Spark erosion behaviour of SiC and Yitria ceramic particles reinforced aluminium hybrid nano-composites
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The Aluminium hybrid nano composite (Al-SiC-Yttria) was produced through powder metallurgy using Silicon Carbide (SiC)and Yttrium Oxide (Y2O3) as reinforcement particles. This work aims to arrive at the optimum Electric Discharge Machining(EDM) parameters for Al-SiC -Y2O3 hybrid nano composites. Current (I), Pulse on Time (PTon) and Pulse off Time (PToff)were selected as parameters and the influence on material removal (MR) and Surface roughness (SR) have been investigated. This work presents an experimental study to achieve optimal EDM parameters by employing Grey Relational Analysis (GRA). The dominance of process parameters on the response parameters were analysed using Analysis of Variance (ANOVA) as well. I: 5 A, PT on : 50 μs, and PToff : 20μs were found to be the optimal machining parameters for the EDM of Al-SiC-Y2O3composites.
Abstract
The Aluminium hybrid nano composite (Al-SiC-Yttria) was produced through powder metallurgy using Silicon Carbide (SiC)and Yttrium Oxide (Y2O3) as reinforcement particles. This work aims to arrive at the optimum Electric Discharge Machining(EDM) parameters for Al-SiC -Y2O3 hybrid nano composites. Current (I), Pulse on Time (PTon) and Pulse off Time (PToff)were selected as parameters and the influence on material removal (MR) and Surface roughness (SR) have been investigated. This work presents an experimental study to achieve optimal EDM parameters by employing Grey Relational Analysis (GRA). The dominance of process parameters on the response parameters were analysed using Analysis of Variance (ANOVA) as well. I: 5 A, PT on : 50 μs, and PToff : 20μs were found to be the optimal machining parameters for the EDM of Al-SiC-Y2O3composites.
참고문헌 (38)
- M. Manoj, "Synthetization and investigation on mechanical characteristics of aluminium alloy 7075 with TiB2 composite", Journal of Ceramic Processing Research, 22(4), pp.475~481 (2021), 청정에너지연구소[DOI]
- Muhammad Shahid, "Synthesis and mechanical characterization of alumina based composite material for armor application", Journal of Ceramic Processing Research, 22(2), pp.149~157 (2021), 청정에너지연구소[DOI]
- Elaya Perumal Annamalai, "Investigations on aluminium hybrid composites reinforced with ZrB2", Al2O3, Journal of Ceramic Processing Research, pp.2020, 21(5)[DOI]
- Fengge Song, "Synthesis and photocatalytic properties of ZnO@ZIF-8 nanostructured composites", Journal of Ceramic Processing Research, 22(5), pp.521~526 (2021), 청정에너지연구소[DOI]
- C. Liu, , Ceram. Inter, 29(6), pp.679~687 (2003)
- R.K. Garg, , Int. J. Adv. Manuf. Technol, 50(5-8), pp.611~624 (2010)
- 정도관, "Recent Researches in Micro Electrical Machining", International Journal of Precision Engineering and Manufacturing, 12(2), pp.371~380 (2011), 한국정밀공학회
- B. Hwa Yan Che, , Int. J. Mach. Tools Manuf, 40(10), pp.1403~1421 (2000)
- F. Müller, , Int. J. Mach. Tools Manuf, 40(9), pp.1351~1366 (2000)
- M. Ramulu, , Compos. Struct, 554(1), pp.79~86 (2001)
- F. Müller, , J. Mater. Process. Technol, 118(1-3), pp.278~285 (2001)
- B. Mohan, , J. Mater. Process. Technol, 124(3), pp.297~304 (2002)
- H. C. Tsai, , Int. J. Mach. Tools Manuf, 43(3), pp.245~252 (2003)
- P. M. George, , J. Mater. Process. Technol, 145(1), pp.66~71 (2004)
- J. Qu, , J. Mater. Process. Technol, 166(3), pp.440~448 (2005)
- A. K. Khanra, , J. Mater. Process. Technol, 183(1), pp.122~126 (2007)
- D. Guo, , Int. J. Miner. Metall. Mater, 14(5), pp.464~468 (2007)
- S. Dhar, , J. Mater. Process. Technol, 194(1-3), pp.24~29 (2007)
- K. Bonny, , Wear, 265(11-12), pp.1884~1892 (2008)
- K. M. Patel, , Int. J. Refract. Met. Hard Mater, 27(5), pp.892~899 (2009)
- S. Lopez-Esteban, , Scr. Mater, 63(2), pp.219~222 (2010)
- V. Senthilkumar, , J. Manuf. Process, 13(1), pp.60~66 (2011)
- O. Malek, , J. Eur. Ceram. Soc, 31(11), pp.2023~2030 (2011)
- D. Kanagarajan, , Mater. Des, 39, pp.469~474 (2012)
- M. Srinivasan, "Minimization of delamination, surface roughness and thrust force in drilling of Al2O3 ceramic particle filled CFRP composites", Journal of Ceramic Processing Research, 22(3), pp.345~355 (2021), 청정에너지연구소[DOI]
- F. Q. Hu, "Surface Properties of SiCp", Al Composite by Powder-Mixed EDM, 2013, pp.6, 101~106
- S. Assarzadeh, , Procedia CIRP, 6, pp.463~468 (2013)
- A. Singh, , Procedia Eng, 64, pp.1157~1165 (2013)
- K. Rajkumar, , Procedia Eng, 97, pp.1543~1550 (2014)
- R. Kumar Bhuyan, , Mater. Today: Proc, 2(4-5), pp.3116~3124 (2015)
- K. Mausam, , Mater. Today : Proc, 3(10), pp.4102~4108 (2016)
- A. Dey, , Trans. Nonferrous Met. Soc. China, 27(5), pp.998~1010 (2017)
- B. Chandra Kandpal, , Mater. Today : Proc, 5(2), pp.4413~4420 (2018)
- L. Selvarajan, , Mater. Today : Proc, 5(2), pp.8080~8088 (2018)
- C. Kar, , Proced. Manuf, 20, pp.392~399 (2018)
- K. R. Aharwal Sitaram, , Mater. Today : Proc, 5(2), pp.5391~5397 (2018)
- S. Thirumalai Kumaran, , Measurement, 123, pp.203~212 (2018)
- P. P. Shantharaman, , Trans. Indian Inst. Met, 71(4), pp.909~914 (2018)