp.109~116 (2011), PHI
- S. Guharaja, , Int. J. Adv. Manu. Tech, 30(8), pp.1040~1048 (2006)
- A. M. S. Noohi, , Int. J. Meta. Cast, 11, pp.347~355 (2017)
- P. K. Ganguly, , Int. J. Eng. Sci. Res. Tech, 7(7), pp.115~122 (2018)
- A. Joshi, , Int. J. Mech. Prod. Eng, 2(4), pp.87~92 (2014)
- S. S. Hiremath, , Int. J. Inno. Eng. Res. Tech, 2(9), pp.1~9 (2015)
- N. Qosim, , J. Appl. Eng. Tech. Sci, 2(1), pp.1~6 (2020)
- A. A. Gaware, , Int. J. Innov. Eng. Sci, 2(5), pp.1~19 (2017)