저온 소성용 TiO2 페이스트를 이용한 유연 염료감응 태양전지 제작
Fabrication of Flexible Dye-sensitized Solar Cells using Low Temperature Annealing TiO2 Paste
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study examined the production of flexible dye-sensitized solar cells (DSSCs). The heat treatment temperature of the TiO2 working electrode needs to be lowered before it can be used on flexible substrate. Therefore a low-temperature sintering paste was developed using commercially available TiO2 nano-particles (P25). The TiO2 paste was prepared by changing the amount of titanium isoproxide (TTIP) as a binder. Photo-electrodes were prepared using the commercially available and home-made TiO2 paste for comparison. The DSSCs using home-made TiO2 paste showed a power conversion efficiency (PCE) of 4.167%.
Abstract
This study examined the production of flexible dye-sensitized solar cells (DSSCs). The heat treatment temperature of the TiO2 working electrode needs to be lowered before it can be used on flexible substrate. Therefore a low-temperature sintering paste was developed using commercially available TiO2 nano-particles (P25). The TiO2 paste was prepared by changing the amount of titanium isoproxide (TTIP) as a binder. Photo-electrodes were prepared using the commercially available and home-made TiO2 paste for comparison. The DSSCs using home-made TiO2 paste showed a power conversion efficiency (PCE) of 4.167%.
참고문헌 (14)
- A. J. Medford, "Grid-connected polymer solar panels initial considerations of cost, lifetime, and practicality", Opt. Express, 18(S3), pp.A272~A285
- F. C. Krebs, "A roll-to-roll process to flexible polymer solar cells model studies, manufacture and operational stability studies", J. Mater. Chem., 19, pp.5442~5451
- B. O’Regan, "A low cost,high-efficiency solar cell based on dye-sensitized colloidal TiO2 films", Nature, 통권 : 353, pp.737~740 (1991)
- Y. R. Jung, "A simple method to achieve light scatterig in dye-sensitized solar cells using a low-temperature-sintering TiO2 paste", Mater. Lett., 138, pp.268~271
- J. H. Kim, "Ga-doped ZnO transparent electrodes with TiO2 blocking layer", nanoparticles for dye-sensitized solar cells, pp.7(11), ~
- Z. Shaban, "Optimization of ZnO thin film through spray pyrolysis technique and its application as a blocking layer to improving dye sensitized solar cell efficiency", Current Applied Physics, 16(2), pp.131~134 (2016), 한국물리학회
- Y. Horie, "Enhancement of photocurrent by columnar Nb-doped TiO2 compact layer in dye sensitized solar cells with low temperature process of dc sputtering", Electochi. Acta, 187, pp.348~357
- F. Pichot, "Low-Temperature Sintering of TiO2 Colloids Application to Flexible Dye-Sensitized Solar Cells", Langmuir, 16, pp.5626~5630
- D. Zhang, "Low-Temperature Fabrication of Efficient Porous Titania Photoelectrodes by Hydrothermal Crystallization at the Solid Gas Interface", Adv. Mater., 15(10), pp.814~817
- J. Bandy, "Electrophoretic Deposition of Titanium Oxide Nanoparticle Films for Dye-Sensitized Solar Cell Applications", Mater. Sci. Applications, 2, pp.1427~1431
- J. W. Lee, "Energy harvesting of flexible and translucent dye-sensitized solar cell fabricated by laser assisted nano particle deposition system", Electrochim, Acta, 103, pp.252~258
- P. Balraju, "Effect of counter electrode, thickness and sintering temperature of TiO2 electrode and TBP addition in electrolyte on photovoltaic performance of dye sensitized solar cell using pyronine G (PYR) dye", J. Photochem. Photobiol A, 206, pp.53~63
- T. Miyaska, "Low-Temperature Fabrication of Dye-Sensitized Plastic Electrodes by Electrophoretic Preparation of Mesoporous TiO2 Layers", J. Electrochem. Soc., 151(11), pp.A1767~A1773
- D. Vorkapic, "Effect of Temperature and Alcohols in the Preparation of Titania Nanoparticles from Alkoxides", J. Am. Ceram. Soc., 81(11), pp.2815~2820