첨가제로서 율피차 부산물과 피마자유가 리기다소나무 및 신갈나무 펠릿의 연료적 특성에 미치는 영향
Effect of Chestnut-shell Tea Waste and Castor Oil as an Additive on Fuel Characteristics of Pellets Fabricated with Pitch Pine and Mongolian Oak
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study aimed to determine the optimal conditions for fabricating pitch pine (PCP) and Mongolian oak (MOK) pellets using chestnut-shell tea waste (CSW) and castor oil (CSO) as additives. For pellets fabricated using a pilot-scale flat-die pellet mill, all moisture content (MC) was in line with A1 wood pellet standards for residential and small-scale commercial uses designated by the National Institute of Forest Science at the Republic of Korea (NIFOS), regardless of fabricating conditions; the durability of PCP pellets prepared using PCP particles with 10% MC, and CSW addition also satisfied these criteria. The moisture tolerance of PCP pellets improved with combination of 2 wt% CSW and 2-6 wt% CSO. Overall, use of 20 mesh CSW as an additive, PCP with 10% MC, and MOK with 12% MC was found to be optimal. Moreover, using CSO as an additive, high-quality PCP and MOK pellets can be fabricated by adjusting the particles to 12% MC. However, the durability of PCP and MOK pellets prepared using these conditions did not meet the wood pellet standards for residential and small-scale commercial use. Therefore, further research is needed to improve the durability of these pellets.
Abstract
This study aimed to determine the optimal conditions for fabricating pitch pine (PCP) and Mongolian oak (MOK) pellets using chestnut-shell tea waste (CSW) and castor oil (CSO) as additives. For pellets fabricated using a pilot-scale flat-die pellet mill, all moisture content (MC) was in line with A1 wood pellet standards for residential and small-scale commercial uses designated by the National Institute of Forest Science at the Republic of Korea (NIFOS), regardless of fabricating conditions; the durability of PCP pellets prepared using PCP particles with 10% MC, and CSW addition also satisfied these criteria. The moisture tolerance of PCP pellets improved with combination of 2 wt% CSW and 2-6 wt% CSO. Overall, use of 20 mesh CSW as an additive, PCP with 10% MC, and MOK with 12% MC was found to be optimal. Moreover, using CSO as an additive, high-quality PCP and MOK pellets can be fabricated by adjusting the particles to 12% MC. However, the durability of PCP and MOK pellets prepared using these conditions did not meet the wood pellet standards for residential and small-scale commercial use. Therefore, further research is needed to improve the durability of these pellets.
참고문헌 (10)
- "Wood pellets statistical data" (2019)[URL]
- 이승록, "지속가능한 산림바이오매스 정책개발을 위한 영국사례 연구", 신재생에너지, 17(1), pp.50~60 (2021), 한국신·재생에너지학회[DOI]
- Research on wood pellet management based on prediction of future supply and demand for wood pellet, "Han, G.S.", Korea Forest Service, ~ (2010)
- 양인, "커피박과 낙엽송 목분을 이용한 펠릿 제조 및 이에 대한 상용화 검토", 목재공학, 46(1), pp.48~59 (2018), 한국목재공학회
- 양인, "신갈나무 및 리기다소나무 목분으로 제조한 펠릿의 연료적 특성에 목분의 함수율과 크기 및 생산시간이 미치는 영향", 신재생에너지, 11(3), pp.11~20 (2015), 한국신·재생에너지학회[DOI]
- 안병준, "바인더의 첨가가 목재 펠릿의 연료적 특성에 미치는 영향", 목재공학, 41(6), pp.475~489 (2013), 한국목재공학회
- National Institute of Forest Science, "Specifications and quality standards of wood products 2020-3", ~ (2020)
- 장민정, "리기다소나무(Pinus rigida Mill.) 내수피 추출물에 대한 화장품소재로써의 항염 및 항균효과", 한국산림과학회지, 97(3), pp.215~220 (2008), 한국산림과학회
- Cha, D. S., "Power requirement and particle size distribution characteristic by crush condition of wood crusher", Proc. Korea Forestry Energy Research Society Conference, pp.81~83 (2011)
- Mubofu, E. B., "Castor oil as a potential renewable resource for the production of functional materials", Sustain. Chem. Processes., 4(11) (2016)[DOI]