Effect of hybrid ceramic addition on Al7075 for prompt utilization
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In recent engineering applications, lightweight aluminium composites are becoming more popular as an alternative for ferrousmetals. The high cost of component manufacture has kept particulate metal matrix composites from being widely used inengineering applications. The goal of this research is to characterize stir cast Al-7075/B4C/Si3N4 reinforced hybrid composites. Hard ceramic reinforcements increase the microstructure, mechanical, and wear qualities of the material. B4C and ZrB2particles were incorporated into the Al matrix at different weight percents, such as 2, 4, 6, and 8. The microstructure, andproperties of mechanical as well as wear of ZrB2 and B4C particle composition were examined. In addition, SEM and XRDwere used to investigate the castings' morphology. As a result, hardness and strength rise as the amount of B4C-ZrB2 in thecomposite increases. The Al7075 + 8% B4C + 1% ZrB2 composite outperform all the considered composition. Furthermore,with increasing sliding distances, the specific wear rate increases and the coefficient of friction decreases. Because of itsoutstanding mechanical and wear properties, the hybrid Al7075-B4C-ZrB2 material is the excellent choice of upper wingrequirements.
Abstract
In recent engineering applications, lightweight aluminium composites are becoming more popular as an alternative for ferrousmetals. The high cost of component manufacture has kept particulate metal matrix composites from being widely used inengineering applications. The goal of this research is to characterize stir cast Al-7075/B4C/Si3N4 reinforced hybrid composites. Hard ceramic reinforcements increase the microstructure, mechanical, and wear qualities of the material. B4C and ZrB2particles were incorporated into the Al matrix at different weight percents, such as 2, 4, 6, and 8. The microstructure, andproperties of mechanical as well as wear of ZrB2 and B4C particle composition were examined. In addition, SEM and XRDwere used to investigate the castings' morphology. As a result, hardness and strength rise as the amount of B4C-ZrB2 in thecomposite increases. The Al7075 + 8% B4C + 1% ZrB2 composite outperform all the considered composition. Furthermore,with increasing sliding distances, the specific wear rate increases and the coefficient of friction decreases. Because of itsoutstanding mechanical and wear properties, the hybrid Al7075-B4C-ZrB2 material is the excellent choice of upper wingrequirements.
참고문헌 (26)
- F. Nturanabo, , Al Alloys and Comp, 13, pp.1~24 (2020)
- A. Chandrashekar, , Symmetry, 13(4), pp.1~38 (2021)
- Nirala, , Materials, 15(6), pp.1~20 (2022)
- K. K. Alaneme, , J. Mater. Res. Technol, 8(1), pp.670~682 (2019)
- D. M. Shinde, , Adv. Compos, 29(28), pp.1~28 (2020)
- S. Pan, , Friction, 10, pp.1596~1634 (2022)
- E. E. Feldshtein, , Materials, 14(1), pp.1~12 (2021)
- A. S. Mohammed, , Materials, 15(3), pp.2~13 (2022)
- D. K. Rajak, , Polymers, 11(10), pp.1~37 (2019)
- Mirabedini, , Adv. Sci, 7(11) (2020)
- D. J. Joseph, , Int. J. Eng. Res. Technol, 7(6), pp.1~7 (2019)
- Kloeckner metals, "Comparing 7075 Aluminum Vs 6061", 1~8 (2021)
- S. Gudipudi, , Eng. Sci. Technol. an Int. J, 23(5), pp.1233~1243 (2020)
- E. W. A. Fanani, , Metals, 11(12), pp.1~30 (2021)
- K. Friedrich, , Adv. Indus. and Engg. Poly. Res, 1(1), pp.3~39 (2018)
- M. Niemczewska-Wójcik, , Materials, 16(1), pp.1~23 (2023)
- R. Suresh, , J. Mech. Behav. Mater, 29(1), pp.57~68 (2020)
- R. Gupta, , Metal. Soc, 31(12), pp.3613~3625 (2021)
- K. V. S. L. Dathathreya, , Int. J. Eng. Res. Technol, 11(1), pp.161~167 (2022)
- Senthilkumar KM, "Optimization of stir casting process parameter using response surface meth odology", Journal of Ceramic Processing Research, 23(2), pp.233~236 (2022), 청정에너지연구소[DOI]
- R. Malkiya Rasalin Prince, , Adv. Mater. Process, 8(4), pp.4209~4228 (2022)
- Yuze Xue, "Improved temperature stability of Ba0.5Sr0.5TiO3", ZnAl2O4 ceramics by controlling microstructure with sintering behavior, 2023, pp.24(2), 336~341[DOI]
- R. Santhanakrishnan, "Taguchi analysis in investigation of feed force, cutting force and thrust force while machining aluminium metal matrix composite", Journal of Ceramic Processing Research, 24(1), pp.174~181 (2023), 청정에너지연구소[DOI]
- Wang Chuanyun, "Synthesis of Co:MgAl2O4 nano-powders for saturable absorber", Journal of Ceramic Processing Research, 24(2), pp.374~378 (2023), 청정에너지연구소[DOI]
- Dagyeong Lee, "Effect of MgO-CaO-Al2O3-SiO2 glass additive on densification of Al2O3 ceramics", Journal of Ceramic Processing Research, 23(2), pp.149~153 (2022), 청정에너지연구소[DOI]
- P. Mohan Kumar, "Effect of Al2O3", PSZ and Al2O3, Journal of Ceramic Processing Research, pp.2022, 23(5)[DOI]