Controlling the size and carbon composition to determine the electrical conductivity of the kaolin-carbon composite
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The study is about the fabrication of kaolin-carbon ceramic composites, by controlling the size of carbon particles, with themesh size of 150; 200; 250. Kaolin-carbon ceramic composite is fabricated with a composition ratio of 50:50; 60:40; and70:30% weight, sintering pyrolysis at 950 °C, rate 2°C/min, compaction 200 bar. The physical properties of the density/porosity, the conductivity properties of electric currents and voltages, the properties of electrical conductivity, elements andmicrostructures have been investigated. The smaller the size of the carbon particles, the lower the density. The higher thekaolin content the higher the composite density. At a composition ratio of 50:50 %wt, the size of the mesh carbon particle 150,at a voltage value of 4 volts, conducts an electric current of 0.89 [Ampere], and exhibits an electrical conductivity of 17 [S/m].
Abstract
The study is about the fabrication of kaolin-carbon ceramic composites, by controlling the size of carbon particles, with themesh size of 150; 200; 250. Kaolin-carbon ceramic composite is fabricated with a composition ratio of 50:50; 60:40; and70:30% weight, sintering pyrolysis at 950 °C, rate 2°C/min, compaction 200 bar. The physical properties of the density/porosity, the conductivity properties of electric currents and voltages, the properties of electrical conductivity, elements andmicrostructures have been investigated. The smaller the size of the carbon particles, the lower the density. The higher thekaolin content the higher the composite density. At a composition ratio of 50:50 %wt, the size of the mesh carbon particle 150,at a voltage value of 4 volts, conducts an electric current of 0.89 [Ampere], and exhibits an electrical conductivity of 17 [S/m].
참고문헌 (27)
- M. Kubliha, , Appl. Clay Sci, 149, pp.8~12 (2017)
- D. O. Obada, , Appl. Clay Sci, 150, pp.175~183 (2017)
- R. Kumar, , J. Asian Ceram. Soc, 5, pp.304~312 (2017)
- H. Katsuki, , J. Asian Ceram. Soc, 8, pp.492~501 (2020)
- Jong-Young Kim, "Properties of Kaolinite as a Raw Material for Porcelain", 한국세라믹학회지, 56(6), pp.566~576 (2019), 한국세라믹학회[DOI]
- H. I. Riyap, , J. Asian Ceram. Soc, 7, pp.199~212 (2019)
- V. Mymrin, , Appl. Clay Sci, 155, pp.95~102 (2018)
- J. Ondruška, , Appl. Clay Sci, 154, pp.36~42 (2018)
- K. A. Jaradat, , Appl. Clay Sci, 150, pp.163~174 (2017)
- A. Kriaa, , Surf. Eng. Appl. Electrochem, 50, pp.84~94 (2014)
- S. B. Rekik, , Appl. Clay Sci, 143, pp.1~9 (2017)
- A. Yaya, , Appl. Clay Sci, 150, pp.125~130 (2017)
- H. P. A. Alves, , Ceram. Int, 42, pp.19086~19090 (2016)
- S. Boussen, , Appl. Clay Sci, 123, pp.210~221 (2016)
- Z. Hou, , Ceram. Int, 42, pp.17254~17258 (2016)
- S. K. Hubadillah, , J. Asian Ceram. Soc, 4, pp.164~177 (2016)
- Agus Edy Pramono, "Properties of ceramic fabricated of synthetic carbon and organoclay based on carbon particle size", Journal of Ceramic Processing Research, 21(4), pp.465~478 (2020), 청정에너지연구소[DOI]
- N. Belmokhtar, , Appl. Clay Sci, 162, pp.1~9 (2018)
- A. Mocciaroa, , Appl. Clay Sci, 153, pp.90~94 (2018)
- L. Basnayaka, , Appl. Clay Sci, 156, pp.45~52 (2018)
- M. M. Bazin, , J. Asian Ceram. Soc, 7, pp.417~425 (2019)
- E. Karamanova, , J. Eur. Ceram. Soc, 31, pp.989~998 (2011)
- H. P. S. Abdul Khalil, , Int. J. Polym. Anal. Charact, 18, pp.329~338 (2013)
- Hyegsoon An, "Effect of Nickel Addition on Sintering Behavior and Electrical Conductivity of BaCe0.35Zr0.5Y0.15O3-δ", 한국세라믹학회지, 56(1), pp.91~97 (2019), 한국세라믹학회[DOI]
- 김영래, "Fabrication and Electrical Properties of Highly Organized Single-Walled Carbon Nanotube Networks for Electronic Device Applications", 한국세라믹학회지, 54(1), pp.66~69 (2017), 한국세라믹학회
- L. M. Manocha, , Mech. Adv. Mater. Struct, 21, pp.172~180 (2014)
- D.O. Obada, , Appl. Clay Sci, 132-133, pp.194~204 (2016)