소형 선박용 관성측정장치 개발을 위한 MEMS 기반 관성 센서의 평가와 선정
Evaluation and Selection of MEMS-Based Inertial Sensor to Implement Inertial Measurement Unit for a Small-Sized Vessel
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 논문에서는 소형 선박용 관성측정장치(Inertial Measurement Unit, IMU) 개발에 적합한 MEMS(Micro-Electro Mechanical System) 기반의 관성 센서 평가와 선정에 관하여 기술했다. 먼저, 오일러 공식에 기초한 관성 센서의 오차 모델과 잡음 모델을 정의하고, 앨런 분산(Allan Variance) 기법과 몬테카르로(Monte Carlo) 시뮬레이션 기법을 도입하여 관성 센서를 평가하였다. ADIS16405, SAR10Z,SAR100Grade100, LIS344ALH, ADXL103 등 다섯 가지 관성 센서에 대한 평가결과, ADIS16405의 자이로와 가속도계를 조합한 경우 오차가 가장 작게 나타났는데, 600 초 경과시 속도 오차의 표준편차가 약 160 m/s, 위치 오차의 표준편차가 약 35 km로 나타났다. 평가를 통해 ADIS16405 관성 센서가 IMU 구축에 최적임을 알았고, 이러한 오차 감소 방법에 대해서 참고문헌을 조사하여 검토하였다.
Abstract
This paper describes the evaluation and selection of MEMS(Micro-Elect Mechanical System) based inertial sensor to fit to implement the Inertial Measurement Unit(IMU) for a small-sized vessel at sea. At first, the error model and the noise model of the inertial sensors are defined with Euler's equations and then, the inertial sensor evaluation is carried out with Allan Variance techniques and Monte Carlo simulation. As evaluation results for the five sensors, ADIS16405, SAR10Z, SAR100Grade100, LIS344ALH and ADXL103, the combination of gyroscope and accelerometer of ADIS16405 is shown minimum error having around 160 m/s standard deviation of velocity error and around 35 km standard deviation of position error after 600 seconds. Thus, we select the ADIS16405 inertial sensor as a MEMS-based inertial sensor to implement IMU and, the error reducing method is also considered with the search for reference papers.
참고문헌 (22)
- "ADIS16405 data sheet"[URL]
- "ADXL103/ADXL203 data sheet"[URL]
- Fiber Optic Rate Gyros As Replacement for Mechanical Gyros, "Bennett S. M.", American Institute of Aeronautics and Astronautics, 1~7, pp.KVH Industries Inc. Report AIAA-98-4401 (1998)
- Analysis and Modeling of MEMS based Inertial Sensors, "Claudia C. Meruane Naranjo", Electrical Engineering, ungliga Tekniska Hgskolan, ~, pp.Stockholm, XR-EE-SB 2008:011 (2008)
- Chris Goodall, "The Development of a GPS", MEMS INS Integrated System Utilizing a Hybrid Processing Architecture, 2005, 1444~1455
- D.H.Titterton, "Strapdown Inertial Navigation Technology, 2nd Edition", Volume207 Progress in Astronautics and Aeronautics, pp.57~ (2009)
- "Monte Carlo Methods and Importance Sampling, Lecture Notes for Stat 578C/URL:"[URL]
- Giorgio De Pasquale, "Reliability Testing Procedure for MEMS IMUs Applied to Vibrating Environments", Sensors2010, 10, pp.456~474 (2010)
- I.Skog, "Calibration of a MEMS Inertial Measurement Unit", XVII IMEKO WORLD CONGRESS, pp.1~6 (2006)
- "Monte Carlo Methods, Tutorial Materials"[URL]
- "Lecture Note on the Principles of Scientific Computing, Chapter 9: Monte Carlo methods"[URL]
- Kim Mathiassen, "A low cost navigation unit for position estimation of personnel after loss of GPS position", 석사, pp.2010
- "MEMS Gyroscope Performance Comparing Using Allan Variance Method"[URL]
- Mohamed Gad-el-Hak, "MEMS Applications,2nd Edition", pp.1-1~11-1 (2006), Taylor & Francis
- Personal navigation system, "Peter Sherman", Draper Laboratory, ~, pp.Technical report NATRICK (2005), TR-06[DOI]
- "SAR10Z Gyro Sensor Series data sheet"[URL]
- "SAR100Grade100 Single-Axis Gyro data sheet"[URL]
- Songlai Han, "Using Allan Variance to Determine the Calibration Model of Inertial Sensors for GPS", INS Integration, 2009, 1~18
- "LIS344ALH data sheet"[URL]
- er Kempe, "Inertial MEMS Principles and Practice", pp.1~452 (2011), Cambridge University Press
- Walid Abdel-Hamid, "Accuracy Enhancement of Integrated MEMS-IMU", GPS Systems for Land Vehicular Navigation Applications, UCGE Reports Number 20207, University Calgary, 2005