용융탄산염 연료전지용 탈황 흡착제 적용을 위한 거창 화강석 석분 슬러지의 유리화 과정 및 유리화 특성 분석
Analysis of Vitrification Processes and Characteristics of Geochang Granite Stone Sludge for Desulfurization Sorbent of MCFC
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The vitrification processes and characteristics of Geochang granite stone sludge were investigated for the application of desulfurization sorbent of Molten Carbonate Fuel Cell (MCFC). From the X-ray fluorescence analysis (XRF) results using Geochang granite stone sludge, it was confirmed that the network formers (SiO2 and Al2O3) in granite stone sludge were present between 83.2 and 87.2 wt% and the rest was comprised of network modifiers (K2O, Na2O, CaO, Fe2O3 and MgO). When Borax (Na2B4O7-10H2O) was added in the granite stone sludge system for promoting the decomposition and reducing the melting viscosity of refractory SiO2 and Al2O3 comprising of stone sludge, it was observed that the melting point of the granite stone sludge system was reduced by more than 400°C and the optimized melting temperature for granite stone and borax systems was around 1400°C when comparing X-ray diffraction analysis (XRD) results. Phase transitions and thermal reactions of granite stone sludge systems were also investigated from thermal analysis using Thermogravimetric Analysis (TGA)/ Differential Scanning Calorimeter (DSC).
Abstract
The vitrification processes and characteristics of Geochang granite stone sludge were investigated for the application of desulfurization sorbent of Molten Carbonate Fuel Cell (MCFC). From the X-ray fluorescence analysis (XRF) results using Geochang granite stone sludge, it was confirmed that the network formers (SiO2 and Al2O3) in granite stone sludge were present between 83.2 and 87.2 wt% and the rest was comprised of network modifiers (K2O, Na2O, CaO, Fe2O3 and MgO). When Borax (Na2B4O7-10H2O) was added in the granite stone sludge system for promoting the decomposition and reducing the melting viscosity of refractory SiO2 and Al2O3 comprising of stone sludge, it was observed that the melting point of the granite stone sludge system was reduced by more than 400°C and the optimized melting temperature for granite stone and borax systems was around 1400°C when comparing X-ray diffraction analysis (XRD) results. Phase transitions and thermal reactions of granite stone sludge systems were also investigated from thermal analysis using Thermogravimetric Analysis (TGA)/ Differential Scanning Calorimeter (DSC).
참고문헌 (10)
- 정석영, "건설폐기물, 생활폐기물의 용출특성 분석과 BMP test를 통한 최종메탄(CH4) 및 황화수소(H2S) 수율 산정", 신재생에너지, 10(1), pp.30~40 (2014), 한국신·재생에너지학회
- 박혜정, "현무암의 용융특성과 연속섬유 방사 연구", Composites Research, 23(3), pp.43~49 (2010), 한국복합재료학회
- Sim J., "Characteristics of basalt fiber as a strengthening material for concrete structure", Composites: Part B, 36(6-7), pp.504~512 (2005)
- Terry Lay G. F., "Characteristics of silicate glasses derived from vitrification of manganese crust tailings", Ceram. Int, 35(5), pp.1961~1967 (2009)
- 김병호, "유리공학" (2013), 청문각
- Kuo Y. M., "Effect of Al2O3 mole fraction and cooling method on vitrification of an artificial hazardous material. Part 1:Variation of crystalline phases and slag structures", J. Hazarad. Mater, 169(1-3), pp.626~634 (2009)
- Kim Y., "Effect of cooling rate and alumina dissolution of the determination of temperature of critical viscosity of molten slag", Fuel Process. Technol, 91(8), pp.853~858 (2010)
- Vassilev S. V., "Influence of mineral and chemical composition of coal ashed on their fusibility", Fuel Process. Technol, 45(1), pp.27~51 (1995)
- Wang S., "Utilization of coal fly ash for the production of galss-ceramics with unique performances: A Brief Review", J. Mater. Sci. Technol, 30(12), pp.1208~1212 (2014)
- Jie L. I., "Quantum and experimental study on coal ash fusion with borax fluxing agent", J. Fuel Chem. Technol, 36(5), pp.519~523 (2008)