식품부산물인 커피박과 폐식용유를 첨가제로 사용하여 파일럿 규모의 평다이 성형기로 제조한 리기다소나무 및 신갈나무 펠릿의 연료적 특성
Fuel Characteristics of Pitch Pine and Mongolian Oak Pellets Fabricated with Coffee Waste and Used Frying Oil as an Additive Using a Pilot-scale Flat-die Pellet Mills
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study evaluated the potential of coffee waste (CW) and used frying oil (UFO) as an additive in the production of pitch pine (PIP) and Mongolian oak (MOK) pellets. Ash contents obtained from CW and UFO were 0.5% and <0.1%, respectively. The calorific values of UFO (31.4 MJ/kg) and CW (26.3 MJ/kg) are higher than PIP (20.6 MJ/kg) and MOK (19.1 MJ/kg). For pellets fabricated using a pilot-scale flat-die pellet mill, regardless of fabricating conditions, moisture content (MC) and bulk density of PIP and MOK pellets satisfied the A1 wood pellet standard for residential and small-scale commercial uses, as designated by the National Institute of Forest Science (NIFOS) of the Republic of Korea. When CW was used as an additive, durability of PIP pellets made with 12%-MC sawdust and MOK pellets increased. The optimal conditions for producing PIP and MOK pellets could be by adding 20 mesh CW as an additive and the using of 12%-MC sawdust. However, durability of PIP pellets and ash content MOK pellets did not satisfy the A1 wood pellet standard of NIFOS. Thus, further research is needed to improve the properties of wood pellets with additives.
Abstract
This study evaluated the potential of coffee waste (CW) and used frying oil (UFO) as an additive in the production of pitch pine (PIP) and Mongolian oak (MOK) pellets. Ash contents obtained from CW and UFO were 0.5% and <0.1%, respectively. The calorific values of UFO (31.4 MJ/kg) and CW (26.3 MJ/kg) are higher than PIP (20.6 MJ/kg) and MOK (19.1 MJ/kg). For pellets fabricated using a pilot-scale flat-die pellet mill, regardless of fabricating conditions, moisture content (MC) and bulk density of PIP and MOK pellets satisfied the A1 wood pellet standard for residential and small-scale commercial uses, as designated by the National Institute of Forest Science (NIFOS) of the Republic of Korea. When CW was used as an additive, durability of PIP pellets made with 12%-MC sawdust and MOK pellets increased. The optimal conditions for producing PIP and MOK pellets could be by adding 20 mesh CW as an additive and the using of 12%-MC sawdust. However, durability of PIP pellets and ash content MOK pellets did not satisfy the A1 wood pellet standard of NIFOS. Thus, further research is needed to improve the properties of wood pellets with additives.
참고문헌 (27)
- "Wood pellet market - Growth, trends, COVID-19 impact, and forecasts (2022 - 2027)" (2022)[URL]
- "Production and importation of wood pellets" (2022)[URL]
- Kaliyan, N., "Factors affecting strength and durability of densified biomass products", Biomass Bioenergy, 33(3), pp.337~359 (2009)
- Serrano, C., "Effect of moisture content, particle size and pine addition on quality parameters of barley straw pellets", Fuel Processing Technology, 92(3), pp.699~706 (2011)
- Tenorio, C., "Quality of pellets made from agricultural and forestry crops in costa rican tropical climates", BioRes., 10(1), pp.482~498 (2015)
- Tarasov, D., "Effect of additives on wood pellet physical and thermal characteristics:A review", Int. Sch. Res. Notices, pp.876939~ (2013)
- Pradhan, P., "Production and utilization of fuel pellets from biomass: A review", Fuel Processing Technology, 181, pp.215~232 (2018)
- Boschetti, W. T. N., "Potential of kraft lignin as an additive in briquette production", Nord. Pulp Pap. Res. J., 34(1), pp.147~152 (2019)
- "Recycling way of coffee wastes" (2022)[URL]
- 양인, "커피박과 낙엽송 목분을 이용한 펠릿 제조 및 이에 대한 상용화 검토", 목재공학, 46(1), pp.48~59 (2018), 한국목재공학회
- Kim, M.J., "Recycling fuel pellets using coffee waste", Korean Intellectual Property Office, ~ (2019)
- Lee, S. K., "Solid fuels essentially based on materials of non-mineral origin on vegetable substances", Korean Intellectual Property Office, ~ (2011)
- 오도건, "반탄화에 의한 커피박 연료특성", 신재생에너지, 9(3), pp.29~35 (2013), 한국신·재생에너지학회
- Wang, Y., "Effects of waste engine oil additive on the pelletizing and pyrolysis properties of wheat straw", BioRes., 14(1), pp.537~553 (2019)
- Craven, J. M., "Hydrophobic coatings for moisture stable wood pellets", Biomass Bioenergy, 80, pp.278~285 (2015)
- Saletnik, A., "Modification of energy parameters in wood pellets with the use of waste cooking oil", Energies, 14(20), pp.6486~ (2021)
- Siwale, W., "Understanding off-gassing of biofuel wood pellets using pellets produced from pure microcrystalline cellulose with different additive oils", Energies, 15(6), pp.2281~ (2022)
- Mišljenovic, N., "The effect of waste vegetable oil addition on pelletability and physical quality of wood pellets", Annual Transactions of the Nordic Rheology Society, 22, pp.211~218 (2014)
- Lee, H. Y., "Manufacturing method of wood pellet for biomass generation using meagre waste wood", Korean Intellectual Property Office, ~ (2015)
- 이응수, "식물유 및 오존산화 식물유를 첨가한 낙엽송 목재펠릿의 생산성 및 품질특성에 관한 연구", 목재공학, 39(4), pp.359~369 (2011), 한국목재공학회
- Oasmaa, A., "Fast pyrolysis of Biomass : A Handbook Vol. 3" (2002), CPL press
- 최준원, "목질바이오매스의 급속열분해에 의해 생성된 바이오오일의 특성 분석", 목재공학, 34(6), pp.36~43 (2006), 한국목재공학회
- 양인, "신갈나무 및 리기다소나무 목분으로 제조한 펠릿의 연료적 특성에 목분의 함수율과 크기 및 생산시간이 미치는 영향", 신재생에너지, 11(3), pp.11~20 (2015), 한국신·재생에너지학회[DOI]
- "Current price of used frying oil produced from fried-chicken restaurant" (2021)[URL]
- 김현정, "첨가제로서 율피차 부산물과 피마자유가 리기다소나무 및 신갈나무 펠릿의 연료적 특성에 미치는 영향", 신재생에너지, 18(2), pp.1~8 (2022), 한국신·재생에너지학회[DOI]
- Korea Forest Research Institute, "Specifications and quality standards of wood products 2020-3", ~ (2020)
- Ahn, B. J., "Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdust", Renewable Energy, 62, pp.18~23 (2014)