Taguchi analysis in investigation of feed force, cutting force and thrust force while machining aluminium metal matrix composite
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Metal matrix composite finds several applications in automotive and aerospace sectors because of its excellent mechanicalproperties and ease of machinability characteristics Taguchi analysis is used to investigate the cutting force, feed force and thethrust force while machining aluminium metal matrix composite. The analysis of variance (ANOVA) is used to investigate theexperimental results and the parameters influencing the cutting force, feed force and thrust force in turning of aluminiummetal matrix composite. Taguchi analysis is used and the response table for the feed force, cutting force and Thrust force iscalculated and it is found the forces are highly influence by the steam pressure.
Abstract
Metal matrix composite finds several applications in automotive and aerospace sectors because of its excellent mechanicalproperties and ease of machinability characteristics Taguchi analysis is used to investigate the cutting force, feed force and thethrust force while machining aluminium metal matrix composite. The analysis of variance (ANOVA) is used to investigate theexperimental results and the parameters influencing the cutting force, feed force and thrust force in turning of aluminiummetal matrix composite. Taguchi analysis is used and the response table for the feed force, cutting force and Thrust force iscalculated and it is found the forces are highly influence by the steam pressure.
참고문헌 (14)
- J. Kim, , Manuf. Lett, 32, pp.63~66 (2022)
- N. H. Ononiwu, , Mater. Today : Proc, 44, pp.1124~1129 (2021)
- V. V. Bhandarkar, , IOP Conf. Ser. : Mater. Sci. Eng, 1013(1), pp.012022~ (2021)
- Y. Sesharao, , Adv. Mater. Sci. Eng, pp.1609769~ (2021)
- A. Kannan, , J. Mater. Res. Technol, 9(6), pp.16529~16540 (2020)
- C. P. Rao, , Mater. Today : Proc, 5(11), pp.24770~24779 (2018)
- K. S. Kumar, , J. Mech. Behav. Mater, 28(1), pp.146~152 (2019)
- R. Vinayagamoorthy, "A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite", Journal of Mechanical Science and Technology, 32(5), pp.2011~2020 (2018), 대한기계학회
- M. P. Jenarthanan, , Int. J. Eng. Sci. Technol, 5(4), pp.22~36 (2013)
- Senthil Kumar KM, "Experimental investigation of palm kernel fibre reinforced epoxy based composite", Journal of Ceramic Processing Research, 22(6), pp.731~738 (2021), 청정에너지연구소[DOI]
- R. Shetty, , J. Zhejiang Univ-Sc A, 9(9), pp.1245~1250 (2008)
- Mukesh Kumar, "Modeling and optimization of material removal rate and surface roughness for Al6010 HMMCs on WEDM using Response Surface Methodology", Journal of Ceramic Processing Research, 23(3), pp.373~382 (2022), 청정에너지연구소[DOI]
- Shivaperumal M, "Parametric optimization in machining of GFRP composite by taguchi grey relational analysis", Journal of Ceramic Processing Research, 23(3), pp.404~408 (2022), 청정에너지연구소[DOI]
- Thirumalai R, "Microstructural analysis and optimization of welding parameters for AA1100 welded plates", Journal of Ceramic Processing Research, 23(2), pp.221~227 (2022), 청정에너지연구소[DOI]